Warne MSR Extended Skeletonized 1" Mount, 20 MOA, Tactical GrayWarne Scope Mounts$151.49
Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne MSR Extended Skeletonized 34mm Mount in Tactical Gray is a purpose-built scope base for shooters serious about long-range precision. Built with 20 MOA of built-in slope, this mount gives your elevation turret extra adjustment room when you're pushing shots past 600 yards—keeping your scope's windage centered and giving you the mechanical travel to stay in the fight at distance. The extended design also provides an extra inch of forward cantilever compared to standard skeletonized mounts, which means better eye relief when you're running scopes with larger exit pupils and maintains clearance for rail-mounted accessories like 45-degree offset adapters.
Warne machined this mount from 6061 aluminum and cut weight by over 30 percent versus their solid R.A.M.P. design by using a skeletonized body and ring caps. That matters on a precision rifle where every ounce adds up over a long hunt or day at the range. The 34mm ring diameter fits standard modern scope tubes and handles the recoil loads of hunting rifles and precision platforms alike. Tactical Gray anodizing resists corrosion and mirrors the aesthetic of modern AR and chassis builds without the gloss of lighter finishes.
This is a no-nonsense mount for shooters who demand precision geometry and aren't interested in gimmicks. Warne's engineering shows in the attention to cantilever length, the built-in slope correction, and the weight savings—features that actually matter in the field or on the bench. If you're building a long-range rig and need a mount that lets your scope perform at distance, this is the kind of foundation that doesn't compromise.
| Ring Diameter | 34mm |
| Built-in Slope | 20 MOA |
| Material | 6061 aluminum |
| Finish | Tactical Gray anodize |
| Mount Type | Skeletonized extended cantilever |
The Warne MSR Extended Skeletonized Mount is designed for modern tactical platforms and standard Picatinny/Weaver rails common on AR-15s, AR-10s, and other precision rifles. Verify your rifle's rail system before ordering.
This mount accommodates 34mm scope tubes, the standard for modern high-power hunting and precision rifle optics.
The 20 MOA slope is machined into the base to tilt your scope upward, giving your elevation turret additional mechanical adjustment room for long-range shooting. This keeps your windage centered on the scope while you dial for distance, critical for precision shooting beyond 600 yards where even small scope adjustments affect bullet impact.
Yes. The extended cantilever design maintains clearance behind the main mount for rail-mounted accessories like the Warne A645 45-degree side mount adapter and other common tactical attachments.
Warne Scope Mounts
The Warne MSR Extended Skeletonized 34mm Mount in Tactical Gray is a purpose-built scope base for shooters serious about long-range precision. Built with 20 MOA of built-in slope, this mount gives your elevation turret extra adjustment room when you're pushing shots past 600 yards—keeping your scope's windage centered and giving you the mechanical travel to stay in the fight at distance. The extended design also provides an extra inch of forward cantilever compared to standard skeletonized mounts, which means better eye relief when you're running scopes with larger exit pupils and maintains clearance for rail-mounted accessories like 45-degree offset adapters.
Warne machined this mount from 6061 aluminum and cut weight by over 30 percent versus their solid R.A.M.P. design by using a skeletonized body and ring caps. That matters on a precision rifle where every ounce adds up over a long hunt or day at the range. The 34mm ring diameter fits standard modern scope tubes and handles the recoil loads of hunting rifles and precision platforms alike. Tactical Gray anodizing resists corrosion and mirrors the aesthetic of modern AR and chassis builds without the gloss of lighter finishes.
This is a no-nonsense mount for shooters who demand precision geometry and aren't interested in gimmicks. Warne's engineering shows in the attention to cantilever length, the built-in slope correction, and the weight savings—features that actually matter in the field or on the bench. If you're building a long-range rig and need a mount that lets your scope perform at distance, this is the kind of foundation that doesn't compromise.
| Ring Diameter | 34mm |
| Built-in Slope | 20 MOA |
| Material | 6061 aluminum |
| Finish | Tactical Gray anodize |
| Mount Type | Skeletonized extended cantilever |
The Warne MSR Extended Skeletonized Mount is designed for modern tactical platforms and standard Picatinny/Weaver rails common on AR-15s, AR-10s, and other precision rifles. Verify your rifle's rail system before ordering.
This mount accommodates 34mm scope tubes, the standard for modern high-power hunting and precision rifle optics.
The 20 MOA slope is machined into the base to tilt your scope upward, giving your elevation turret additional mechanical adjustment room for long-range shooting. This keeps your windage centered on the scope while you dial for distance, critical for precision shooting beyond 600 yards where even small scope adjustments affect bullet impact.
Yes. The extended cantilever design maintains clearance behind the main mount for rail-mounted accessories like the Warne A645 45-degree side mount adapter and other common tactical attachments.
