Loading...
Loading...
Loading...
Loading...
Leupold
The Leupold BackCountry two-piece scope rings for Savage 10/110 receivers are engineered for hunters and precision shooters who demand lightweight, dependable optics mounting without compromise. Built from 7075-T6 aluminum, these medium-height 1-inch rings deliver the ruggedness you need for backcountry hunts and range sessions while keeping your rifle's overall weight down—critical when every ounce counts on a long stalk. They're purpose-built to fit Savage 10 and 110 round receivers directly and work with any riflescope featuring a 1-inch maintube.
Setup is straightforward: these two-piece rings come with both 8-40 and 6-48 screws, so you're covered regardless of your receiver's tapping configuration. The medium ring height suits most standard scope mounting positions on Savage platforms, hitting the sweet spot between bore clearance and cheek weld. Leupold's attention to torque specs—22 in-lbs for base and keeper clamp, 28 in-lbs for ring tops—makes for consistent, reliable zero-holding performance when you dial things in properly.
At 3.2 ounces, these rings won't burden your load, and the 7075-T6 aluminum construction means they'll stand up to hard use in the field and at the bench. If you're building or upgrading a Savage 10/110 and want proven Leupold engineering in a lightweight package, this is the no-nonsense choice.
| Material | 7075-T6 Aluminum |
| Ring Diameter | 1 inch |
| Ring Height | Medium (.97 inches) |
| Configuration | Two-piece |
| Weight | 3.2 oz |
| Base/Receiver Screw Torque | 22 in-lbs |
| Keeper Clamp Torque | 22 in-lbs |
| Ring Top Screw Torque | 28 in-lbs |
| Included Screws | 8-40 and 6-48 |
| Cant | No |
Yes. These two-piece BackCountry rings mount directly to Savage 10 and 110 round receivers and come with both 8-40 and 6-48 screws to match your receiver's tapping.
These rings are designed for riflescopes with a 1-inch maintube.
Leupold specs are 22 in-lbs for base and keeper clamp fasteners and 28 in-lbs for ring top screws. Follow these to ensure your scope stays zeroed.
Yes. At 3.2 ounces and built from aircraft-grade 7075-T6 aluminum, these BackCountry rings are engineered for hunters and shooters who prioritize minimal weight without sacrificing durability.
Leupold
The Leupold BackCountry two-piece scope rings for Savage 10/110 receivers are engineered for hunters and precision shooters who demand lightweight, dependable optics mounting without compromise. Built from 7075-T6 aluminum, these medium-height 1-inch rings deliver the ruggedness you need for backcountry hunts and range sessions while keeping your rifle's overall weight down—critical when every ounce counts on a long stalk. They're purpose-built to fit Savage 10 and 110 round receivers directly and work with any riflescope featuring a 1-inch maintube.
Setup is straightforward: these two-piece rings come with both 8-40 and 6-48 screws, so you're covered regardless of your receiver's tapping configuration. The medium ring height suits most standard scope mounting positions on Savage platforms, hitting the sweet spot between bore clearance and cheek weld. Leupold's attention to torque specs—22 in-lbs for base and keeper clamp, 28 in-lbs for ring tops—makes for consistent, reliable zero-holding performance when you dial things in properly.
At 3.2 ounces, these rings won't burden your load, and the 7075-T6 aluminum construction means they'll stand up to hard use in the field and at the bench. If you're building or upgrading a Savage 10/110 and want proven Leupold engineering in a lightweight package, this is the no-nonsense choice.
| Material | 7075-T6 Aluminum |
| Ring Diameter | 1 inch |
| Ring Height | Medium (.97 inches) |
| Configuration | Two-piece |
| Weight | 3.2 oz |
| Base/Receiver Screw Torque | 22 in-lbs |
| Keeper Clamp Torque | 22 in-lbs |
| Ring Top Screw Torque | 28 in-lbs |
| Included Screws | 8-40 and 6-48 |
| Cant | No |
Yes. These two-piece BackCountry rings mount directly to Savage 10 and 110 round receivers and come with both 8-40 and 6-48 screws to match your receiver's tapping.
These rings are designed for riflescopes with a 1-inch maintube.
Leupold specs are 22 in-lbs for base and keeper clamp fasteners and 28 in-lbs for ring top screws. Follow these to ensure your scope stays zeroed.
Yes. At 3.2 ounces and built from aircraft-grade 7075-T6 aluminum, these BackCountry rings are engineered for hunters and shooters who prioritize minimal weight without sacrificing durability.
