Kgm Suppressors A-Dta-S-1 Direct Thread Adapter 1/2"X28 Steel NitrideKgm Suppressors$85.00
Loading...
Loading...
Loading...
Loading...
Kgm Suppressors
The KGM Suppressors A-Dta-T-1 is a direct thread adapter designed to connect suppressors with KGM's proprietary HUB mount system to barrels threaded at 1/2x28. If you run a KGM suppressor and want to swap it between rifles with different muzzle threads, or if you're building a 1/2x28 barrel setup with a HUB-compatible can, this titanium nitride adapter solves the compatibility puzzle without requiring permanent barrel modifications.
KGM Suppressors are built for shooters who take sound signature seriously—whether you're hunting in close quarters, running a suppressed rifle at the range, or prioritizing hearing protection in the field. The adapter itself is a straightforward mechanical piece: it threads onto your 1/2x28 barrel and accepts the HUB system on the suppressor end. Titanium nitride coating improves durability and corrosion resistance, important when you're threading and unthreading adapters in the field.
This adapter is compatible with KGM's R6, R65, R65K, R30, and R30K suppressors, plus any other suppressor featuring the HUB mount interface. It's a practical accessory if you own multiple rifles with 1/2x28 threads or if you're adding a 1/2x28 barrel to an existing KGM suppressor setup. Installation is straightforward—no gunsmithing required—and it allows you to keep your suppressor mounted to your rifle or quickly swap it between guns without tools.
| Muzzle Thread | 1/2x28 |
| Mount Type | Direct thread to HUB adapter |
| Material | Titanium nitride |
| Manufacturer | KGM Suppressors |
The A-Dta-T-1 works with KGM suppressors featuring the HUB mount system, including the R6, R65, R65K, R30, and R30K models, as well as any other KGM suppressor with HUB compatibility.
No, this adapter is designed specifically for barrels threaded at 1/2x28. If your barrel has a different thread pitch, you will need the appropriate KGM adapter for that caliber.
No, the adapter threads on and off by hand, making it convenient for quick suppressor swaps or securing it to your barrel in the field without additional tools.
Titanium nitride is a hard, corrosion-resistant surface treatment that protects the adapter from wear and rust, especially important if you regularly thread and unthread it or use it in wet conditions.
Kgm Suppressors
The KGM Suppressors A-Dta-T-1 is a direct thread adapter designed to connect suppressors with KGM's proprietary HUB mount system to barrels threaded at 1/2x28. If you run a KGM suppressor and want to swap it between rifles with different muzzle threads, or if you're building a 1/2x28 barrel setup with a HUB-compatible can, this titanium nitride adapter solves the compatibility puzzle without requiring permanent barrel modifications.
KGM Suppressors are built for shooters who take sound signature seriously—whether you're hunting in close quarters, running a suppressed rifle at the range, or prioritizing hearing protection in the field. The adapter itself is a straightforward mechanical piece: it threads onto your 1/2x28 barrel and accepts the HUB system on the suppressor end. Titanium nitride coating improves durability and corrosion resistance, important when you're threading and unthreading adapters in the field.
This adapter is compatible with KGM's R6, R65, R65K, R30, and R30K suppressors, plus any other suppressor featuring the HUB mount interface. It's a practical accessory if you own multiple rifles with 1/2x28 threads or if you're adding a 1/2x28 barrel to an existing KGM suppressor setup. Installation is straightforward—no gunsmithing required—and it allows you to keep your suppressor mounted to your rifle or quickly swap it between guns without tools.
| Muzzle Thread | 1/2x28 |
| Mount Type | Direct thread to HUB adapter |
| Material | Titanium nitride |
| Manufacturer | KGM Suppressors |
The A-Dta-T-1 works with KGM suppressors featuring the HUB mount system, including the R6, R65, R65K, R30, and R30K models, as well as any other KGM suppressor with HUB compatibility.
No, this adapter is designed specifically for barrels threaded at 1/2x28. If your barrel has a different thread pitch, you will need the appropriate KGM adapter for that caliber.
No, the adapter threads on and off by hand, making it convenient for quick suppressor swaps or securing it to your barrel in the field without additional tools.
Titanium nitride is a hard, corrosion-resistant surface treatment that protects the adapter from wear and rust, especially important if you regularly thread and unthread it or use it in wet conditions.