Loading...
Loading...
Loading...
Loading...
Nighthawk Custom
The Nighthawk Custom 1911 Drop-In Trigger Unit delivers what 1911 shooters have long wanted: a genuine trigger upgrade without a trip to a gunsmith. This all-in-one assembly replaces your hammer, sear, disconnector, hammer strut, and sear spring with fully machined stainless steel components housed in a steel frame. Installation requires only your existing sear and hammer pins—no additional parts needed. If you've ever wanted a crisp, clean trigger break on your 1911 but balked at the cost and downtime of a full trigger job, this drop-in system changes the equation.
What makes the DTS genuinely different is its engineering: the traditional three-pronged sear spring is gone, replaced by springs built directly into the disconnector and sear assembly. This simplification isn't just convenient—it reduces potential failure points and makes installation straightforward enough for someone with basic gunsmithing skills to handle in about the time it takes a thorough pistol cleaning. A single-leg grip safety spring is included to replace your existing sear spring, completing the package.
The system is designed to fit most quality, in-spec 1911 and 2011 models. Trigger pull ranges from 3¾ to 4 pounds depending on your mainspring weight, giving you a predictable, controllable break whether you're shooting competition, carrying for defense, or running drills at the range. Plan for a 100-round break-in period before the trigger reaches its final characteristics. This is the kind of practical upgrade that actually improves your gun without requiring a gunsmith appointment.
| Brand | Nighthawk Custom |
| Product Type | Drop-In Trigger Unit |
| Compatibility | Most quality in-spec 1911 and 2011 models |
| Components Replaced | Hammer, sear, disconnector, hammer strut, sear spring |
| Material | Fully machined stainless steel internals, steel housing |
| Trigger Pull Weight | 3¾–4 lb (varies with mainspring weight) |
| Break-In Period | 100 rounds |
| Includes | Drop-in trigger assembly, single-leg grip safety spring |
The Nighthawk Custom Drop-In Trigger Unit is designed for most quality, in-spec 1911 and 2011 models. Your existing sear and hammer pins are retained and reused, so compatibility depends on your pistol meeting standard 1911 specifications. If you're unsure whether your 1911 is in-spec, we recommend verifying before purchase.
No. The system is engineered as a true drop-in upgrade that requires only minimal gunsmithing skills to install safely. The process is straightforward enough to complete during a routine pistol cleaning, though a proper safety check is essential before firing.
The trigger pull ranges from 3¾ to 4 pounds and will vary based on your pistol's mainspring weight. After a 100-round break-in period, the trigger will reach its final characteristics.
The Drop-In Trigger Unit replaces your hammer, sear, disconnector, hammer strut, and sear spring. You'll keep and reuse your existing sear pin and hammer pin. A single-leg grip safety spring is included to replace your current sear spring.
Nighthawk Custom
The Nighthawk Custom 1911 Drop-In Trigger Unit delivers what 1911 shooters have long wanted: a genuine trigger upgrade without a trip to a gunsmith. This all-in-one assembly replaces your hammer, sear, disconnector, hammer strut, and sear spring with fully machined stainless steel components housed in a steel frame. Installation requires only your existing sear and hammer pins—no additional parts needed. If you've ever wanted a crisp, clean trigger break on your 1911 but balked at the cost and downtime of a full trigger job, this drop-in system changes the equation.
What makes the DTS genuinely different is its engineering: the traditional three-pronged sear spring is gone, replaced by springs built directly into the disconnector and sear assembly. This simplification isn't just convenient—it reduces potential failure points and makes installation straightforward enough for someone with basic gunsmithing skills to handle in about the time it takes a thorough pistol cleaning. A single-leg grip safety spring is included to replace your existing sear spring, completing the package.
The system is designed to fit most quality, in-spec 1911 and 2011 models. Trigger pull ranges from 3¾ to 4 pounds depending on your mainspring weight, giving you a predictable, controllable break whether you're shooting competition, carrying for defense, or running drills at the range. Plan for a 100-round break-in period before the trigger reaches its final characteristics. This is the kind of practical upgrade that actually improves your gun without requiring a gunsmith appointment.
| Brand | Nighthawk Custom |
| Product Type | Drop-In Trigger Unit |
| Compatibility | Most quality in-spec 1911 and 2011 models |
| Components Replaced | Hammer, sear, disconnector, hammer strut, sear spring |
| Material | Fully machined stainless steel internals, steel housing |
| Trigger Pull Weight | 3¾–4 lb (varies with mainspring weight) |
| Break-In Period | 100 rounds |
| Includes | Drop-in trigger assembly, single-leg grip safety spring |
The Nighthawk Custom Drop-In Trigger Unit is designed for most quality, in-spec 1911 and 2011 models. Your existing sear and hammer pins are retained and reused, so compatibility depends on your pistol meeting standard 1911 specifications. If you're unsure whether your 1911 is in-spec, we recommend verifying before purchase.
No. The system is engineered as a true drop-in upgrade that requires only minimal gunsmithing skills to install safely. The process is straightforward enough to complete during a routine pistol cleaning, though a proper safety check is essential before firing.
The trigger pull ranges from 3¾ to 4 pounds and will vary based on your pistol's mainspring weight. After a 100-round break-in period, the trigger will reach its final characteristics.
The Drop-In Trigger Unit replaces your hammer, sear, disconnector, hammer strut, and sear spring. You'll keep and reuse your existing sear pin and hammer pin. A single-leg grip safety spring is included to replace your current sear spring.
