Loading...
Loading...
Loading...
Loading...
Eylar
The Eylar 44" hard rifle case with RAGAR foam insert is a rugged, travel-ready storage solution built for hunters, shooters, and transport. Whether you're heading to the range, a hunting trip, or moving rifles across state lines, this case combines waterproof protection with a modular foam system that adapts to your firearms and optics setup.
The standout feature here is the RAGAR reconfigurable foam system. Rather than a molded cavity locked into one configuration, individual foam pieces can be removed, rearranged, or repositioned to cradle your rifle's exact profile. Swapped out your scope or added a light? Pull apart the foam layers and rebuild them around your new setup. This flexibility means the case works for multiple firearms without compromise—a genuine advantage over traditional cut-foam cases that become obsolete once your gear changes.
Protection is serious. The case is sealed with a rubber gasket and meets IP67 waterproof standards, surviving full submersion to one meter. Inside, you get three layers of foam: the reconfigurable RAGAR pad on top, a solid foam core for structural support, and egg-crate padding for secondary cushioning. The hard exterior handles rough handling, and the pressure equalization valve prevents seal damage during altitude or temperature shifts. Two padlock-compatible fittings secure the case and meet TSA carry-on requirements, so you can safely store it locked at home or in a vehicle.
At 20.5 lbs, it's substantial but not excessive for a 44-inch case. The roller design makes movement easier, especially through airports or long distances. If you need a case that grows with your rifle collection and keeps your firearms protected in transit, this one delivers.
| External Dimensions | 44.37" L × 16" W × 6.12" H |
| Internal Dimensions | 42" L × 13.5" W × 5.25" H |
| Weight | 20.5 lbs |
| Waterproof Rating | IP67 (1 meter submersion) |
| Foam Configuration | RAGAR reconfigurable + solid layer + egg-crate padding |
| Locking | Two padlock-adaptable fittings |
| Valve | Pressure equalization |
Yes. The RAGAR foam system is designed to be reconfigured and reused. Individual foam pieces can be removed and rearranged to fit the unique contours and accessories of any rifle. If you change scopes, add rails, or swap firearms, simply pull apart and rebuild the foam cavity around your new setup.
The case meets IP67 waterproof standards and features a rubber gasket seal, so it can survive full submersion to one meter. It also includes a pressure equalization valve to prevent seal damage during altitude or temperature changes. The two padlock-compatible fittings meet TSA requirements and allow you to secure the case for compliant air and vehicle transport.
The case includes three foam layers: one RAGAR reconfigurable foam pad (the modular layer), one solid foam layer for core support, and one egg-crate padding layer for additional cushioning.
The internal dimensions are 42" long, 13.5" wide, and 5.25" tall. Most modern rifle configurations should fit within these bounds, and the reconfigurable foam system allows you to optimize the cavity for your specific firearm and accessories.
Eylar
The Eylar 44" hard rifle case with RAGAR foam insert is a rugged, travel-ready storage solution built for hunters, shooters, and transport. Whether you're heading to the range, a hunting trip, or moving rifles across state lines, this case combines waterproof protection with a modular foam system that adapts to your firearms and optics setup.
The standout feature here is the RAGAR reconfigurable foam system. Rather than a molded cavity locked into one configuration, individual foam pieces can be removed, rearranged, or repositioned to cradle your rifle's exact profile. Swapped out your scope or added a light? Pull apart the foam layers and rebuild them around your new setup. This flexibility means the case works for multiple firearms without compromise—a genuine advantage over traditional cut-foam cases that become obsolete once your gear changes.
Protection is serious. The case is sealed with a rubber gasket and meets IP67 waterproof standards, surviving full submersion to one meter. Inside, you get three layers of foam: the reconfigurable RAGAR pad on top, a solid foam core for structural support, and egg-crate padding for secondary cushioning. The hard exterior handles rough handling, and the pressure equalization valve prevents seal damage during altitude or temperature shifts. Two padlock-compatible fittings secure the case and meet TSA carry-on requirements, so you can safely store it locked at home or in a vehicle.
At 20.5 lbs, it's substantial but not excessive for a 44-inch case. The roller design makes movement easier, especially through airports or long distances. If you need a case that grows with your rifle collection and keeps your firearms protected in transit, this one delivers.
| External Dimensions | 44.37" L × 16" W × 6.12" H |
| Internal Dimensions | 42" L × 13.5" W × 5.25" H |
| Weight | 20.5 lbs |
| Waterproof Rating | IP67 (1 meter submersion) |
| Foam Configuration | RAGAR reconfigurable + solid layer + egg-crate padding |
| Locking | Two padlock-adaptable fittings |
| Valve | Pressure equalization |
Yes. The RAGAR foam system is designed to be reconfigured and reused. Individual foam pieces can be removed and rearranged to fit the unique contours and accessories of any rifle. If you change scopes, add rails, or swap firearms, simply pull apart and rebuild the foam cavity around your new setup.
The case meets IP67 waterproof standards and features a rubber gasket seal, so it can survive full submersion to one meter. It also includes a pressure equalization valve to prevent seal damage during altitude or temperature changes. The two padlock-compatible fittings meet TSA requirements and allow you to secure the case for compliant air and vehicle transport.
The case includes three foam layers: one RAGAR reconfigurable foam pad (the modular layer), one solid foam layer for core support, and one egg-crate padding layer for additional cushioning.
The internal dimensions are 42" long, 13.5" wide, and 5.25" tall. Most modern rifle configurations should fit within these bounds, and the reconfigurable foam system allows you to optimize the cavity for your specific firearm and accessories.
