Loading...
Loading...
Loading...
Loading...
EGW
The EGW Tikka T1X 1-piece Picatinny base is a precision scope mount engineered for shooters who demand a solid, dependable foundation for their optics. Built specifically for the Tikka T1X platform, this 0 MOA rail delivers a rock-solid one-piece design that eliminates the complexity and potential loose-ness of split bases—critical when accuracy counts. Whether you're dialing in at the bench or hunting out to mid-range distances, a single-piece base keeps everything indexed in one plane, giving you confidence in your zero.
EGW manufactures this mount in-house using modern CNC machining, then tumbles, sand blasts, and applies Type III hard-anodize for a finish that stands up to weather, handling, and the occasional bump in the truck bed. The full-length Picatinny rail with cross slots means you're not locked into one ring position—slide your rings where they balance best for your scope and shooting style. The base accepts any Picatinny or Weaver scope rings, so you can build the package that works for your setup.
The 0 MOA configuration is the right choice if you're shooting inside 150 yards or prefer zero-cant mounting for close to moderate distance work. Installation is straightforward: EGW specs 20 inch-pounds of torque and a small drop of blue Loctite to keep everything locked in place. The mount ships complete with mounting screws and wrench—everything you need to get it on the gun is included and made in the USA.
| Mount Type | One-piece Picatinny rail |
| Inclination | 0 MOA |
| Compatible Rifles | Tikka T1X |
| Ring Compatibility | Picatinny and Weaver rings |
| Finish | Type III hard-anodize |
| Torque Specification | 20 inch-pounds |
| Made in USA | Yes |
Yes, this base is engineered specifically for the Tikka T1X platform. EGW recommends measuring the hole spacing in your receiver to confirm it matches their published dimensions before purchase.
This Picatinny rail accepts any rings designed for Picatinny or Weaver-pattern bases, giving you flexibility to choose the ring height and configuration that best suits your optic and sight picture.
The 0 MOA configuration is zero-cant mounting, ideal for shooting at ranges from zero to 150 yards. If you're planning shots beyond 150 yards up to 300 yards, EGW offers a separate 20 MOA version that pre-angles the rail to optimize your scope's elevation range at longer distances.
The mount comes with all mounting screws and a wrench—everything you need to install it. You'll need to supply blue Loctite (sold separately) as a thread-locker during installation.
EGW
The EGW Tikka T1X 1-piece Picatinny base is a precision scope mount engineered for shooters who demand a solid, dependable foundation for their optics. Built specifically for the Tikka T1X platform, this 0 MOA rail delivers a rock-solid one-piece design that eliminates the complexity and potential loose-ness of split bases—critical when accuracy counts. Whether you're dialing in at the bench or hunting out to mid-range distances, a single-piece base keeps everything indexed in one plane, giving you confidence in your zero.
EGW manufactures this mount in-house using modern CNC machining, then tumbles, sand blasts, and applies Type III hard-anodize for a finish that stands up to weather, handling, and the occasional bump in the truck bed. The full-length Picatinny rail with cross slots means you're not locked into one ring position—slide your rings where they balance best for your scope and shooting style. The base accepts any Picatinny or Weaver scope rings, so you can build the package that works for your setup.
The 0 MOA configuration is the right choice if you're shooting inside 150 yards or prefer zero-cant mounting for close to moderate distance work. Installation is straightforward: EGW specs 20 inch-pounds of torque and a small drop of blue Loctite to keep everything locked in place. The mount ships complete with mounting screws and wrench—everything you need to get it on the gun is included and made in the USA.
| Mount Type | One-piece Picatinny rail |
| Inclination | 0 MOA |
| Compatible Rifles | Tikka T1X |
| Ring Compatibility | Picatinny and Weaver rings |
| Finish | Type III hard-anodize |
| Torque Specification | 20 inch-pounds |
| Made in USA | Yes |
Yes, this base is engineered specifically for the Tikka T1X platform. EGW recommends measuring the hole spacing in your receiver to confirm it matches their published dimensions before purchase.
This Picatinny rail accepts any rings designed for Picatinny or Weaver-pattern bases, giving you flexibility to choose the ring height and configuration that best suits your optic and sight picture.
The 0 MOA configuration is zero-cant mounting, ideal for shooting at ranges from zero to 150 yards. If you're planning shots beyond 150 yards up to 300 yards, EGW offers a separate 20 MOA version that pre-angles the rail to optimize your scope's elevation range at longer distances.
The mount comes with all mounting screws and a wrench—everything you need to install it. You'll need to supply blue Loctite (sold separately) as a thread-locker during installation.
