Loading...
Loading...
Loading...
Loading...
EGW
The EGW Tikka 695 20 MOA scope base brings modern tactical mounting to your Tikka shotgun without the gunsmith work. This one-piece Picatinny rail mounts directly to your factory receiver holes—no drilling, no tapping—and gives you the 20 MOA elevation built-in for longer-range shooting or slug loads that demand compensation. If you're already running a Picatinny-equipped scope or planning to upgrade from iron sights, this base eliminates the guesswork and lets you dial in your optic's eye relief exactly where you need it.
Built from 6061 T6 extruded aluminum and precision-machined to military spec, the EGW Tikka base is light without sacrificing rigidity. The full-width Picatinny slots are gauged to MIL-STD 1913 tolerances (±.002"), so it plays nicely with any standard Picatinny or Weaver scope ring on the market. Whether you prefer lightweight tactical rings or conventional options, you've got the flexibility to build the setup that works for your hunting or sport-shooting style.
Installation is straightforward: the base comes with socket head Torx screws and a wrench. EGW specs 20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place. Once mounted, you're free to slide your rings along the rail to dial in perfect eye relief, then lock them down for a rock-solid cheek weld.
| Material | 6061 T6 Extruded Aluminum |
| Mount Type | One-Piece Picatinny Rail |
| Elevation | 20 MOA |
| Picatinny Slot Tolerance | ±.002" (MIL-STD 1913) |
| Ring Compatibility | Picatinny and Weaver |
| Recommended Torque | 20 inch-pounds |
| Includes | Socket Head Torx Screws, Wrench |
Yes. The EGW Tikka 695 mounts directly to the factory scope mount holes on your Tikka receiver—no drilling or tapping needed.
Any standard Picatinny or Weaver scope ring will work. You're not locked into a single ring brand or style.
The 20 MOA cant angles the optic upward, giving you more elevation adjustment room in your scope's turret. This is useful for longer-range hunting, slug loads, or shooters who want extra adjustment travel without running out of elevation.
The base comes with socket head Torx screws and a wrench. EGW recommends using 20 inch-pounds of torque and a small amount of blue Loctite when securing it to your receiver.
EGW
The EGW Tikka 695 20 MOA scope base brings modern tactical mounting to your Tikka shotgun without the gunsmith work. This one-piece Picatinny rail mounts directly to your factory receiver holes—no drilling, no tapping—and gives you the 20 MOA elevation built-in for longer-range shooting or slug loads that demand compensation. If you're already running a Picatinny-equipped scope or planning to upgrade from iron sights, this base eliminates the guesswork and lets you dial in your optic's eye relief exactly where you need it.
Built from 6061 T6 extruded aluminum and precision-machined to military spec, the EGW Tikka base is light without sacrificing rigidity. The full-width Picatinny slots are gauged to MIL-STD 1913 tolerances (±.002"), so it plays nicely with any standard Picatinny or Weaver scope ring on the market. Whether you prefer lightweight tactical rings or conventional options, you've got the flexibility to build the setup that works for your hunting or sport-shooting style.
Installation is straightforward: the base comes with socket head Torx screws and a wrench. EGW specs 20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place. Once mounted, you're free to slide your rings along the rail to dial in perfect eye relief, then lock them down for a rock-solid cheek weld.
| Material | 6061 T6 Extruded Aluminum |
| Mount Type | One-Piece Picatinny Rail |
| Elevation | 20 MOA |
| Picatinny Slot Tolerance | ±.002" (MIL-STD 1913) |
| Ring Compatibility | Picatinny and Weaver |
| Recommended Torque | 20 inch-pounds |
| Includes | Socket Head Torx Screws, Wrench |
Yes. The EGW Tikka 695 mounts directly to the factory scope mount holes on your Tikka receiver—no drilling or tapping needed.
Any standard Picatinny or Weaver scope ring will work. You're not locked into a single ring brand or style.
The 20 MOA cant angles the optic upward, giving you more elevation adjustment room in your scope's turret. This is useful for longer-range hunting, slug loads, or shooters who want extra adjustment travel without running out of elevation.
The base comes with socket head Torx screws and a wrench. EGW recommends using 20 inch-pounds of torque and a small amount of blue Loctite when securing it to your receiver.
