Warne MSR Extended Skeletonized 34mm Mount, Tactical Gray, 20 MOAWarne Scope Mounts$189.99
Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne MSR Extended Skeletonized 34mm Mount is a lightweight, precision scope mount built for long-range hunters and competitive shooters who need extra elevation adjustment without carrying excess weight. This 34mm mount combines a 20 MOA built-in slope with a skeletonized aluminum design that sheds over 30% of the weight compared to traditional solid mounts—a genuine advantage when you're glassing hillsides or making the stalk back to your truck. The extended cantilever gives you proper eye relief with modern scopes featuring large eye boxes, and it clears space behind the mount for adding accessories like 45-degree offset mounts.
If you're shooting beyond 600 yards—whether hunting in the West, running a precision rifle course, or chasing groups at a distant range—that 20 MOA slope keeps you from burning up scope elevation quickly. Warne machines each mount from 6061 aluminum and secures it with #8 Torx fasteners backed by steel threaded inserts, so you get solid, repeatable clamping without fuss. This is no mall-ninja ultralight gimmick; it's serious reduction in unnecessary bulk.
The skeletonized body and ring caps do the real work—they're not skeletal because they look cool, but because removing material where it doesn't matter is the smartest way to make a rifle handier without compromising rigidity. If you build rifles around weight penalties or just hate carrying more than you have to, this mount earns its place on your gun.
| Mount Type | 34mm scope ring mount |
| Built-in MOA Slope | 20 MOA |
| Material | 6061 aluminum (skeletonized body and caps) |
| Fastener Type | #8 Torx with steel threaded inserts |
| Design Feature | Extended cantilever |
| Color | Black |
A 20 MOA built-in slope tilts the mount upward, giving your scope's elevation knob more room to adjust upward without maxing out. This is essential for long-range shooting beyond 600 yards, where you need additional elevation travel that would otherwise run out of adjustment in a level mount.
Yes—this is a 34mm scope ring mount. If your scope has 34mm tubes, it will fit. If your scope uses 30mm or 1-inch tubes, you'll need a different ring size.
The extended cantilever moves the scope forward relative to the rifle receiver. This gives you proper eye relief—the ideal distance between your eye and the scope's rear lens—especially important when using modern scopes with large objective bells and wide eye boxes. It also creates space behind the mount for accessories like 45-degree offset mounts.
The skeletonized body and caps reduce weight by over 30% compared to Warne's R.A.M.P. Mount design, making it a solid choice if weight matters to your rifle setup.
Warne Scope Mounts
The Warne MSR Extended Skeletonized 34mm Mount is a lightweight, precision scope mount built for long-range hunters and competitive shooters who need extra elevation adjustment without carrying excess weight. This 34mm mount combines a 20 MOA built-in slope with a skeletonized aluminum design that sheds over 30% of the weight compared to traditional solid mounts—a genuine advantage when you're glassing hillsides or making the stalk back to your truck. The extended cantilever gives you proper eye relief with modern scopes featuring large eye boxes, and it clears space behind the mount for adding accessories like 45-degree offset mounts.
If you're shooting beyond 600 yards—whether hunting in the West, running a precision rifle course, or chasing groups at a distant range—that 20 MOA slope keeps you from burning up scope elevation quickly. Warne machines each mount from 6061 aluminum and secures it with #8 Torx fasteners backed by steel threaded inserts, so you get solid, repeatable clamping without fuss. This is no mall-ninja ultralight gimmick; it's serious reduction in unnecessary bulk.
The skeletonized body and ring caps do the real work—they're not skeletal because they look cool, but because removing material where it doesn't matter is the smartest way to make a rifle handier without compromising rigidity. If you build rifles around weight penalties or just hate carrying more than you have to, this mount earns its place on your gun.
| Mount Type | 34mm scope ring mount |
| Built-in MOA Slope | 20 MOA |
| Material | 6061 aluminum (skeletonized body and caps) |
| Fastener Type | #8 Torx with steel threaded inserts |
| Design Feature | Extended cantilever |
| Color | Black |
A 20 MOA built-in slope tilts the mount upward, giving your scope's elevation knob more room to adjust upward without maxing out. This is essential for long-range shooting beyond 600 yards, where you need additional elevation travel that would otherwise run out of adjustment in a level mount.
Yes—this is a 34mm scope ring mount. If your scope has 34mm tubes, it will fit. If your scope uses 30mm or 1-inch tubes, you'll need a different ring size.
The extended cantilever moves the scope forward relative to the rifle receiver. This gives you proper eye relief—the ideal distance between your eye and the scope's rear lens—especially important when using modern scopes with large objective bells and wide eye boxes. It also creates space behind the mount for accessories like 45-degree offset mounts.
The skeletonized body and caps reduce weight by over 30% compared to Warne's R.A.M.P. Mount design, making it a solid choice if weight matters to your rifle setup.
