Warne Maxima Fixed 30mm Rings Matte Medium for CZ527 (16mm Dovetail)Warne Scope Mounts$75.99
Loading...
Loading...
Loading...
Loading...
Warne Scope Mounts
The Warne Maxima 1" Fixed Rings in Medium for CZ527 16mm dovetail mounting offer a direct, no-fuss way to attach a rifle scope to your CZ 527 receiver. Unlike universal rings that require a separate base, these CZ-specific fixed rings machine directly onto your rifle's dovetail, eliminating extra components and potential alignment headaches. They're built to tight tolerances so they fit right where they belong—no adapters, no guesswork.
If you're running a CZ 527 and want a solid, permanent optics platform, these rings deliver. The matte finish keeps glare down and blends with most rifle finishes. Each ring uses four T-15 Torx socket cap screws for a secure clamp that won't shift under recoil, and a CZ-specific recoil pin ensures positive engagement with your receiver's dovetail geometry. Once torqued to spec and left alone, they stay put.
Warne has built a reputation for dependable scope rings and mounts across dozens of rifle platforms, and these CZ rings follow that tradition. They're the kind of accessory that works without drama—you mount your scope, dial it in, and forget about the rings themselves. That's exactly what you want from a scope mounting system.
| Ring Diameter | 1 inch |
| Ring Height | Medium |
| Dovetail Compatibility | CZ527 16mm |
| Fastener Type | T-15 Torx socket cap screws (qty. 4) |
| Finish | Matte |
| Recommended Torque | 25 in/lb |
Yes—these are sized for the CZ527 with its 16mm dovetail. They won't fit CZ 550 receivers, which use a 19mm dovetail. Verify your rifle's model before ordering.
No. These rings mount directly to your CZ527's receiver dovetail without a base. That's one fewer component and one fewer potential point of failure.
These are 1-inch rings, so they fit standard 1-inch diameter scopes.
Use 25 in/lb of torque on the T-15 Torx socket cap screws. This clamps the scope securely without over-tightening and damaging the optic tube.
Warne Scope Mounts
The Warne Maxima 1" Fixed Rings in Medium for CZ527 16mm dovetail mounting offer a direct, no-fuss way to attach a rifle scope to your CZ 527 receiver. Unlike universal rings that require a separate base, these CZ-specific fixed rings machine directly onto your rifle's dovetail, eliminating extra components and potential alignment headaches. They're built to tight tolerances so they fit right where they belong—no adapters, no guesswork.
If you're running a CZ 527 and want a solid, permanent optics platform, these rings deliver. The matte finish keeps glare down and blends with most rifle finishes. Each ring uses four T-15 Torx socket cap screws for a secure clamp that won't shift under recoil, and a CZ-specific recoil pin ensures positive engagement with your receiver's dovetail geometry. Once torqued to spec and left alone, they stay put.
Warne has built a reputation for dependable scope rings and mounts across dozens of rifle platforms, and these CZ rings follow that tradition. They're the kind of accessory that works without drama—you mount your scope, dial it in, and forget about the rings themselves. That's exactly what you want from a scope mounting system.
| Ring Diameter | 1 inch |
| Ring Height | Medium |
| Dovetail Compatibility | CZ527 16mm |
| Fastener Type | T-15 Torx socket cap screws (qty. 4) |
| Finish | Matte |
| Recommended Torque | 25 in/lb |
Yes—these are sized for the CZ527 with its 16mm dovetail. They won't fit CZ 550 receivers, which use a 19mm dovetail. Verify your rifle's model before ordering.
No. These rings mount directly to your CZ527's receiver dovetail without a base. That's one fewer component and one fewer potential point of failure.
These are 1-inch rings, so they fit standard 1-inch diameter scopes.
Use 25 in/lb of torque on the T-15 Torx socket cap screws. This clamps the scope securely without over-tightening and damaging the optic tube.