Warne Maxima Fixed 30mm Rings Matte Medium for CZ527 (16mm Dovetail)Warne Scope Mounts$75.99
Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne Maxima Fixed 30mm Rings in matte finish and high profile are purpose-built scope rings for CZ527 rifles with 16mm dovetail receivers. Unlike universal rings that require compromise, these are precision-machined to fit your CZ's proprietary dovetail directly—no mounting base needed. If you shoot a CZ527 and want a scope mounted right the first time, these rings eliminate guesswork and give you a solid, repeatable platform for hunting, target work, or precision shooting.
Each ring uses four T-15 Torx socket cap screws for permanent, rock-solid attachment. Warne engineered a CZ-specific recoil pin that engages positively with your receiver's dovetail geometry, so the rings stay put under recoil. The high profile design gives you the clearance you need if your CZ527 has iron sights or a raised receiver profile. Matte finish resists glare and won't snag on gear in the field or truck.
Installation is straightforward: mount the rings to your receiver dovetail, seat your scope in the ring bodies, and tighten the screws to the recommended torque spec. Because these are fixed rings, your scope won't shift or loosen—it's a permanent installation that works. Choose Warne Maxima rings if you want the confidence of a manufacturer-specific fit on your CZ527.
| Tube Diameter | 30mm |
| Profile | High |
| Fit | CZ527 (16mm dovetail) |
| Ring Type | Fixed |
| Fastener Type | T-15 Torx socket cap screw (qty. 4) |
| Recommended Torque | 25 in/lbs |
| Finish | Matte |
Yes. The Warne Maxima rings are machined to fit the CZ527's 16mm dovetail directly. You don't need a separate mounting base—the rings attach straight to your receiver.
These are 30mm rings, designed for scopes with 30mm main tubes.
Warne recommends 25 in/lbs of torque on the four T-15 Torx socket cap screws.
No. These rings are specific to the CZ527 with its 16mm dovetail. CZ550 receivers use a 19mm dovetail and require a different ring model.
Warne Scope Mounts
The Warne Maxima Fixed 30mm Rings in matte finish and high profile are purpose-built scope rings for CZ527 rifles with 16mm dovetail receivers. Unlike universal rings that require compromise, these are precision-machined to fit your CZ's proprietary dovetail directly—no mounting base needed. If you shoot a CZ527 and want a scope mounted right the first time, these rings eliminate guesswork and give you a solid, repeatable platform for hunting, target work, or precision shooting.
Each ring uses four T-15 Torx socket cap screws for permanent, rock-solid attachment. Warne engineered a CZ-specific recoil pin that engages positively with your receiver's dovetail geometry, so the rings stay put under recoil. The high profile design gives you the clearance you need if your CZ527 has iron sights or a raised receiver profile. Matte finish resists glare and won't snag on gear in the field or truck.
Installation is straightforward: mount the rings to your receiver dovetail, seat your scope in the ring bodies, and tighten the screws to the recommended torque spec. Because these are fixed rings, your scope won't shift or loosen—it's a permanent installation that works. Choose Warne Maxima rings if you want the confidence of a manufacturer-specific fit on your CZ527.
| Tube Diameter | 30mm |
| Profile | High |
| Fit | CZ527 (16mm dovetail) |
| Ring Type | Fixed |
| Fastener Type | T-15 Torx socket cap screw (qty. 4) |
| Recommended Torque | 25 in/lbs |
| Finish | Matte |
Yes. The Warne Maxima rings are machined to fit the CZ527's 16mm dovetail directly. You don't need a separate mounting base—the rings attach straight to your receiver.
These are 30mm rings, designed for scopes with 30mm main tubes.
Warne recommends 25 in/lbs of torque on the four T-15 Torx socket cap screws.
No. These rings are specific to the CZ527 with its 16mm dovetail. CZ550 receivers use a 19mm dovetail and require a different ring model.