Loading...
Loading...
Loading...
Loading...
Griffin Armament
The Griffin Armament Optimus 7 Taper Mount is a .30-caliber suppressor built for shooters who want serious sound reduction without the excessive back pressure that plagues traditional cans. Using advanced additive manufacturing combined with a carefully engineered low-pressure baffle stack, this suppressor delivers genuine flash suppression and hearing protection in a package that won't beat up your rifle or throw off your ergonomics. The taper mount variant comes ready to install with the included EZ-Brake muzzle device—no separate parts to hunt down.
Griffin's Optimus 7 starts with a clean engineering concept: maximize internal volume and optimize gas flow to reduce system back pressure, then pair that with a quad-tine flash-killer endcap tuned to work in concert with the baffle design. The result is a suppressor that handles .308 Winchester, .300 Weatherby Magnum, and other standard .30-cal rounds with measurable effectiveness. Construction is 17-4 stainless steel throughout—the baffle core is 3D-printed then post-machined to a smooth finish, while the blast shield and mount are machined separately and laser-welded for durability and serviceability. If a catastrophic failure ever happens, Griffin's Perpetual Lifetime Warranty covers it, and the welded construction makes warranty claims straightforward.
At 1.73 inches in diameter, the Optimus 7 balances a genuinely useful internal volume with practical handling on typical hunting and precision rifles. The taper mount DUAL-LOK® system locks your suppressor on securely and repeats zero reliably. Black high-temperature Cerakote finish resists heat and wear. This is a suppressor designed by people who understand that back pressure matters—especially if you're running a precision rifle or hunting where you need to keep your rifle running clean and predictable.
| Caliber | .30 caliber (.308 Winchester, .300 Weatherby Magnum, and similar) |
| Mounting System | Taper Mount DUAL-LOK® |
| Diameter | 1.73 inches |
| Sound Reduction | -32.9 dB (measured at 135.9 dB on 16-inch .308 Winchester with M118LR ammunition) |
| Material | 17-4 H900 heat-treated stainless steel |
| Finish | Black high-temperature Cerakote |
| Included Muzzle Device | EZ-Brake (.30 caliber, 5/8×24 threads) |
| Full Auto Rated | Yes |
| Warranty | Perpetual Lifetime Warranty |
The Optimus 7 is optimized for .30-caliber rifle ammunition, including .308 Winchester, .300 Weatherby Magnum, and comparable .30-cal cartridges. The -32.9 dB reduction rating is based on testing with .308 Winchester M118LR ammunition fired from a 16-inch rifle.
The Griffin Armament Optimus 7 Taper Mount includes the suppressor body and an EZ-Brake muzzle device (.30 caliber, 5/8×24 threads) ready to install on your rifle. No additional muzzle devices or adapters are needed for this variant.
A low back pressure suppressor like the Optimus 7 reduces the force of gas cycling back into your firearm, which means less wear on internal parts, easier bolt manipulation, and more consistent performance over extended shooting sessions. This is especially valuable on precision rifles where reliability and repeatability matter.
Yes. The suppressor is manufactured from 17-4 H900 stainless steel throughout. The baffle core is 3D-printed then precision-machined, and the blast shield and mount are machined separately and laser-welded together, making the suppressor serviceable under Griffin's Perpetual Lifetime Warranty if a catastrophic failure occurs. It is also full-auto rated.
Griffin Armament
The Griffin Armament Optimus 7 Taper Mount is a .30-caliber suppressor built for shooters who want serious sound reduction without the excessive back pressure that plagues traditional cans. Using advanced additive manufacturing combined with a carefully engineered low-pressure baffle stack, this suppressor delivers genuine flash suppression and hearing protection in a package that won't beat up your rifle or throw off your ergonomics. The taper mount variant comes ready to install with the included EZ-Brake muzzle device—no separate parts to hunt down.
Griffin's Optimus 7 starts with a clean engineering concept: maximize internal volume and optimize gas flow to reduce system back pressure, then pair that with a quad-tine flash-killer endcap tuned to work in concert with the baffle design. The result is a suppressor that handles .308 Winchester, .300 Weatherby Magnum, and other standard .30-cal rounds with measurable effectiveness. Construction is 17-4 stainless steel throughout—the baffle core is 3D-printed then post-machined to a smooth finish, while the blast shield and mount are machined separately and laser-welded for durability and serviceability. If a catastrophic failure ever happens, Griffin's Perpetual Lifetime Warranty covers it, and the welded construction makes warranty claims straightforward.
At 1.73 inches in diameter, the Optimus 7 balances a genuinely useful internal volume with practical handling on typical hunting and precision rifles. The taper mount DUAL-LOK® system locks your suppressor on securely and repeats zero reliably. Black high-temperature Cerakote finish resists heat and wear. This is a suppressor designed by people who understand that back pressure matters—especially if you're running a precision rifle or hunting where you need to keep your rifle running clean and predictable.
| Caliber | .30 caliber (.308 Winchester, .300 Weatherby Magnum, and similar) |
| Mounting System | Taper Mount DUAL-LOK® |
| Diameter | 1.73 inches |
| Sound Reduction | -32.9 dB (measured at 135.9 dB on 16-inch .308 Winchester with M118LR ammunition) |
| Material | 17-4 H900 heat-treated stainless steel |
| Finish | Black high-temperature Cerakote |
| Included Muzzle Device | EZ-Brake (.30 caliber, 5/8×24 threads) |
| Full Auto Rated | Yes |
| Warranty | Perpetual Lifetime Warranty |
The Optimus 7 is optimized for .30-caliber rifle ammunition, including .308 Winchester, .300 Weatherby Magnum, and comparable .30-cal cartridges. The -32.9 dB reduction rating is based on testing with .308 Winchester M118LR ammunition fired from a 16-inch rifle.
The Griffin Armament Optimus 7 Taper Mount includes the suppressor body and an EZ-Brake muzzle device (.30 caliber, 5/8×24 threads) ready to install on your rifle. No additional muzzle devices or adapters are needed for this variant.
A low back pressure suppressor like the Optimus 7 reduces the force of gas cycling back into your firearm, which means less wear on internal parts, easier bolt manipulation, and more consistent performance over extended shooting sessions. This is especially valuable on precision rifles where reliability and repeatability matter.
Yes. The suppressor is manufactured from 17-4 H900 stainless steel throughout. The baffle core is 3D-printed then precision-machined, and the blast shield and mount are machined separately and laser-welded together, making the suppressor serviceable under Griffin's Perpetual Lifetime Warranty if a catastrophic failure occurs. It is also full-auto rated.
