Loading...
Loading...
Loading...
Loading...
EGW
The EGW Savage Edge and Axis 1-piece Picatinny base is a compact, lightweight scope mount engineered for hunters and shooters who demand precision without unnecessary bulk. Built from 7075 T6 aluminum and finished with Type III hardcoat anodizing, this mount delivers the durability you need in the field while shedding 15% of the weight compared to EGW's other heavy-duty options. A one-piece design means rock-solid rigidity—no wobble, no excuses—and the 0 MOA configuration sits flat for a clean, forward-mounted setup on compatible Savage bolt-action rifles.
Picatinny cross slots run the full length of the rail, giving you the flexibility to position scope rings or other rail-mounted accessories exactly where they belong. The mount accepts any Picatinny or Weaver scope rings, so you're not locked into a single ring brand. Chamfered edges prevent snagging on brush or gear during the hunt, and the compact footprint keeps your rig lighter and more maneuverable. Every component—screws, wrench, and packaging—is made in the USA and machined in-house by EGW, then tumbled, sandblasted, and anodized for lasting protection against the elements.
Installation is straightforward: EGW recommends 20 inch-lbs of torque and a drop of blue Loctite (sold separately) on the mounting screws. Confirm your receiver's hole spacing matches EGW's published dimensions before ordering. This base fits Savage Edge, Savage Axis, Savage Axis II, and Savage Axis XP receivers—but does not fit the Axis II Precision or Axis II Precision XP models, which use different #8-40 screw holes.
| Mount Type | One-Piece Picatinny Base |
| MOA | 0 |
| Material | 7075 T6 Aluminum |
| Finish | Type III Hardcoat Anodize |
| Rail Style | Picatinny (full-length cross slots) |
| Ring Compatibility | Picatinny and Weaver scope rings |
| Recommended Torque | 20 inch-lbs |
| Country of Origin | USA |
This EGW 1-piece Picatinny base is compatible with the Savage Edge, Savage Axis, Savage Axis II, and Savage Axis XP. It does not fit the Savage Axis II Precision or Axis II Precision XP models, which have different receiver drilling for #8-40 screws. Always measure your receiver's hole spacing against EGW's published dimensions to confirm fit before purchase.
Yes. This is a Picatinny-style base that accepts any scope rings designed for Picatinny or Weaver rails. The full-length cross slots also give you flexibility to position rings fore or aft along the rail to achieve your preferred eye relief and sight picture.
You'll need a torque wrench to apply 20 inch-lbs of torque to the mounting screws. EGW recommends applying a drop of blue Loctite to the screw threads before installation; Loctite is sold separately. The mount comes with a wrench for installation.
A one-piece design eliminates potential flex between two separate base components, resulting in more consistent scope stability and zero retention. This translates to tighter groups and more reliable performance in the field, especially over multiple shooting sessions or hunting trips.
EGW
The EGW Savage Edge and Axis 1-piece Picatinny base is a compact, lightweight scope mount engineered for hunters and shooters who demand precision without unnecessary bulk. Built from 7075 T6 aluminum and finished with Type III hardcoat anodizing, this mount delivers the durability you need in the field while shedding 15% of the weight compared to EGW's other heavy-duty options. A one-piece design means rock-solid rigidity—no wobble, no excuses—and the 0 MOA configuration sits flat for a clean, forward-mounted setup on compatible Savage bolt-action rifles.
Picatinny cross slots run the full length of the rail, giving you the flexibility to position scope rings or other rail-mounted accessories exactly where they belong. The mount accepts any Picatinny or Weaver scope rings, so you're not locked into a single ring brand. Chamfered edges prevent snagging on brush or gear during the hunt, and the compact footprint keeps your rig lighter and more maneuverable. Every component—screws, wrench, and packaging—is made in the USA and machined in-house by EGW, then tumbled, sandblasted, and anodized for lasting protection against the elements.
Installation is straightforward: EGW recommends 20 inch-lbs of torque and a drop of blue Loctite (sold separately) on the mounting screws. Confirm your receiver's hole spacing matches EGW's published dimensions before ordering. This base fits Savage Edge, Savage Axis, Savage Axis II, and Savage Axis XP receivers—but does not fit the Axis II Precision or Axis II Precision XP models, which use different #8-40 screw holes.
| Mount Type | One-Piece Picatinny Base |
| MOA | 0 |
| Material | 7075 T6 Aluminum |
| Finish | Type III Hardcoat Anodize |
| Rail Style | Picatinny (full-length cross slots) |
| Ring Compatibility | Picatinny and Weaver scope rings |
| Recommended Torque | 20 inch-lbs |
| Country of Origin | USA |
This EGW 1-piece Picatinny base is compatible with the Savage Edge, Savage Axis, Savage Axis II, and Savage Axis XP. It does not fit the Savage Axis II Precision or Axis II Precision XP models, which have different receiver drilling for #8-40 screws. Always measure your receiver's hole spacing against EGW's published dimensions to confirm fit before purchase.
Yes. This is a Picatinny-style base that accepts any scope rings designed for Picatinny or Weaver rails. The full-length cross slots also give you flexibility to position rings fore or aft along the rail to achieve your preferred eye relief and sight picture.
You'll need a torque wrench to apply 20 inch-lbs of torque to the mounting screws. EGW recommends applying a drop of blue Loctite to the screw threads before installation; Loctite is sold separately. The mount comes with a wrench for installation.
A one-piece design eliminates potential flex between two separate base components, resulting in more consistent scope stability and zero retention. This translates to tighter groups and more reliable performance in the field, especially over multiple shooting sessions or hunting trips.
