Loading...
Loading...
Loading...
Loading...
Leupold
The Leupold BackCountry 2-piece scope rings for Savage 10/110 rifles deliver a lightweight, dependable mounting solution built for hunters and shooters who refuse to compromise on weight or strength. These rings accept any riflescope with a 1-inch maintube and mount directly to Savage 10/110 round receivers using both 8-40 and 6-48 scope ring screws, giving you the flexibility to work with various receiver configurations. Machined from 7075-T6 aluminum, they're engineered to be among Leupold's lightest and most rugged mounting solutions—ideal for backcountry hunters and long-range shooters who count ounces without sacrificing durability.
High ring height (1.1 inches) provides the clearance you need for larger objective lenses and enables efficient scope mounting that doesn't interfere with your rifle's action or bolt throw. The BackCountry design philosophy means you get a no-nonsense mounting system that performs consistently across a range of hunting and range conditions. At just 3.4 ounces, these rings won't weigh down your Savage rifle when you're hiking steep country or building a precision long-range setup.
Leupold's legacy of American-made optics reliability extends to their rings and mounts. Installation is straightforward when you follow the specified torque specs—22 in-lbs on the base screws and 28 in-lbs on the ring-top screws—ensuring a solid, repeatable zero without over-tightening aluminum components.
| Material | 7075-T6 Aluminum |
| Ring Diameter | 1 inch |
| Ring Height | 1.1 inches (High) |
| Weight | 3.4 oz |
| Base Screw Torque | 22 in-lbs |
| Ring-Top Screw Torque | 28 in-lbs |
| Included Screws | 8-40 and 6-48 |
| Compatible Receivers | Savage 10/110 round receivers |
| Cant Correction | No |
Yes. These two-piece rings mount directly to Savage 10/110 round receivers. They include both 8-40 and 6-48 screws to accommodate different receiver configurations.
These rings are designed for riflescopes with a 1-inch maintube. They will not fit 30mm or smaller tube diameters.
The complete set weighs 3.4 ounces, making them one of Leupold's lightest mounting solutions for Savage rifles. This minimal weight is ideal for backcountry hunters and lightweight rifle builds.
These are high-profile rings with a ring height of 1.1 inches. This height provides clearance for larger objective lenses and allows for efficient scope positioning without interference with typical bolt-action mechanics.
Leupold
The Leupold BackCountry 2-piece scope rings for Savage 10/110 rifles deliver a lightweight, dependable mounting solution built for hunters and shooters who refuse to compromise on weight or strength. These rings accept any riflescope with a 1-inch maintube and mount directly to Savage 10/110 round receivers using both 8-40 and 6-48 scope ring screws, giving you the flexibility to work with various receiver configurations. Machined from 7075-T6 aluminum, they're engineered to be among Leupold's lightest and most rugged mounting solutions—ideal for backcountry hunters and long-range shooters who count ounces without sacrificing durability.
High ring height (1.1 inches) provides the clearance you need for larger objective lenses and enables efficient scope mounting that doesn't interfere with your rifle's action or bolt throw. The BackCountry design philosophy means you get a no-nonsense mounting system that performs consistently across a range of hunting and range conditions. At just 3.4 ounces, these rings won't weigh down your Savage rifle when you're hiking steep country or building a precision long-range setup.
Leupold's legacy of American-made optics reliability extends to their rings and mounts. Installation is straightforward when you follow the specified torque specs—22 in-lbs on the base screws and 28 in-lbs on the ring-top screws—ensuring a solid, repeatable zero without over-tightening aluminum components.
| Material | 7075-T6 Aluminum |
| Ring Diameter | 1 inch |
| Ring Height | 1.1 inches (High) |
| Weight | 3.4 oz |
| Base Screw Torque | 22 in-lbs |
| Ring-Top Screw Torque | 28 in-lbs |
| Included Screws | 8-40 and 6-48 |
| Compatible Receivers | Savage 10/110 round receivers |
| Cant Correction | No |
Yes. These two-piece rings mount directly to Savage 10/110 round receivers. They include both 8-40 and 6-48 screws to accommodate different receiver configurations.
These rings are designed for riflescopes with a 1-inch maintube. They will not fit 30mm or smaller tube diameters.
The complete set weighs 3.4 ounces, making them one of Leupold's lightest mounting solutions for Savage rifles. This minimal weight is ideal for backcountry hunters and lightweight rifle builds.
These are high-profile rings with a ring height of 1.1 inches. This height provides clearance for larger objective lenses and allows for efficient scope positioning without interference with typical bolt-action mechanics.
