Loading...
Loading...
Loading...
Loading...
Yankee Hill Machine
The Yankee Hill Machine Universal Rifle Suppressor Mount 1/2-36 Thread Adapter is a straightforward solution for shooters who want to repurpose existing suppressors on barrels with 1/2-36 threading. If you've invested in a quality suppressor from another manufacturer but need it to fit a different barrel, this adapter lets you convert that suppressor to a direct-mount system without purchasing new hardware. It's the kind of practical accessory that extends the utility of your existing gear—no unnecessary complexity, just effective engineering.
Installation is refreshingly simple. You remove the original mount from your suppressor, thread this adapter on using a 3/4-inch open-end wrench, and then screw the now-two-piece assembly onto your barrel. The design is intentionally foolproof; there's virtually no way to install it incorrectly or have it work loose during use, yet removal for cleaning or barrel changes is straightforward. That balance between security and ease of use is what sets a well-designed adapter apart.
Built from 17-4PH heat-treated steel and finished with a Melonite QPQ coating, this mount is engineered for durability and corrosion resistance. The Melonite process hardens the surface, which means it'll stand up to repeated installation cycles and the environmental wear of field use. At less than 1.7 ounces, it adds minimal weight to your system while providing the strength to handle the pressures of suppressor use.
| Manufacturer | Yankee Hill Machine Co |
| Barrel Thread Size | 1/2-36 |
| Mount Thread Pitch | 1-3/8-24 |
| Material | 17-4PH Heat-Treated Steel |
| Finish | Melonite QPQ |
| Weight | 1.696 oz |
This adapter is designed for barrels with 1/2-36 threading. Make sure your barrel matches this specification before ordering.
Yes, as long as your suppressor has a removable mount that can be unscrewed. You remove the existing mount mechanism from the suppressor and thread this adapter on in its place, then attach it to your 1/2-36 barrel.
You'll need a 3/4-inch open-end wrench to thread the adapter onto your suppressor. No special tools are required for installation onto your barrel.
The adapter is made from 17-4PH heat-treated steel with a Melonite QPQ finish, which provides both hardness and corrosion resistance. It's designed to withstand repeated installation and removal cycles.
Yankee Hill Machine
The Yankee Hill Machine Universal Rifle Suppressor Mount 1/2-36 Thread Adapter is a straightforward solution for shooters who want to repurpose existing suppressors on barrels with 1/2-36 threading. If you've invested in a quality suppressor from another manufacturer but need it to fit a different barrel, this adapter lets you convert that suppressor to a direct-mount system without purchasing new hardware. It's the kind of practical accessory that extends the utility of your existing gear—no unnecessary complexity, just effective engineering.
Installation is refreshingly simple. You remove the original mount from your suppressor, thread this adapter on using a 3/4-inch open-end wrench, and then screw the now-two-piece assembly onto your barrel. The design is intentionally foolproof; there's virtually no way to install it incorrectly or have it work loose during use, yet removal for cleaning or barrel changes is straightforward. That balance between security and ease of use is what sets a well-designed adapter apart.
Built from 17-4PH heat-treated steel and finished with a Melonite QPQ coating, this mount is engineered for durability and corrosion resistance. The Melonite process hardens the surface, which means it'll stand up to repeated installation cycles and the environmental wear of field use. At less than 1.7 ounces, it adds minimal weight to your system while providing the strength to handle the pressures of suppressor use.
| Manufacturer | Yankee Hill Machine Co |
| Barrel Thread Size | 1/2-36 |
| Mount Thread Pitch | 1-3/8-24 |
| Material | 17-4PH Heat-Treated Steel |
| Finish | Melonite QPQ |
| Weight | 1.696 oz |
This adapter is designed for barrels with 1/2-36 threading. Make sure your barrel matches this specification before ordering.
Yes, as long as your suppressor has a removable mount that can be unscrewed. You remove the existing mount mechanism from the suppressor and thread this adapter on in its place, then attach it to your 1/2-36 barrel.
You'll need a 3/4-inch open-end wrench to thread the adapter onto your suppressor. No special tools are required for installation onto your barrel.
The adapter is made from 17-4PH heat-treated steel with a Melonite QPQ finish, which provides both hardness and corrosion resistance. It's designed to withstand repeated installation and removal cycles.
