Loading...
Loading...
Loading...
Loading...
RCBS
RCBS
Cast your own pistol rounds with the RCBS Flat Nose Pistol Bullet Mould in .356" diameter, designed for reloaders who want control over every stage of ammunition production. This double cavity mould lets you produce two bullets per pour, speeding up the casting process without sacrificing consistency. Whether you're working up loads for competition, plinking, or hunting, having your own supply of cast bullets means lower costs and the flexibility to experiment with different loads tailored to your specific firearm.
Built from solid steel throughout, this mould features precision-machined cavities and a 3/16-inch solid steel sprue plate that handles the heat of repeated pours. Hardened steel alignment pins keep the cavity blocks perfectly indexed, ensuring every bullet drops out uniform and ready to size. The sprue plate stays secure thanks to tempered steel spring washers and screws—hardware that won't fatigue or loosen over hundreds of casting sessions.
If you're new to bullet casting, note that this mould is sold without handles; they're available separately, which lets you match your preferred handle style or size to your setup. The flat nose profile is popular for handgun loads where you want a bullet that seats predictably and feeds reliably through a magazine. This is the workhorse tool for handloaders serious about managing their own ammunition supply.
| Bullet Diameter | .356" |
| Weight | 147 Grains | 2 |
| Construction | Solid Steel |
| Sprue Plate | 3/16" Solid Steel |
| Handles Included | No (sold separately) |
Yes. This mould comes without handles; they are purchased as an optional accessory. This lets you choose a handle style and length that suits your hand and casting setup.
RCBS makes this flat nose pistol mould in multiple grain weights (150, 170, 180, 200, 300, and 400 grain), giving you options depending on the cartridge and performance you're after.
Yes. The solid steel construction, alignment pins, and precision machining are designed to withstand repeated heating and cooling cycles typical of sustained casting sessions. The two-cavity design increases production speed without compromising quality.
The flat nose design is popular in pistol and revolver loading, where it seats predictably in the case and feeds reliably through magazines and cylinders. It's well-suited for target shooting, practice, and hunting loads.
Cast your own pistol rounds with the RCBS Flat Nose Pistol Bullet Mould in .356" diameter, designed for reloaders who want control over every stage of ammunition production. This double cavity mould lets you produce two bullets per pour, speeding up the casting process without sacrificing consistency. Whether you're working up loads for competition, plinking, or hunting, having your own supply of cast bullets means lower costs and the flexibility to experiment with different loads tailored to your specific firearm.
Built from solid steel throughout, this mould features precision-machined cavities and a 3/16-inch solid steel sprue plate that handles the heat of repeated pours. Hardened steel alignment pins keep the cavity blocks perfectly indexed, ensuring every bullet drops out uniform and ready to size. The sprue plate stays secure thanks to tempered steel spring washers and screws—hardware that won't fatigue or loosen over hundreds of casting sessions.
If you're new to bullet casting, note that this mould is sold without handles; they're available separately, which lets you match your preferred handle style or size to your setup. The flat nose profile is popular for handgun loads where you want a bullet that seats predictably and feeds reliably through a magazine. This is the workhorse tool for handloaders serious about managing their own ammunition supply.
| Bullet Diameter | .356" |
| Weight | 147 Grains | 2 |
| Construction | Solid Steel |
| Sprue Plate | 3/16" Solid Steel |
| Handles Included | No (sold separately) |
Yes. This mould comes without handles; they are purchased as an optional accessory. This lets you choose a handle style and length that suits your hand and casting setup.
RCBS makes this flat nose pistol mould in multiple grain weights (150, 170, 180, 200, 300, and 400 grain), giving you options depending on the cartridge and performance you're after.
Yes. The solid steel construction, alignment pins, and precision machining are designed to withstand repeated heating and cooling cycles typical of sustained casting sessions. The two-cavity design increases production speed without compromising quality.
The flat nose design is popular in pistol and revolver loading, where it seats predictably in the case and feeds reliably through magazines and cylinders. It's well-suited for target shooting, practice, and hunting loads.
