Loading...
Loading...
Loading...
Loading...
Maglula
The Maglula Gen II AR-15 magazine loader and unloader is a simple, practical tool that solves one of the most tedious tasks on the range or in the field: filling and emptying AR-pattern magazines by hand. Whether you're prepping mags for a long day at the range, breaking in new magazines, or maintaining your existing collection, this Gen II loader works with virtually every common 5.56x45mm and .223 Remington magazine on the market—USGI, Magpul PMAG, Lancer, Hexmag, and others—in 10, 20, 30, 40, and 100-round capacities.
Hand-loading magazines round after round takes a real toll. The Gen II eliminates the repetitive thumb strain that comes with seating rounds against a stiff magazine spring, and it prevents the accidental damage to feed lips that happens when you're rushing or fatigued. Over time, that protection adds up: your magazines stay reliable longer, and you avoid the frustration of prematurely worn or bent feed lips forcing you to retire a perfectly good mag. The loader works equally well in reverse, letting you safely unload a full magazine without wearing yourself out or risking fumbled rounds.
Built from reinforced polymer, the Gen II is lightweight enough to toss in a range bag or cargo pocket, yet durable enough to handle heavy use in all weather. It's proven in the field and trusted by shooters who run high volumes through their magazines. Operation is straightforward: load or unload mode is intuitive, and there's no learning curve. This is one of those unglamorous accessories that makes your shooting life noticeably better without any complexity.
| Brand | Maglula Ltd. |
| Model | Gen II AR-15 Magazine Loader & Unloader |
| Caliber/Magazine Type | 5.56x45mm NATO / .223 Remington |
| Compatible Magazines | USGI (NATO STANAG 4179), Magpul PMAG, Lancer, Hexmag, H&K metal, Beretta AR 70-90, SIG Arms, and others |
| Compatible Capacities | 10, 20, 30, 40, and 100-round magazines |
| Material | Reinforced polymer |
| Function | Magazine loader and unloader (dual-mode) |
The Gen II is designed for all standard AR-15 and M4 magazines in 5.56x45mm and .223 Remington, including USGI, Magpul PMAG, Lancer, Hexmag, H&K metal magazines, Beretta AR 70-90, and SIG Arms magazines. It accommodates 10, 20, 30, 40, and 100-round capacities. The loader may also work with some 6.8 SPC and 6.5 Grendel magazines, though compatibility with those cartridges is not guaranteed.
Yes. The Gen II is an all-in-one tool that works for both loading and unloading—simply switch modes depending on which direction you're working.
Hand-loading magazines causes fatigue and pain in your thumb from the repetitive pressure required to seat rounds against the magazine spring. The loader also prevents accidental damage to the feed lips that can happen during manual loading, which extends magazine life and keeps your mags reliable.
Yes. The loader is built from reinforced polymer and is tested to handle reliable, all-weather use in the field. It's lightweight enough for everyday carry in a range bag or pocket.
Maglula
The Maglula Gen II AR-15 magazine loader and unloader is a simple, practical tool that solves one of the most tedious tasks on the range or in the field: filling and emptying AR-pattern magazines by hand. Whether you're prepping mags for a long day at the range, breaking in new magazines, or maintaining your existing collection, this Gen II loader works with virtually every common 5.56x45mm and .223 Remington magazine on the market—USGI, Magpul PMAG, Lancer, Hexmag, and others—in 10, 20, 30, 40, and 100-round capacities.
Hand-loading magazines round after round takes a real toll. The Gen II eliminates the repetitive thumb strain that comes with seating rounds against a stiff magazine spring, and it prevents the accidental damage to feed lips that happens when you're rushing or fatigued. Over time, that protection adds up: your magazines stay reliable longer, and you avoid the frustration of prematurely worn or bent feed lips forcing you to retire a perfectly good mag. The loader works equally well in reverse, letting you safely unload a full magazine without wearing yourself out or risking fumbled rounds.
Built from reinforced polymer, the Gen II is lightweight enough to toss in a range bag or cargo pocket, yet durable enough to handle heavy use in all weather. It's proven in the field and trusted by shooters who run high volumes through their magazines. Operation is straightforward: load or unload mode is intuitive, and there's no learning curve. This is one of those unglamorous accessories that makes your shooting life noticeably better without any complexity.
| Brand | Maglula Ltd. |
| Model | Gen II AR-15 Magazine Loader & Unloader |
| Caliber/Magazine Type | 5.56x45mm NATO / .223 Remington |
| Compatible Magazines | USGI (NATO STANAG 4179), Magpul PMAG, Lancer, Hexmag, H&K metal, Beretta AR 70-90, SIG Arms, and others |
| Compatible Capacities | 10, 20, 30, 40, and 100-round magazines |
| Material | Reinforced polymer |
| Function | Magazine loader and unloader (dual-mode) |
The Gen II is designed for all standard AR-15 and M4 magazines in 5.56x45mm and .223 Remington, including USGI, Magpul PMAG, Lancer, Hexmag, H&K metal magazines, Beretta AR 70-90, and SIG Arms magazines. It accommodates 10, 20, 30, 40, and 100-round capacities. The loader may also work with some 6.8 SPC and 6.5 Grendel magazines, though compatibility with those cartridges is not guaranteed.
Yes. The Gen II is an all-in-one tool that works for both loading and unloading—simply switch modes depending on which direction you're working.
Hand-loading magazines causes fatigue and pain in your thumb from the repetitive pressure required to seat rounds against the magazine spring. The loader also prevents accidental damage to the feed lips that can happen during manual loading, which extends magazine life and keeps your mags reliable.
Yes. The loader is built from reinforced polymer and is tested to handle reliable, all-weather use in the field. It's lightweight enough for everyday carry in a range bag or pocket.
