PROOF Research .308 Stainless Steel Bolt-Action Barrel Blank, 28" M24, 1:9 TwistPete Rickard$487.50
Loading...
Loading...
Loading...
Loading...
Pete Rickard
The PROOF Research .308 SS bolt-action barrel is a precision stainless steel match-grade barrel built for hunters and shooters who demand accuracy at distance. This 27-inch M24-contour barrel is chambered in .308 Winchester with a 1:10 twist rate, ready for your gunsmith to thread and final-chamber to your exact specifications. PROOF Research barrels start with double stress-relieved 416R stainless steel—a pre-hardened chromium alloy engineered specifically for precision rifle barrels—and are manufactured in-house with the same meticulous standards that define the brand.
The 416R material was designed by engineers in collaboration with barrel makers to deliver the consistency, strength, and durability demanded by precision shooters. Its homogeneous microstructure ensures uniform hardness along the entire length, a critical factor for achieving the precise, consistent rifling that translates to tight groups downrange. The steel combines excellent machinability with enough tensile strength and toughness to handle standard .308 chamber pressures reliably.
Every PROOF barrel is drilled, contoured, rifled, and hand lapped to exacting tolerances, then individually inspected with a bore scope before it ships. The result is a precision barrel blank that rewards quality gunsmith work and ammunition development with genuine sub-MOA potential. Whether you're building a long-range hunting rifle, a competition gun, or a precision varmint setup, this barrel gives you the foundation professionals trust.
| Caliber | .308 Winchester |
| Barrel Length | 27 inches |
| Contour | M24 |
| Twist Rate | 1:10 |
| Material | 416R Stainless Steel (double stress-relieved) |
| Finish | Stainless |
| Condition | Ready for threading and chambering |
The barrel ships unthreaded and unchambered—ready for your gunsmith to complete final finishing. PROOF Research manufactures the barrel, rifleis it, hand laps it, and inspects the bore, but your gunsmith will handle the specific threading and chambering work.
This barrel features a 1:10 twist rate, which is a standard choice for .308 Winchester and suits typical hunting and match-grade projectiles across a wide range of weights.
416R was specifically engineered for precision rifle barrels. It machines cleanly, laps to a uniform finish for bore accuracy, achieves consistent hardness when heat-treated, and combines the tensile strength needed to handle .308 pressures with adequate toughness for reliable performance.
Yes. The 27-inch M24 contour and match-grade manufacturing make this barrel well-suited for long-range hunting applications where accuracy and consistency matter.
Pete Rickard
The PROOF Research .308 SS bolt-action barrel is a precision stainless steel match-grade barrel built for hunters and shooters who demand accuracy at distance. This 27-inch M24-contour barrel is chambered in .308 Winchester with a 1:10 twist rate, ready for your gunsmith to thread and final-chamber to your exact specifications. PROOF Research barrels start with double stress-relieved 416R stainless steel—a pre-hardened chromium alloy engineered specifically for precision rifle barrels—and are manufactured in-house with the same meticulous standards that define the brand.
The 416R material was designed by engineers in collaboration with barrel makers to deliver the consistency, strength, and durability demanded by precision shooters. Its homogeneous microstructure ensures uniform hardness along the entire length, a critical factor for achieving the precise, consistent rifling that translates to tight groups downrange. The steel combines excellent machinability with enough tensile strength and toughness to handle standard .308 chamber pressures reliably.
Every PROOF barrel is drilled, contoured, rifled, and hand lapped to exacting tolerances, then individually inspected with a bore scope before it ships. The result is a precision barrel blank that rewards quality gunsmith work and ammunition development with genuine sub-MOA potential. Whether you're building a long-range hunting rifle, a competition gun, or a precision varmint setup, this barrel gives you the foundation professionals trust.
| Caliber | .308 Winchester |
| Barrel Length | 27 inches |
| Contour | M24 |
| Twist Rate | 1:10 |
| Material | 416R Stainless Steel (double stress-relieved) |
| Finish | Stainless |
| Condition | Ready for threading and chambering |
The barrel ships unthreaded and unchambered—ready for your gunsmith to complete final finishing. PROOF Research manufactures the barrel, rifleis it, hand laps it, and inspects the bore, but your gunsmith will handle the specific threading and chambering work.
This barrel features a 1:10 twist rate, which is a standard choice for .308 Winchester and suits typical hunting and match-grade projectiles across a wide range of weights.
416R was specifically engineered for precision rifle barrels. It machines cleanly, laps to a uniform finish for bore accuracy, achieves consistent hardness when heat-treated, and combines the tensile strength needed to handle .308 pressures with adequate toughness for reliable performance.
Yes. The 27-inch M24 contour and match-grade manufacturing make this barrel well-suited for long-range hunting applications where accuracy and consistency matter.