Loading...
Loading...
Loading...
Loading...
Limbsaver
The Limbsaver Speed Mount Grind-to-Fit Medium Recoil Pad is a custom-fit recoil management solution built for shotgunners and riflemen who need to reduce felt recoil and muzzle jump without sacrificing speed or comfort. Unlike off-the-shelf pads, this grind-to-fit model lets you shape it to match your gun's unique geometry—critical when you're working with vintage shotguns, custom stocks, or rifles where standard pads don't sit flush.
At the heart of this pad is Limbsaver's NAVCOM synthetic material and two-chamber recoil system. As the gun fires, the lower chamber compresses first and directs recoil force downward, while internal impact pillars engage to distribute the shock and control collapse angle. The result is measurable muzzle jump reduction—up to 50% in many setups—so your follow-up shots land faster and truer. The redesigned geometry pays particular attention to shouldering speed: the beveled heel won't catch fabric or delay your mount, and the Easy Glide surface coating keeps the pad moving smoothly against your shoulder and clothing, not fighting it.
This is the working shooter's choice for serious recoil management. Whether you're running trap, skeet, 3-gun, hunting over rough country, or pushing long-range rifle loads, controlling muzzle jump means controlling accuracy. The 1-inch thickness strikes the balance between meaningful recoil absorption and a stock profile that doesn't bloat your cheek weld or sight picture. Note: this grind-to-fit model does not include mounting screws, so you'll need to either use your existing hardware or source appropriate fasteners for your stock.
| Material | NAVCOM synthetic rubber |
| Thickness | 1 inch |
| Size | Medium |
| Color | Black |
| Type | Grind-to-fit (custom shapeable) |
| Mounting Screws | Not included |
This pad ships without mounting screws, so you'll need to provide your own fasteners. Most shotgun and rifle stocks use standard wood screws; check your existing pad hardware or measure your stock screw holes to source compatible replacements. You'll also need a way to shape the pad to fit—a drum sander, belt sander, or even sandpaper and patience will work depending on the fit needed.
The two-chamber system and internal impact pillars are designed to reduce muzzle jump by as much as 50%, though actual results depend on your specific firearm, load, and how well the pad is fitted to your stock. A flush, secure fit is key to maximum effectiveness.
The beveled heel is specifically designed to eliminate prominent edges that can snag fabric, and the Easy Glide surface coating reduces friction with clothing and your shoulder. This means faster, smoother mounting without the pad binding or slowing you down.
Yes. The medium size and 1-inch thickness work on both shotguns and rifles. The grind-to-fit design lets you customize it to fit whatever stock you're working with, making it a versatile choice across different firearm types.
Limbsaver
The Limbsaver Speed Mount Grind-to-Fit Medium Recoil Pad is a custom-fit recoil management solution built for shotgunners and riflemen who need to reduce felt recoil and muzzle jump without sacrificing speed or comfort. Unlike off-the-shelf pads, this grind-to-fit model lets you shape it to match your gun's unique geometry—critical when you're working with vintage shotguns, custom stocks, or rifles where standard pads don't sit flush.
At the heart of this pad is Limbsaver's NAVCOM synthetic material and two-chamber recoil system. As the gun fires, the lower chamber compresses first and directs recoil force downward, while internal impact pillars engage to distribute the shock and control collapse angle. The result is measurable muzzle jump reduction—up to 50% in many setups—so your follow-up shots land faster and truer. The redesigned geometry pays particular attention to shouldering speed: the beveled heel won't catch fabric or delay your mount, and the Easy Glide surface coating keeps the pad moving smoothly against your shoulder and clothing, not fighting it.
This is the working shooter's choice for serious recoil management. Whether you're running trap, skeet, 3-gun, hunting over rough country, or pushing long-range rifle loads, controlling muzzle jump means controlling accuracy. The 1-inch thickness strikes the balance between meaningful recoil absorption and a stock profile that doesn't bloat your cheek weld or sight picture. Note: this grind-to-fit model does not include mounting screws, so you'll need to either use your existing hardware or source appropriate fasteners for your stock.
| Material | NAVCOM synthetic rubber |
| Thickness | 1 inch |
| Size | Medium |
| Color | Black |
| Type | Grind-to-fit (custom shapeable) |
| Mounting Screws | Not included |
This pad ships without mounting screws, so you'll need to provide your own fasteners. Most shotgun and rifle stocks use standard wood screws; check your existing pad hardware or measure your stock screw holes to source compatible replacements. You'll also need a way to shape the pad to fit—a drum sander, belt sander, or even sandpaper and patience will work depending on the fit needed.
The two-chamber system and internal impact pillars are designed to reduce muzzle jump by as much as 50%, though actual results depend on your specific firearm, load, and how well the pad is fitted to your stock. A flush, secure fit is key to maximum effectiveness.
The beveled heel is specifically designed to eliminate prominent edges that can snag fabric, and the Easy Glide surface coating reduces friction with clothing and your shoulder. This means faster, smoother mounting without the pad binding or slowing you down.
Yes. The medium size and 1-inch thickness work on both shotguns and rifles. The grind-to-fit design lets you customize it to fit whatever stock you're working with, making it a versatile choice across different firearm types.
