Talley Browning X-Bolt Scope Mounts 34Mm Med 20 Moa Short/Super Short SmokeTalley Manufacturing$102.99
Loading...
Loading...
Loading...
Loading...
Talley Manufacturing
The Talley Browning X-Bolt scope mounts bring one-piece simplicity and rock-solid reliability to your X-Bolt rifle. Unlike traditional two-piece ring-and-base systems that can develop alignment issues or loose connections over time, Talley's integrated design eliminates those failure points entirely. The result is a lighter, stronger platform that's ready to mount and zero without lapping—a real advantage when you're prepping a hunting rifle or competition gun.
Built from aircraft-grade aluminum and CNC machined to tight tolerances, these 34mm low-profile mounts incorporate a built-in 20 MOA cant. That forward tilt opens up your rifle's elevation adjustment window, letting you push your effective range further without running out of scope travel or resorting to extreme turret positions. Whether you're hunting steep country or shooting long-range, that extra MOA buys you flexibility.
Talley has spent over four decades earning a reputation for precision and durability. Every mount is American-made and finished in a Smoke (smoked bronze) anodize that's tough, attractive, and won't glint in bright conditions. These mounts pair perfectly with 34mm scope tubes on Browning X-Bolt rifles, fitting both short and super-short actions.
| Tube Diameter | 34mm |
| Height | Low |
| MOA Built-In | 20 MOA |
| Action Fit | Browning X-Bolt (short/super-short) |
| Material | Aircraft-grade aluminum |
| Finish | Smoke (smoked bronze) anodize |
| Design | Integrated one-piece ring and base |
Yes—these mounts are specifically designed for Browning X-Bolt rifles. They fit both short and super-short actions.
The 20 MOA tilt is machined into the mounts themselves, angling your scope forward by 20 minutes of angle. This gives your scope's elevation turret extra room to dial up for long-range shots without hitting the mechanical limit of the scope's adjustment range.
No. Talley's CNC manufacturing and tight tolerances mean these mounts are ready to use straight out of the box. Lapping is not required.
Traditional setups use separate rings clamped to a separate base, creating two interfaces where misalignment or loosening can occur over time. Talley's integrated design is one solid piece, eliminating those connection points and delivering greater strength and repeatability with less overall weight.
Talley Manufacturing
The Talley Browning X-Bolt scope mounts bring one-piece simplicity and rock-solid reliability to your X-Bolt rifle. Unlike traditional two-piece ring-and-base systems that can develop alignment issues or loose connections over time, Talley's integrated design eliminates those failure points entirely. The result is a lighter, stronger platform that's ready to mount and zero without lapping—a real advantage when you're prepping a hunting rifle or competition gun.
Built from aircraft-grade aluminum and CNC machined to tight tolerances, these 34mm low-profile mounts incorporate a built-in 20 MOA cant. That forward tilt opens up your rifle's elevation adjustment window, letting you push your effective range further without running out of scope travel or resorting to extreme turret positions. Whether you're hunting steep country or shooting long-range, that extra MOA buys you flexibility.
Talley has spent over four decades earning a reputation for precision and durability. Every mount is American-made and finished in a Smoke (smoked bronze) anodize that's tough, attractive, and won't glint in bright conditions. These mounts pair perfectly with 34mm scope tubes on Browning X-Bolt rifles, fitting both short and super-short actions.
| Tube Diameter | 34mm |
| Height | Low |
| MOA Built-In | 20 MOA |
| Action Fit | Browning X-Bolt (short/super-short) |
| Material | Aircraft-grade aluminum |
| Finish | Smoke (smoked bronze) anodize |
| Design | Integrated one-piece ring and base |
Yes—these mounts are specifically designed for Browning X-Bolt rifles. They fit both short and super-short actions.
The 20 MOA tilt is machined into the mounts themselves, angling your scope forward by 20 minutes of angle. This gives your scope's elevation turret extra room to dial up for long-range shots without hitting the mechanical limit of the scope's adjustment range.
No. Talley's CNC manufacturing and tight tolerances mean these mounts are ready to use straight out of the box. Lapping is not required.
Traditional setups use separate rings clamped to a separate base, creating two interfaces where misalignment or loosening can occur over time. Talley's integrated design is one solid piece, eliminating those connection points and delivering greater strength and repeatability with less overall weight.