Loading...
Loading...
Loading...
Loading...
EGW
The EGW Tikka 695 scope base brings genuine flexibility to your shotgun setup without the gunsmith bill. This one-piece Picatinny rail mounts directly to factory scope mount holes on Tikka receivers—no drilling, no tapping, no permanent modifications. Whether you're running a rifled barrel for slugs or experimenting with different optic configurations, a proper mounting platform beats improvising every time.
Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 specs (±.002"), the EGW base gives you full-width cross-slots that accept both Picatinny and Weaver scope rings. That means you're not locked into one ring system—swap mounting solutions as your needs change. The tactical design includes a milled center channel to keep weight where it matters, and the Picatinny spacing lets you dial in eye relief quickly without repositioning the entire base.
Installation is straightforward: the base comes with socket head Torx screws and the wrench to drive them. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite for a solid, long-term mount. It's a clean, no-fuss way to get a modern optic platform on a shotgun that came with iron sights—or to upgrade an existing setup without tearing into the receiver.
| Brand | EGW |
| Product Type | Scope Base / Picatinny Rail |
| Firearm Fit | Tikka |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Material | 6061 T6 Extruded Aluminum |
| Tolerance | ±.002" |
| Installation | No drilling or tapping required; uses factory scope mount holes |
| Fasteners | Socket head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds |
Yes. The base is drilled to fit the factory scope mount holes on Tikka receivers, so no drilling or tapping is necessary. It mounts directly using the existing holes.
The base accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and the ability to swap between systems as needed.
The base includes socket head Torx screws and a Torx wrench for installation. EGW recommends applying a drop of blue Loctite and torquing to 20 inch-pounds for secure mounting.
Yes. The Picatinny slot-and-rail spacing allows you to move your rings (and scope) forward or backward along the base to dial in eye relief quickly and easily.
EGW
The EGW Tikka 695 scope base brings genuine flexibility to your shotgun setup without the gunsmith bill. This one-piece Picatinny rail mounts directly to factory scope mount holes on Tikka receivers—no drilling, no tapping, no permanent modifications. Whether you're running a rifled barrel for slugs or experimenting with different optic configurations, a proper mounting platform beats improvising every time.
Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 specs (±.002"), the EGW base gives you full-width cross-slots that accept both Picatinny and Weaver scope rings. That means you're not locked into one ring system—swap mounting solutions as your needs change. The tactical design includes a milled center channel to keep weight where it matters, and the Picatinny spacing lets you dial in eye relief quickly without repositioning the entire base.
Installation is straightforward: the base comes with socket head Torx screws and the wrench to drive them. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite for a solid, long-term mount. It's a clean, no-fuss way to get a modern optic platform on a shotgun that came with iron sights—or to upgrade an existing setup without tearing into the receiver.
| Brand | EGW |
| Product Type | Scope Base / Picatinny Rail |
| Firearm Fit | Tikka |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Material | 6061 T6 Extruded Aluminum |
| Tolerance | ±.002" |
| Installation | No drilling or tapping required; uses factory scope mount holes |
| Fasteners | Socket head Torx screws with wrench included |
| Recommended Torque | 20 inch-pounds |
Yes. The base is drilled to fit the factory scope mount holes on Tikka receivers, so no drilling or tapping is necessary. It mounts directly using the existing holes.
The base accepts both Picatinny and Weaver scope rings, giving you flexibility in ring choice and the ability to swap between systems as needed.
The base includes socket head Torx screws and a Torx wrench for installation. EGW recommends applying a drop of blue Loctite and torquing to 20 inch-pounds for secure mounting.
Yes. The Picatinny slot-and-rail spacing allows you to move your rings (and scope) forward or backward along the base to dial in eye relief quickly and easily.
