Forward Controls Design Ar-10 Flash Suppressor Mount 5/8''X24 ThreadForward Controls Design$96.19
Loading...
Loading...
Loading...
Loading...
Forward Controls Design
The Forward Controls Design Xeno Flash Suppressor is a muzzle device built to work seamlessly with Dead Air suppressors equipped with Xeno adapters. Threaded for 5/8"x24, this flash hider combines flash reduction with effective muzzle control—delivering a no-compromise option for shooters running suppressors on precision rifles, hunting guns, or duty carbines. The closed-bottom design suppresses dust signature when shooting from prone, keeping your position concealed in the field or on the range.
What sets the Xeno apart is how it mates to your suppressor. The flash hider and Xeno adapter use left-handed threads, a smart detail that prevents the adapter from unthreading when you remove the can. You'll also be able to verify your mount is still tight each time you install it on your gun—a quick confidence check before you shoot. The design comes from Forward Controls' refined approach to compensator porting: side ports at 3 o'clock and 9 o'clock that deliver 15 to 20% better recoil management than standard A2 compensators, without adding concussion or noise when you're not suppressed.
At 2.157" overall length, the Xeno adds approximately 1.657" to your barrel (assuming 0.5" of threads). A 14.5" barrel will measure over 16.1" once installed. The muzzle device includes a pin hole drilled on the bottom, allowing you to pin it permanently to your barrel for a rock-solid mount that won't shift. If you're building an SBR or running a short-barreled rifle, the pinned configuration is a trusted way to keep everything locked in place without relying on the suppressor to hold zero.
The Xeno works with Dead Air's Nomad series, Nomad-Ti series, Primal, Wolfman with Xeno P-Series adapter, and Sierra-5 suppressors—provided you have the correct Xeno adapter for your silencer. Verify your specific Dead Air model before ordering to ensure compatibility.
| Caliber/Compatibility | 5/8"x24 thread |
| Overall Length | 2.157" |
| Barrel Extension (at 0.5" threads) | 1.657" |
| Mount Type | Xeno adapter (left-handed threads) |
| Pin Hole | Yes (bottom) |
| Compatible Suppressors | Dead Air Nomad, Nomad-Ti, Primal, Wolfman (Xeno P-Series), Sierra-5 |
The Xeno Flash Suppressor works with Dead Air Nomad, Nomad-Ti, Primal, Wolfman (with Xeno P-Series adapter), and Sierra-5 models. You'll need the correct Xeno adapter for your specific suppressor. Verify your silencer model before ordering.
Yes. The Xeno includes a pin hole drilled on the bottom, allowing you to pin it permanently to your barrel for a fixed, non-rotating mount. This is a solid choice for SBRs and short-barreled rifles where maximum stability matters.
The flash hider is 2.157" long overall. Assuming 0.5" of threads cut into your barrel for the muzzle device, it will add approximately 1.657" to your total barrel length. A 14.5" barrel will measure over 16.1" once installed.
No. The flash hider and Xeno adapter use left-handed threads, which prevents the adapter from unthreading when you take the suppressor off. This design also lets you quickly verify that your mount is still tight each time you install the can on your gun.
Forward Controls Design
The Forward Controls Design Xeno Flash Suppressor is a muzzle device built to work seamlessly with Dead Air suppressors equipped with Xeno adapters. Threaded for 5/8"x24, this flash hider combines flash reduction with effective muzzle control—delivering a no-compromise option for shooters running suppressors on precision rifles, hunting guns, or duty carbines. The closed-bottom design suppresses dust signature when shooting from prone, keeping your position concealed in the field or on the range.
What sets the Xeno apart is how it mates to your suppressor. The flash hider and Xeno adapter use left-handed threads, a smart detail that prevents the adapter from unthreading when you remove the can. You'll also be able to verify your mount is still tight each time you install it on your gun—a quick confidence check before you shoot. The design comes from Forward Controls' refined approach to compensator porting: side ports at 3 o'clock and 9 o'clock that deliver 15 to 20% better recoil management than standard A2 compensators, without adding concussion or noise when you're not suppressed.
At 2.157" overall length, the Xeno adds approximately 1.657" to your barrel (assuming 0.5" of threads). A 14.5" barrel will measure over 16.1" once installed. The muzzle device includes a pin hole drilled on the bottom, allowing you to pin it permanently to your barrel for a rock-solid mount that won't shift. If you're building an SBR or running a short-barreled rifle, the pinned configuration is a trusted way to keep everything locked in place without relying on the suppressor to hold zero.
The Xeno works with Dead Air's Nomad series, Nomad-Ti series, Primal, Wolfman with Xeno P-Series adapter, and Sierra-5 suppressors—provided you have the correct Xeno adapter for your silencer. Verify your specific Dead Air model before ordering to ensure compatibility.
| Caliber/Compatibility | 5/8"x24 thread |
| Overall Length | 2.157" |
| Barrel Extension (at 0.5" threads) | 1.657" |
| Mount Type | Xeno adapter (left-handed threads) |
| Pin Hole | Yes (bottom) |
| Compatible Suppressors | Dead Air Nomad, Nomad-Ti, Primal, Wolfman (Xeno P-Series), Sierra-5 |
The Xeno Flash Suppressor works with Dead Air Nomad, Nomad-Ti, Primal, Wolfman (with Xeno P-Series adapter), and Sierra-5 models. You'll need the correct Xeno adapter for your specific suppressor. Verify your silencer model before ordering.
Yes. The Xeno includes a pin hole drilled on the bottom, allowing you to pin it permanently to your barrel for a fixed, non-rotating mount. This is a solid choice for SBRs and short-barreled rifles where maximum stability matters.
The flash hider is 2.157" long overall. Assuming 0.5" of threads cut into your barrel for the muzzle device, it will add approximately 1.657" to your total barrel length. A 14.5" barrel will measure over 16.1" once installed.
No. The flash hider and Xeno adapter use left-handed threads, which prevents the adapter from unthreading when you take the suppressor off. This design also lets you quickly verify that your mount is still tight each time you install the can on your gun.