Forward Controls Design Xeno Flash Suppressor 1/2''X28 ThreadForward Controls Design$95.00
Loading...
Loading...
Loading...
Loading...
Forward Controls Design
The Forward Controls Design AR-15 flash suppressor mount with 1/2"x28 internal threads gives you a compact, closed-bottom muzzle device engineered to control both recoil and muzzle signature without the excessive flash and concussion of traditional compensators. Built on proven 6315 platform design and developed in collaboration with Revival Defense, this 1.725"-long suppressor mount threads directly onto standard AR-15 barrels and accepts external suppressors with 0.900"x24 threads—including Dead Air Keymo and Xeno systems with appropriate adapters like Rearden's Atlas.
The design philosophy here is practical: smaller ports at 3 and 9 o'clock force more gas upward through three top-facing ports, delivering roughly 15–20% better compensator performance compared to traditional A2-style flash hiders while keeping muzzle flash, concussion, and noise significantly lower than open-bottom compensators. It's shorter and more efficient than a spec A2, with 0.675" of usable port length versus the A2's 0.79", making it an ideal choice for mid-length uppers where you want both flash control and recoil management without the blast and concussion signature.
Important: This is a closed-bottom design requiring precise timing—the center port must face straight up (12 o'clock) for optimal performance. That's a straightforward installation step on any AR-15, but it matters. If you're running short barrels (10.5" and under) where flash signature gets dramatic, or you want to suppress without the compensator noise, this is a smart bridge between a traditional flash hider and a full comp.
| Internal Thread | 1/2"x28 |
| External Thread | 0.900"x24 |
| Overall Length | 1.725" |
| Weight | 2.08 oz |
| Wrench Flats | 3/4" |
| Port Configuration | Closed bottom with top-facing ports |
Yes, if your barrel has a 1/2"x28 muzzle thread. This is the standard threading on most modern AR-15 barrels in 5.56 NATO and similar calibers. It will not fit barrels with other thread pitches like 5/8"x24.
The external 0.900"x24 threads accept any suppressor or adapter with matching threads. This includes Dead Air Keymo and Xeno suppressors with appropriate adapters, and systems like Rearden's Atlas that use 0.900"x24 compatibility. Check your suppressor documentation for thread specifications.
Flash suppression is similar to a spec A2 flash hider. Performance depends on barrel length and ammunition. Short barrels (10.5") can still produce occasional flash, especially with standard rounds like Winchester M193. Flash signature will be much better controlled than an open-port compensator.
Yes—the center port must be precisely timed to face straight up at 12 o'clock for optimal performance. This is a straightforward alignment step during installation but is essential for the design to function as intended.
Forward Controls Design
The Forward Controls Design AR-15 flash suppressor mount with 1/2"x28 internal threads gives you a compact, closed-bottom muzzle device engineered to control both recoil and muzzle signature without the excessive flash and concussion of traditional compensators. Built on proven 6315 platform design and developed in collaboration with Revival Defense, this 1.725"-long suppressor mount threads directly onto standard AR-15 barrels and accepts external suppressors with 0.900"x24 threads—including Dead Air Keymo and Xeno systems with appropriate adapters like Rearden's Atlas.
The design philosophy here is practical: smaller ports at 3 and 9 o'clock force more gas upward through three top-facing ports, delivering roughly 15–20% better compensator performance compared to traditional A2-style flash hiders while keeping muzzle flash, concussion, and noise significantly lower than open-bottom compensators. It's shorter and more efficient than a spec A2, with 0.675" of usable port length versus the A2's 0.79", making it an ideal choice for mid-length uppers where you want both flash control and recoil management without the blast and concussion signature.
Important: This is a closed-bottom design requiring precise timing—the center port must face straight up (12 o'clock) for optimal performance. That's a straightforward installation step on any AR-15, but it matters. If you're running short barrels (10.5" and under) where flash signature gets dramatic, or you want to suppress without the compensator noise, this is a smart bridge between a traditional flash hider and a full comp.
| Internal Thread | 1/2"x28 |
| External Thread | 0.900"x24 |
| Overall Length | 1.725" |
| Weight | 2.08 oz |
| Wrench Flats | 3/4" |
| Port Configuration | Closed bottom with top-facing ports |
Yes, if your barrel has a 1/2"x28 muzzle thread. This is the standard threading on most modern AR-15 barrels in 5.56 NATO and similar calibers. It will not fit barrels with other thread pitches like 5/8"x24.
The external 0.900"x24 threads accept any suppressor or adapter with matching threads. This includes Dead Air Keymo and Xeno suppressors with appropriate adapters, and systems like Rearden's Atlas that use 0.900"x24 compatibility. Check your suppressor documentation for thread specifications.
Flash suppression is similar to a spec A2 flash hider. Performance depends on barrel length and ammunition. Short barrels (10.5") can still produce occasional flash, especially with standard rounds like Winchester M193. Flash signature will be much better controlled than an open-port compensator.
Yes—the center port must be precisely timed to face straight up at 12 o'clock for optimal performance. This is a straightforward alignment step during installation but is essential for the design to function as intended.