Talley Browning X-Bolt Scope Mounts 34Mm High 20 Moa Short/Super Short BurnTalley Manufacturing$102.99
Loading...
Loading...
Loading...
Loading...
Talley Manufacturing
The Talley Browning X-Bolt mounts deliver a streamlined, rock-solid scope mounting solution for your X-Bolt rifle. Unlike traditional two-piece ring-and-base systems that risk misalignment or looseness over time, Talley's integrated one-piece design locks everything into a single rigid platform—no lapping required, ready to shoot out of the box. Built from aircraft-grade aluminum and CNC machined to tight tolerances, these 34mm high rings weigh less than steel alternatives while offering superior strength and durability.
The integrated 20 MOA elevation built into these rings is purpose-built for long-range hunting and precision shooting, giving your X-Bolt extended distance capability without relying on your scope's turrets alone. That extra angle of attack opens up flatter trajectories and more downrange adjustment room—essential if you're stretching shots beyond typical hunting ranges. Finished in bronze anodize, these mounts blend rugged utility with a finish that resists corrosion in the field.
Talley Manufacturing has spent over 40 years perfecting scope mount engineering, and it shows in the fit and finish here. The one-piece design eliminates the interface problems that plague budget rings, delivering the repeatability serious shooters demand. Whether you're dialing in at the range or hunting steep terrain, these mounts won't shift or creep—they're built to stay put, shoot straight, and last.
| Tube Diameter | 34mm |
| Height | High |
| MOA Built-in | 20 MOA |
| Rifle Compatibility | Browning X-Bolt (Short/Super Short) |
| Material | Aircraft-grade aluminum |
| Finish | Bronze anodize |
| Design | Integrated one-piece ring and base |
| Lapping Required | No |
Yes, these Talley mounts are engineered specifically for Browning X-Bolt rifles in short and super short action configurations. They integrate directly with your X-Bolt's receiver for a perfect fit without modification.
The 20 MOA of elevation is permanently angled into the ring design, giving your rifle an inherent upward bias. This extra angle extends your scope's downrange adjustment capability, letting you dial longer distances without maxing out your turrets—ideal for 500+ yard hunting and precision shooting.
No. These mounts are CNC machined to tight tolerances and arrive ready to use. Lapping is not required and is not recommended, as it may void the warranty.
One-piece designs like Talley's eliminate the interface between separate rings and bases, removing potential alignment issues and connection points that can loosen over time. The result is a more rigid platform, better repeatability, and longer-term reliability—all while using lighter materials than comparable steel systems.
Talley Manufacturing
The Talley Browning X-Bolt mounts deliver a streamlined, rock-solid scope mounting solution for your X-Bolt rifle. Unlike traditional two-piece ring-and-base systems that risk misalignment or looseness over time, Talley's integrated one-piece design locks everything into a single rigid platform—no lapping required, ready to shoot out of the box. Built from aircraft-grade aluminum and CNC machined to tight tolerances, these 34mm high rings weigh less than steel alternatives while offering superior strength and durability.
The integrated 20 MOA elevation built into these rings is purpose-built for long-range hunting and precision shooting, giving your X-Bolt extended distance capability without relying on your scope's turrets alone. That extra angle of attack opens up flatter trajectories and more downrange adjustment room—essential if you're stretching shots beyond typical hunting ranges. Finished in bronze anodize, these mounts blend rugged utility with a finish that resists corrosion in the field.
Talley Manufacturing has spent over 40 years perfecting scope mount engineering, and it shows in the fit and finish here. The one-piece design eliminates the interface problems that plague budget rings, delivering the repeatability serious shooters demand. Whether you're dialing in at the range or hunting steep terrain, these mounts won't shift or creep—they're built to stay put, shoot straight, and last.
| Tube Diameter | 34mm |
| Height | High |
| MOA Built-in | 20 MOA |
| Rifle Compatibility | Browning X-Bolt (Short/Super Short) |
| Material | Aircraft-grade aluminum |
| Finish | Bronze anodize |
| Design | Integrated one-piece ring and base |
| Lapping Required | No |
Yes, these Talley mounts are engineered specifically for Browning X-Bolt rifles in short and super short action configurations. They integrate directly with your X-Bolt's receiver for a perfect fit without modification.
The 20 MOA of elevation is permanently angled into the ring design, giving your rifle an inherent upward bias. This extra angle extends your scope's downrange adjustment capability, letting you dial longer distances without maxing out your turrets—ideal for 500+ yard hunting and precision shooting.
No. These mounts are CNC machined to tight tolerances and arrive ready to use. Lapping is not required and is not recommended, as it may void the warranty.
One-piece designs like Talley's eliminate the interface between separate rings and bases, removing potential alignment issues and connection points that can loosen over time. The result is a more rigid platform, better repeatability, and longer-term reliability—all while using lighter materials than comparable steel systems.