Loading...
Loading...
Loading...
Loading...
Zaffiri
The Zaffiri Precision ZPS.2 Slide for Glock 43/43X is a precision-engineered, optic-ready aftermarket slide built for shooters who demand tight tolerances and accurate performance. Machined from billet 17-4 stainless steel at Zaffiri's facility in Largo, Florida, this slide is 100% American made and comes pre-cut and pre-coated for immediate installation. The Sniper Gray Cerakote finish delivers a professional, subdued look that works equally well on the range or in the field.
This is a stripped slide—no parts are assembled—so you'll install it on your existing Glock 43 or 43X frame. The optics-ready cut accommodates Shield RMSc, Holosun 407K/507K, or Sig RomeoZero red dot sights with a unified footprint, meaning you can swap optics without re-zeroing the cut. An optic cover plate and screws are included; Zaffiri recommends blue Loctite and adherence to your optic manufacturer's torque specs for secure mounting.
Important note: this slide is NOT ported-compatible. If you're running a ported barrel, you'll need the ZPS.P or ZPS.4 model instead. The tight tolerances and single-billet construction make this slide a solid choice for shooters building a carry-grade 9mm or upgrading a stock Glock 43X with better accuracy and a modern optics platform.
| Brand | Zaffiri Precision |
| Model | ZPS.2 |
| Caliber | 9mm |
| Fits | Glock 43, Glock 43X |
| Material | Billet 17-4 stainless steel |
| Finish | Sniper Gray Cerakote |
| Optic Cut | Shield RMSc, Holosun 407K/507K, Sig RomeoZero (same footprint, no rear lugs, lowered front lugs) |
| Screw Size | 6-32 thread |
| Included | Optic cover plate and screws |
| Ported Barrel Compatible | No |
| Assembly | Stripped slide (no parts assembled) |
Yes, the ZPS.2 is designed to fit both Glock 43 and Glock 43X frames.
The optics-ready cut is compatible with Shield RMSc, Holosun 407K/507K, and Sig RomeoZero red dots. All three share the same footprint on this slide, with no rear lugs and slightly lowered front lugs.
No. This slide is not ported-compatible. If you need a ported barrel setup, the ZPS.P or ZPS.4 models are the correct choice.
The slide comes with a black anodized optic cover plate and mounting screws (6-32 thread). Zaffiri recommends blue Loctite for proper sight retention and following your optic manufacturer's torque specifications.
Zaffiri
The Zaffiri Precision ZPS.2 Slide for Glock 43/43X is a precision-engineered, optic-ready aftermarket slide built for shooters who demand tight tolerances and accurate performance. Machined from billet 17-4 stainless steel at Zaffiri's facility in Largo, Florida, this slide is 100% American made and comes pre-cut and pre-coated for immediate installation. The Sniper Gray Cerakote finish delivers a professional, subdued look that works equally well on the range or in the field.
This is a stripped slide—no parts are assembled—so you'll install it on your existing Glock 43 or 43X frame. The optics-ready cut accommodates Shield RMSc, Holosun 407K/507K, or Sig RomeoZero red dot sights with a unified footprint, meaning you can swap optics without re-zeroing the cut. An optic cover plate and screws are included; Zaffiri recommends blue Loctite and adherence to your optic manufacturer's torque specs for secure mounting.
Important note: this slide is NOT ported-compatible. If you're running a ported barrel, you'll need the ZPS.P or ZPS.4 model instead. The tight tolerances and single-billet construction make this slide a solid choice for shooters building a carry-grade 9mm or upgrading a stock Glock 43X with better accuracy and a modern optics platform.
| Brand | Zaffiri Precision |
| Model | ZPS.2 |
| Caliber | 9mm |
| Fits | Glock 43, Glock 43X |
| Material | Billet 17-4 stainless steel |
| Finish | Sniper Gray Cerakote |
| Optic Cut | Shield RMSc, Holosun 407K/507K, Sig RomeoZero (same footprint, no rear lugs, lowered front lugs) |
| Screw Size | 6-32 thread |
| Included | Optic cover plate and screws |
| Ported Barrel Compatible | No |
| Assembly | Stripped slide (no parts assembled) |
Yes, the ZPS.2 is designed to fit both Glock 43 and Glock 43X frames.
The optics-ready cut is compatible with Shield RMSc, Holosun 407K/507K, and Sig RomeoZero red dots. All three share the same footprint on this slide, with no rear lugs and slightly lowered front lugs.
No. This slide is not ported-compatible. If you need a ported barrel setup, the ZPS.P or ZPS.4 models are the correct choice.
The slide comes with a black anodized optic cover plate and mounting screws (6-32 thread). Zaffiri recommends blue Loctite for proper sight retention and following your optic manufacturer's torque specifications.
