Otis FGRC341 Ripcord 10mm/40 Cal Rifle/Pistol Firearm Cleaner, 5-40" Thread, Nomex/Rubber, 36" LengthOtis Technology$12.36
Loading...
Loading...
Loading...
Loading...
Otis Technology
The Otis Ripcord22 is a purpose-built bore cleaning tool designed specifically for .22 caliber rifles and the array of cartridges that share that bore diameter. Unlike traditional patch-and-rod systems that rely on gravity and multiple passes, this 36-inch cleaning tool uses a rigid, helix-shaped rubber core that maintains aggressive contact with the bore and rifling throughout a single pass from breech to muzzle. That aggressive engagement means faster fouling removal—especially useful when you're at the range and want to keep shooting or in the field where you need to travel light.
What makes the Ripcord22 genuinely different is the combination of materials. The braided Nomex cleaning surface wraps the rubber core and serves dual duty: the fibers loosen fouling particles while simultaneously capturing them, so you're both scrubbing and collecting in one motion. The Nomex can handle barrel heat up to 700 degrees Fahrenheit, so you're not limited to cooling-off time between cleaning cycles. That's a real advantage when you're working a hot barrel in the field or after a range session. The tool threads onto standard 5-40 adapters and runs 36 inches long, giving you enough length to work the entire bore without awkward angles or repositioning.
The Ripcord22 covers .22 rimfire, .22 Long Rifle, .22 Long, .22 Short, .22 Magnum, .220, and .22-250 cartridges—basically anything in the .22 bore family. For shooters who want an even more thorough clean, you can attach a bore brush to the system. It's compact enough to throw in a range bag or pack, effective enough to cut your cleaning time, and tough enough to handle hot-barrel maintenance without fussing over cooling periods.
| Caliber | .22 rimfire, .22 LR, .22 Long, .22 Short, .22 Magnum, .220, .22-250 |
| Length | 36 inches |
| Thread Size | 5-40 |
| Core Material | Molded rubberized core with helix design |
| Cleaning Surface | Braided Nomex fibers |
| Cleaning Surface Length | 10 inches |
| Heat Rating | Up to 700°F |
The Ripcord22 is designed for .22 rimfire (.22 LR), .22 Long, .22 Short, and .22 Magnum. It also covers centerfire cartridges with the same bore diameter, including .220 and .22-250. If your rifle is any .22 caliber, this tool will fit and clean it effectively.
Yes. The braided Nomex surface is heat-resistant up to 700 degrees Fahrenheit, so you can clean your barrel immediately after shooting without waiting for it to cool. This is especially handy during range sessions or field work when you want to maintain your rifle without downtime.
The Ripcord22 features a 5-40 thread that connects to standard adapters. It pairs with any rod or system using that thread size—a common specification in Otis and many other cleaning systems.
Yes. While the Ripcord22 delivers effective one-pass cleaning on its own, you can attach a bore brush to the system for even more thorough scrubbing when you want extra cleaning power.
Otis Technology
The Otis Ripcord22 is a purpose-built bore cleaning tool designed specifically for .22 caliber rifles and the array of cartridges that share that bore diameter. Unlike traditional patch-and-rod systems that rely on gravity and multiple passes, this 36-inch cleaning tool uses a rigid, helix-shaped rubber core that maintains aggressive contact with the bore and rifling throughout a single pass from breech to muzzle. That aggressive engagement means faster fouling removal—especially useful when you're at the range and want to keep shooting or in the field where you need to travel light.
What makes the Ripcord22 genuinely different is the combination of materials. The braided Nomex cleaning surface wraps the rubber core and serves dual duty: the fibers loosen fouling particles while simultaneously capturing them, so you're both scrubbing and collecting in one motion. The Nomex can handle barrel heat up to 700 degrees Fahrenheit, so you're not limited to cooling-off time between cleaning cycles. That's a real advantage when you're working a hot barrel in the field or after a range session. The tool threads onto standard 5-40 adapters and runs 36 inches long, giving you enough length to work the entire bore without awkward angles or repositioning.
The Ripcord22 covers .22 rimfire, .22 Long Rifle, .22 Long, .22 Short, .22 Magnum, .220, and .22-250 cartridges—basically anything in the .22 bore family. For shooters who want an even more thorough clean, you can attach a bore brush to the system. It's compact enough to throw in a range bag or pack, effective enough to cut your cleaning time, and tough enough to handle hot-barrel maintenance without fussing over cooling periods.
| Caliber | .22 rimfire, .22 LR, .22 Long, .22 Short, .22 Magnum, .220, .22-250 |
| Length | 36 inches |
| Thread Size | 5-40 |
| Core Material | Molded rubberized core with helix design |
| Cleaning Surface | Braided Nomex fibers |
| Cleaning Surface Length | 10 inches |
| Heat Rating | Up to 700°F |
The Ripcord22 is designed for .22 rimfire (.22 LR), .22 Long, .22 Short, and .22 Magnum. It also covers centerfire cartridges with the same bore diameter, including .220 and .22-250. If your rifle is any .22 caliber, this tool will fit and clean it effectively.
Yes. The braided Nomex surface is heat-resistant up to 700 degrees Fahrenheit, so you can clean your barrel immediately after shooting without waiting for it to cool. This is especially handy during range sessions or field work when you want to maintain your rifle without downtime.
The Ripcord22 features a 5-40 thread that connects to standard adapters. It pairs with any rod or system using that thread size—a common specification in Otis and many other cleaning systems.
Yes. While the Ripcord22 delivers effective one-pass cleaning on its own, you can attach a bore brush to the system for even more thorough scrubbing when you want extra cleaning power.