Loading...
Loading...
Loading...
Loading...
Weatherby
The Weatherby Mark V Guide Ti in 6.5 RPM with a 22-inch barrel and muzzle brake is a lightweight, backcountry-focused rifle built for hunters who refuse to compromise on precision or pack weight. Built around Weatherby's titanium action—machined in Sheridan, Wyoming to exacting tolerances—this rifle leverages titanium's exceptional strength-to-weight ratio and natural corrosion resistance to deliver a durable, nimble platform for mountain and remote hunting in unforgiving conditions.
The rifle's 6.5 RPM chambering pairs ballistic efficiency with manageable recoil, and the 22-inch barrel preserves velocity while keeping overall length and weight in check. The threaded muzzle accommodates the included titanium Accubrake ST (. 625-24 pitch), which helps tame felt recoil and gives you the option to add a suppressor down the road. The deep spiral-fluted bolt design reduces weight while improving bolt reliability and smoothness during cycling—a hallmark of rifles built to perform in the field, not just at the bench.
Completing the package is a Peak 44 Blacktooth stock with a hand-painted finish, integrating two Spartan Precision gunsmithing adapters for seamless pairing with ultra-lightweight aftermarket accessories. The 3DHex recoil pad uses a honeycomb structure that collapses progressively to transform sharp recoil into manageable impulse—especially valuable in a magnum-capable rifle. An adjustable TriggerTech trigger lets you dial in your preferred pull weight, giving you control over one of the most personal aspects of your shooting experience.
Whether you're glassing high ridges for elk or threading through dense timber after mule deer, the Mark V Guide Ti delivers the weight savings and weather resistance demanded by serious backcountry hunters.
| Brand | Weatherby |
| Model | Mark V Guide Ti |
| Chambering | 6.5 RPM |
| Barrel Length | 22 inches |
| Barrel Profile | Deep spiral-fluted |
| Muzzle | Threaded (.625-24) |
| Included Muzzle Device | Titanium Accubrake ST |
| Action Material | Titanium |
| Stock | Peak 44 Blacktooth with hand-applied finish |
| Recoil Pad | 3DHex honeycomb design |
| Trigger | Adjustable TriggerTech |
| Stock Adapters | Two Spartan Precision gunsmithing-compatible slots |
| Orientation | Right-hand |
Titanium has an exceptional strength-to-weight ratio, allowing Weatherby to achieve the same structural integrity and precision tolerances as a steel action while significantly reducing overall rifle weight. This is especially valuable in a backcountry hunting rifle where every ounce counts on long days in the mountains.
Yes. Titanium is naturally corrosion-resistant, making the Mark V Guide Ti well-suited to hunting in harsh, wet, or salty environments where steel would require vigilant maintenance.
The included titanium Accubrake ST has a threaded muzzle (.625-24 pitch), making it compatible with aftermarket suppressors designed for that thread pattern. You would remove or replace the brake to mount a suppressor.
The two integrated adapter slots allow you to attach a wide variety of Spartan Precision gunsmithing accessories—such as light mounts, sling attachments, and other modular add-ons—without permanent modifications to the stock.
Yes. The adjustable TriggerTech trigger lets you fine-tune the pull weight to suit your preference and shooting style.
Weatherby
The Weatherby Mark V Guide Ti in 6.5 RPM with a 22-inch barrel and muzzle brake is a lightweight, backcountry-focused rifle built for hunters who refuse to compromise on precision or pack weight. Built around Weatherby's titanium action—machined in Sheridan, Wyoming to exacting tolerances—this rifle leverages titanium's exceptional strength-to-weight ratio and natural corrosion resistance to deliver a durable, nimble platform for mountain and remote hunting in unforgiving conditions.
The rifle's 6.5 RPM chambering pairs ballistic efficiency with manageable recoil, and the 22-inch barrel preserves velocity while keeping overall length and weight in check. The threaded muzzle accommodates the included titanium Accubrake ST (. 625-24 pitch), which helps tame felt recoil and gives you the option to add a suppressor down the road. The deep spiral-fluted bolt design reduces weight while improving bolt reliability and smoothness during cycling—a hallmark of rifles built to perform in the field, not just at the bench.
Completing the package is a Peak 44 Blacktooth stock with a hand-painted finish, integrating two Spartan Precision gunsmithing adapters for seamless pairing with ultra-lightweight aftermarket accessories. The 3DHex recoil pad uses a honeycomb structure that collapses progressively to transform sharp recoil into manageable impulse—especially valuable in a magnum-capable rifle. An adjustable TriggerTech trigger lets you dial in your preferred pull weight, giving you control over one of the most personal aspects of your shooting experience.
Whether you're glassing high ridges for elk or threading through dense timber after mule deer, the Mark V Guide Ti delivers the weight savings and weather resistance demanded by serious backcountry hunters.
| Brand | Weatherby |
| Model | Mark V Guide Ti |
| Chambering | 6.5 RPM |
| Barrel Length | 22 inches |
| Barrel Profile | Deep spiral-fluted |
| Muzzle | Threaded (.625-24) |
| Included Muzzle Device | Titanium Accubrake ST |
| Action Material | Titanium |
| Stock | Peak 44 Blacktooth with hand-applied finish |
| Recoil Pad | 3DHex honeycomb design |
| Trigger | Adjustable TriggerTech |
| Stock Adapters | Two Spartan Precision gunsmithing-compatible slots |
| Orientation | Right-hand |
Titanium has an exceptional strength-to-weight ratio, allowing Weatherby to achieve the same structural integrity and precision tolerances as a steel action while significantly reducing overall rifle weight. This is especially valuable in a backcountry hunting rifle where every ounce counts on long days in the mountains.
Yes. Titanium is naturally corrosion-resistant, making the Mark V Guide Ti well-suited to hunting in harsh, wet, or salty environments where steel would require vigilant maintenance.
The included titanium Accubrake ST has a threaded muzzle (.625-24 pitch), making it compatible with aftermarket suppressors designed for that thread pattern. You would remove or replace the brake to mount a suppressor.
The two integrated adapter slots allow you to attach a wide variety of Spartan Precision gunsmithing accessories—such as light mounts, sling attachments, and other modular add-ons—without permanent modifications to the stock.
Yes. The adjustable TriggerTech trigger lets you fine-tune the pull weight to suit your preference and shooting style.
