Magpul Pro 700 Lite SA OD Green Adjustable Stock with Aluminum Chassis for Remington 700 Short Action AmbidextrousMagpulOriginal price was $550.55. Current price is $569.95.
Loading...
Loading...
Loading...
Loading...
Magpul
The Magpul Pro 700 Chassis for Remington 700 short action is a precision rifle platform built for shooters who demand modularity, comfort, and ambidextrous functionality. If you're building or upgrading a bolt-action precision rifle around a Remington 700 action, this all-in-one chassis replaces the factory stock with a rigid, feature-rich system that brings modern ergonomics and adjustability to classic long-range and hunting setups.
Built on a full billet 6061-T6 aluminum skeleton and wrapped in durable Magpul polymer, the Pro 700 delivers a stiff platform that dampens noise and won't absorb moisture like wood. Every control is truly ambidextrous: swap the bolt-cutout plate and reversible cheek riser, and the entire chassis works equally well for lefties and righties. The reversible push-button hinge lets you fold the stock for transport or tight spaces—a genuine advantage for overlanders, truck gun setups, and competition shooters juggling multiple rifles.
Adjustability is where this chassis shines. Length of pull ranges from 13.25" to 15.125", and the grip itself adjusts fore and aft by .75" to dial in hand position. The cheek riser offers three fore/aft positions plus height adjustment to 1" with a secondary locking knob—no more gap between your face and comb. The butt pad tilts 5 degrees left or right and adjusts height from .90" to 1.33", so you can fine-tune your sight picture and shoulder pocket. The grip features a 5-degree forward edge and 7-degree aft sweep with an enlarged palm swell for control and comfort, even in a shooting glove.
An integrated AICS pattern polymer magazine comes included, optimized for PMAG 5 and PMAG 10 7.62 AC magazines and most other AICS short-action mags. The low-profile, melonite-treated steel magazine release is ambidextrous, and the large trigger guard accommodates factory and aftermarket curved or flat triggers. M-LOK slots up the sides let you mount a bipod, light, or other accessories. Cast steel QD sling swivel mounts with Melonite finish accept up to 1.5" push-button swivels. The chassis fits barrels up to MTU contour and ships in black, flat dark earth, or OD green.
| Chassis Type | Billet aluminum skeleton with polymer cladding |
| Aluminum Grade | 6061-T6 |
| Compatibility | Remington 700 short action |
| Length of Pull Range | 13.25" – 15.125" |
| Grip Fore/Aft Adjustment | .75" |
| Cheek Riser Adjustment | 3-position fore/aft (+.375", 0", −.375"); up to 1" height |
| Butt Pad Height Adjustment | .90" – 1.33" |
| Butt Pad Tilt | 5 degrees left or right |
| Grip Sweep | 5-degree forward, 7-degree aft |
| Magazine Type | Integrated AICS pattern polymer (included) |
| Compatible Magazines | PMAG 5 and PMAG 10 7.62 AC; most AICS short-action mags |
| QD Swivel Mounts | Cast steel with Melonite finish; fit up to 1.5" push-button swivels |
| Accessory Mounting | M-LOK slots |
| Barrel Contour Compatibility | Up to MTU |
| Stock Folding | Reversible push-button hinge |
| Ambidextrous | Yes (swappable bolt-cutout plate, reversible cheek riser, reversible hinge) |
| Magazine Release | Low-profile, melonite-treated steel, ambidextrous |
| Finish Options | Black, flat dark earth, OD green |
The Pro 700 Chassis is designed for Remington 700 short-action rifles and fits barrels up to MTU contour. Confirm your action is a short action before ordering. The chassis replaces the factory stock and requires your existing barreled action and trigger group.
Yes. The bolt-cutout plate is swappable, the cheek riser is reversible, and the stock hinge is reversible, making the entire chassis fully ambidextrous. All controls, including the magazine release and safety manipulations, function equally well for both left and right-handed shooters.
The Pro 700 Chassis includes an integrated AICS pattern polymer magazine. It is optimized for PMAG 5 and PMAG 10 7.62 AC magazines and is compatible with most other AICS pattern short-action magazines.
Yes. The Pro 700 features a reversible, durable push-button hinge that allows you to fold the stock for compact transport, storage, or in tight shooting positions.
Length of pull ranges from 13.25" to 15.125", and the grip adjusts .75" fore and aft. The cheek riser offers three fore/aft positions (±.375" and zero) plus up to 1" height adjustment using a secondary locking knob. The butt pad also adjusts from .90" to 1.33" in height and tilts 5 degrees left or right.
Magpul
The Magpul Pro 700 Chassis for Remington 700 short action is a precision rifle platform built for shooters who demand modularity, comfort, and ambidextrous functionality. If you're building or upgrading a bolt-action precision rifle around a Remington 700 action, this all-in-one chassis replaces the factory stock with a rigid, feature-rich system that brings modern ergonomics and adjustability to classic long-range and hunting setups.
Built on a full billet 6061-T6 aluminum skeleton and wrapped in durable Magpul polymer, the Pro 700 delivers a stiff platform that dampens noise and won't absorb moisture like wood. Every control is truly ambidextrous: swap the bolt-cutout plate and reversible cheek riser, and the entire chassis works equally well for lefties and righties. The reversible push-button hinge lets you fold the stock for transport or tight spaces—a genuine advantage for overlanders, truck gun setups, and competition shooters juggling multiple rifles.
Adjustability is where this chassis shines. Length of pull ranges from 13.25" to 15.125", and the grip itself adjusts fore and aft by .75" to dial in hand position. The cheek riser offers three fore/aft positions plus height adjustment to 1" with a secondary locking knob—no more gap between your face and comb. The butt pad tilts 5 degrees left or right and adjusts height from .90" to 1.33", so you can fine-tune your sight picture and shoulder pocket. The grip features a 5-degree forward edge and 7-degree aft sweep with an enlarged palm swell for control and comfort, even in a shooting glove.
An integrated AICS pattern polymer magazine comes included, optimized for PMAG 5 and PMAG 10 7.62 AC magazines and most other AICS short-action mags. The low-profile, melonite-treated steel magazine release is ambidextrous, and the large trigger guard accommodates factory and aftermarket curved or flat triggers. M-LOK slots up the sides let you mount a bipod, light, or other accessories. Cast steel QD sling swivel mounts with Melonite finish accept up to 1.5" push-button swivels. The chassis fits barrels up to MTU contour and ships in black, flat dark earth, or OD green.
| Chassis Type | Billet aluminum skeleton with polymer cladding |
| Aluminum Grade | 6061-T6 |
| Compatibility | Remington 700 short action |
| Length of Pull Range | 13.25" – 15.125" |
| Grip Fore/Aft Adjustment | .75" |
| Cheek Riser Adjustment | 3-position fore/aft (+.375", 0", −.375"); up to 1" height |
| Butt Pad Height Adjustment | .90" – 1.33" |
| Butt Pad Tilt | 5 degrees left or right |
| Grip Sweep | 5-degree forward, 7-degree aft |
| Magazine Type | Integrated AICS pattern polymer (included) |
| Compatible Magazines | PMAG 5 and PMAG 10 7.62 AC; most AICS short-action mags |
| QD Swivel Mounts | Cast steel with Melonite finish; fit up to 1.5" push-button swivels |
| Accessory Mounting | M-LOK slots |
| Barrel Contour Compatibility | Up to MTU |
| Stock Folding | Reversible push-button hinge |
| Ambidextrous | Yes (swappable bolt-cutout plate, reversible cheek riser, reversible hinge) |
| Magazine Release | Low-profile, melonite-treated steel, ambidextrous |
| Finish Options | Black, flat dark earth, OD green |
The Pro 700 Chassis is designed for Remington 700 short-action rifles and fits barrels up to MTU contour. Confirm your action is a short action before ordering. The chassis replaces the factory stock and requires your existing barreled action and trigger group.
Yes. The bolt-cutout plate is swappable, the cheek riser is reversible, and the stock hinge is reversible, making the entire chassis fully ambidextrous. All controls, including the magazine release and safety manipulations, function equally well for both left and right-handed shooters.
The Pro 700 Chassis includes an integrated AICS pattern polymer magazine. It is optimized for PMAG 5 and PMAG 10 7.62 AC magazines and is compatible with most other AICS pattern short-action magazines.
Yes. The Pro 700 features a reversible, durable push-button hinge that allows you to fold the stock for compact transport, storage, or in tight shooting positions.
Length of pull ranges from 13.25" to 15.125", and the grip adjusts .75" fore and aft. The cheek riser offers three fore/aft positions (±.375" and zero) plus up to 1" height adjustment using a secondary locking knob. The butt pad also adjusts from .90" to 1.33" in height and tilts 5 degrees left or right.
