Kgm Suppressors A-Dta-T-1 Direct Thread Adapter 1/2"X28 Titanium NitrideKgm Suppressors$115.00
Loading...
Loading...
Loading...
Loading...
Kgm Suppressors
The KGM Suppressors A-Dta-S-1 is a direct thread adapter designed to connect your suppressor to rifles with 1/2"×28 threaded muzzles. If you run KGM suppressors on multiple rifles or need a quick way to attach and detach your can without removing the muzzle brake, this steel nitride adapter gives you that flexibility. It's engineered to work with KGM's HUB-compatible suppressor lineup—including the R6, R65, R65K, R30, and R30K models—so you're not locked into a single host rifle.
Built from steel with a nitride finish, the adapter is made to handle the heat and gas cycling of live fire without degradation. The nitride coating resists corrosion and wear, which matters if you're moving this adapter between guns at the range or in the field. At its core, this is a straightforward muzzle interface: it threads onto your rifle's barrel and accepts your KGM suppressor's mounting system, letting you swap cans or move one suppressor between guns without a gunsmith visit.
Whether you're a dedicated suppressed shooter running multiple platforms or testing a single suppressor across different rifles, this adapter keeps your setup modular and cost-effective. It's a no-frills piece of engineering that does one job well—connect your suppressor to your gun.
| Thread Pattern | 1/2"×28 |
| Material | Steel |
| Finish | Nitride |
| Compatibility | KGM HUB-compatible suppressors (R6, R65, R65K, R30, R30K, and others) |
The A-Dta-S-1 is compatible with any KGM suppressor featuring their HUB mounting system, including the R6, R65, R65K, R30, and R30K models.
Yes. As long as your rifles have 1/2"×28 threaded muzzles and you have an adapter for each host rifle, you can move a single KGM suppressor between guns by swapping adapters.
The adapter threads onto your muzzle and accepts your KGM suppressor's HUB connection, so it functions as a permanent threaded muzzle interface. If you need to remove it, you would unscrew it from the barrel.
Kgm Suppressors
The KGM Suppressors A-Dta-S-1 is a direct thread adapter designed to connect your suppressor to rifles with 1/2"×28 threaded muzzles. If you run KGM suppressors on multiple rifles or need a quick way to attach and detach your can without removing the muzzle brake, this steel nitride adapter gives you that flexibility. It's engineered to work with KGM's HUB-compatible suppressor lineup—including the R6, R65, R65K, R30, and R30K models—so you're not locked into a single host rifle.
Built from steel with a nitride finish, the adapter is made to handle the heat and gas cycling of live fire without degradation. The nitride coating resists corrosion and wear, which matters if you're moving this adapter between guns at the range or in the field. At its core, this is a straightforward muzzle interface: it threads onto your rifle's barrel and accepts your KGM suppressor's mounting system, letting you swap cans or move one suppressor between guns without a gunsmith visit.
Whether you're a dedicated suppressed shooter running multiple platforms or testing a single suppressor across different rifles, this adapter keeps your setup modular and cost-effective. It's a no-frills piece of engineering that does one job well—connect your suppressor to your gun.
| Thread Pattern | 1/2"×28 |
| Material | Steel |
| Finish | Nitride |
| Compatibility | KGM HUB-compatible suppressors (R6, R65, R65K, R30, R30K, and others) |
The A-Dta-S-1 is compatible with any KGM suppressor featuring their HUB mounting system, including the R6, R65, R65K, R30, and R30K models.
Yes. As long as your rifles have 1/2"×28 threaded muzzles and you have an adapter for each host rifle, you can move a single KGM suppressor between guns by swapping adapters.
The adapter threads onto your muzzle and accepts your KGM suppressor's HUB connection, so it functions as a permanent threaded muzzle interface. If you need to remove it, you would unscrew it from the barrel.