Loading...
Loading...
Loading...
Loading...
Redding Reloading Equipment
The Redding 6.5mm CM Competition Bushing Neck Die Set is purpose-built for precision rifle reloaders who demand tight case neck control and repeatable results. This three-die set combines a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater—each engineered with the exacting tolerances and adjustability that serious handloaders expect from Redding's competition line. Whether you're loading match ammunition for competition shooting or hunting rounds where consistency matters, this set gives you the control to neck-size and seat bullets with the precision required for tight groups downrange.
The Competition Bushing Neck Die employs a fully supported sleeve that keeps your case centered and aligned before and during sizing. As the case moves upward, the resizing bushing self-centers on the neck while the decapping rod maintains perfect alignment—much like a firing pin in a precision chamber. The micrometer adjustment on the neck die lets you dial in exactly how much of the neck gets sized, giving you shot-to-shot consistency that generic dies simply can't match. The Body Die then handles full-length resizing of the case body and shoulder bump for reliable chambering, all without touching the neck you just carefully sized.
The Competition Bullet Seater rounds out the set with engineering that reflects Redding's attention to detail. Its floating seating stem system is manufactured to such tight tolerances that the stem actually floats within the bullet guide—a demonstration of precision that translates directly to uniform seating depth and bullet runout. Micrometer adjustment on the seater gives you the fine control to seat bullets exactly where you want them. Note that bushings and a shellholder are sold separately and will be needed to complete your setup.
| Brand | Redding |
| Product Type | Bushing Neck Die Set |
| Caliber | 6.5mm CM |
| Dies Included | Competition Bushing Neck Sizing Die, Body Die, Competition Bullet Seater |
| Features | Micrometer adjustments on neck die and seater |
| What's Not Included | Bushings and shellholder (sold separately) |
This set is chambered for 6.5mm CM.
The set includes a Competition Bushing Neck Sizing Die, a Body Die for full-length resizing, and a Competition Bullet Seater. All three dies feature micrometer adjustments for precise control.
Yes. Bushings and a shellholder are sold separately and are required to complete your reloading setup with this die set.
The Competition Bushing Neck Die fully supports and aligns your case before sizing begins. The resizing bushing self-centers on the case neck as it moves, and the micrometer adjustment lets you precisely control how much of the neck gets sized—much tighter control than a standard die offers.
Redding Reloading Equipment
The Redding 6.5mm CM Competition Bushing Neck Die Set is purpose-built for precision rifle reloaders who demand tight case neck control and repeatable results. This three-die set combines a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater—each engineered with the exacting tolerances and adjustability that serious handloaders expect from Redding's competition line. Whether you're loading match ammunition for competition shooting or hunting rounds where consistency matters, this set gives you the control to neck-size and seat bullets with the precision required for tight groups downrange.
The Competition Bushing Neck Die employs a fully supported sleeve that keeps your case centered and aligned before and during sizing. As the case moves upward, the resizing bushing self-centers on the neck while the decapping rod maintains perfect alignment—much like a firing pin in a precision chamber. The micrometer adjustment on the neck die lets you dial in exactly how much of the neck gets sized, giving you shot-to-shot consistency that generic dies simply can't match. The Body Die then handles full-length resizing of the case body and shoulder bump for reliable chambering, all without touching the neck you just carefully sized.
The Competition Bullet Seater rounds out the set with engineering that reflects Redding's attention to detail. Its floating seating stem system is manufactured to such tight tolerances that the stem actually floats within the bullet guide—a demonstration of precision that translates directly to uniform seating depth and bullet runout. Micrometer adjustment on the seater gives you the fine control to seat bullets exactly where you want them. Note that bushings and a shellholder are sold separately and will be needed to complete your setup.
| Brand | Redding |
| Product Type | Bushing Neck Die Set |
| Caliber | 6.5mm CM |
| Dies Included | Competition Bushing Neck Sizing Die, Body Die, Competition Bullet Seater |
| Features | Micrometer adjustments on neck die and seater |
| What's Not Included | Bushings and shellholder (sold separately) |
This set is chambered for 6.5mm CM.
The set includes a Competition Bushing Neck Sizing Die, a Body Die for full-length resizing, and a Competition Bullet Seater. All three dies feature micrometer adjustments for precise control.
Yes. Bushings and a shellholder are sold separately and are required to complete your reloading setup with this die set.
The Competition Bushing Neck Die fully supports and aligns your case before sizing begins. The resizing bushing self-centers on the case neck as it moves, and the micrometer adjustment lets you precisely control how much of the neck gets sized—much tighter control than a standard die offers.
