Loading...
Loading...
Loading...
Loading...
Zaffiri
The Zaffiri Precision ZPS.2 slide for Glock 48/43X in Sniper Gray is a purpose-built optic-ready upper for shooters who want precision performance without compromise. Machined from a single billet of 17-4 stainless steel and manufactured entirely in-house at Zaffiri's Florida facility, this slide delivers the tight tolerances and accuracy gains that separate quality aftermarket slides from the rest. It's pre-cut, pre-coated, and ready to mount a modern red dot—no gunsmithing required.
The ZPS.2 ships with the optic cut already machined to accept Shield RMSc, Holosun 407K/507K, or Sig RomeoZero red dots. All three use the same footprint with no rear lugs and slightly lowered front lugs, so you have flexibility in optic choice without paying for custom work. The anodized black optic cover plate and mounting screws are included in the box; blue Loctite is recommended for retention, and you'll want to respect the optic manufacturer's torque specs during installation.
Built for the compact 9mm frame, the ZPS.2 works with both Glock 48 and Glock 43X platforms. The slide does not accommodate ported barrels—Zaffiri makes different models (ZPS.P and ZPS.4) for that application. Note that the slide arrives unassembled; you'll need to fit it to your frame and components. The Sniper Gray Cerakote finish is factory-applied and locked in—if you need a different color or optic cut, Zaffiri's Custom Line is the place to start.
| Brand | Zaffiri Precision |
| Model | ZPS.2 |
| Material | 17-4 Stainless Steel (Single Billet) |
| Caliber | 9mm |
| Platform Compatibility | Glock 48, Glock 43X |
| Optic Cut | Shield RMSc, Holosun 407K/507K, Sig RomeoZero |
| Finish | Sniper Gray Cerakote |
| Mounting Screw Thread | 6-32 |
| Accessories Included | Black Anodized Optic Cover Plate, Mounting Screws |
| Ported Barrel Compatible | No |
| Channel Liner Required | No |
| Assembly Status | Unassembled |
| Made in | USA (Largo, FL) |
Yes. The ZPS.2 is designed for Glock 48 and is also fully compatible with Glock 43X frames.
The pre-cut optic mount accepts Shield RMSc, Holosun 407K, Holosun 507K, and Sig RomeoZero red dots. All three use the same footprint on this slide, giving you flexibility in optic selection.
The slide is pre-cut and pre-coated, so no secondary machining is needed. However, it arrives unassembled and requires installation onto your frame and with your other components. The optic cover plate and screws are included. You'll need to apply blue Loctite to the mounting screws during optic installation.
No. The ZPS.2 is not compatible with ported barrels. Zaffiri makes the ZPS.P and ZPS.4 models for use with Zaffiri Precision ported barrels.
Zaffiri
The Zaffiri Precision ZPS.2 slide for Glock 48/43X in Sniper Gray is a purpose-built optic-ready upper for shooters who want precision performance without compromise. Machined from a single billet of 17-4 stainless steel and manufactured entirely in-house at Zaffiri's Florida facility, this slide delivers the tight tolerances and accuracy gains that separate quality aftermarket slides from the rest. It's pre-cut, pre-coated, and ready to mount a modern red dot—no gunsmithing required.
The ZPS.2 ships with the optic cut already machined to accept Shield RMSc, Holosun 407K/507K, or Sig RomeoZero red dots. All three use the same footprint with no rear lugs and slightly lowered front lugs, so you have flexibility in optic choice without paying for custom work. The anodized black optic cover plate and mounting screws are included in the box; blue Loctite is recommended for retention, and you'll want to respect the optic manufacturer's torque specs during installation.
Built for the compact 9mm frame, the ZPS.2 works with both Glock 48 and Glock 43X platforms. The slide does not accommodate ported barrels—Zaffiri makes different models (ZPS.P and ZPS.4) for that application. Note that the slide arrives unassembled; you'll need to fit it to your frame and components. The Sniper Gray Cerakote finish is factory-applied and locked in—if you need a different color or optic cut, Zaffiri's Custom Line is the place to start.
| Brand | Zaffiri Precision |
| Model | ZPS.2 |
| Material | 17-4 Stainless Steel (Single Billet) |
| Caliber | 9mm |
| Platform Compatibility | Glock 48, Glock 43X |
| Optic Cut | Shield RMSc, Holosun 407K/507K, Sig RomeoZero |
| Finish | Sniper Gray Cerakote |
| Mounting Screw Thread | 6-32 |
| Accessories Included | Black Anodized Optic Cover Plate, Mounting Screws |
| Ported Barrel Compatible | No |
| Channel Liner Required | No |
| Assembly Status | Unassembled |
| Made in | USA (Largo, FL) |
Yes. The ZPS.2 is designed for Glock 48 and is also fully compatible with Glock 43X frames.
The pre-cut optic mount accepts Shield RMSc, Holosun 407K, Holosun 507K, and Sig RomeoZero red dots. All three use the same footprint on this slide, giving you flexibility in optic selection.
The slide is pre-cut and pre-coated, so no secondary machining is needed. However, it arrives unassembled and requires installation onto your frame and with your other components. The optic cover plate and screws are included. You'll need to apply blue Loctite to the mounting screws during optic installation.
No. The ZPS.2 is not compatible with ported barrels. Zaffiri makes the ZPS.P and ZPS.4 models for use with Zaffiri Precision ported barrels.
