Loading...
Loading...
Loading...
Loading...
EGW
The EGW Savage Edge/Axis 0 MOA scope base is a one-piece Picatinny rail system engineered to upgrade Savage Edge and Axis shotguns without drilling or tapping the receiver. If you're running a shotgun that deserves optics but want to preserve the factory receiver, this mount lets you attach any Picatinny or Weaver scope ring to a precision-machined aluminum platform that uses your gun's existing factory scope mount holes. It's a straightforward way to add riflescope versatility to your shotgun setup.
Built from 6061 T6 extruded aluminum, the EGW base is lightweight yet rigid, with full-width Picatinny slots gauged to military standard (MIL-STD 1913) tolerances of ±0.002 inches. That precision means repeatable, secure ring seating and the freedom to dial in eye relief exactly where you need it—then swap rings or scopes without losing zero. The milled center channel reduces weight without sacrificing strength, keeping your shotgun handling light while maintaining the platform's structural integrity.
Installation is straightforward: the base drills and taps to fit Savage factory mount holes, and EGW supplies socket head Torx screws and a wrench in the box. The factory recommends 20 inch-pounds of torque and a drop of blue threadlocker for a permanent, secure fit. Once mounted, you're running a true tactical-grade rail that accepts any standard optic platform you choose.
| Manufacturer | EGW |
| Product | Savage Edge/Axis 0 MOA Scope Base |
| Material | 6061 T6 Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Slot Tolerance | ±0.002 inches |
| Compatibility | Savage Edge, Axis shotguns with factory scope mount holes |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Recommended Torque | 20 inch-pounds |
| Fasteners Included | Socket head Torx screws, wrench |
Yes, the EGW Savage Edge/Axis 0 MOA base is engineered specifically for these models and uses the factory scope mount holes on the receiver, so no drilling or tapping is needed.
The base accepts any Picatinny or Weaver scope rings, giving you flexibility in choosing optics and rings that suit your setup and budget.
The base comes with socket head Torx screws and a wrench for installation. EGW recommends using 20 inch-pounds of torque and blue threadlocker when mounting.
Once installed with blue threadlocker and proper torque, it's a solid, durable setup. The precision Picatinny slots allow you to swap rings or adjust optics without removing the base from the receiver.
EGW
The EGW Savage Edge/Axis 0 MOA scope base is a one-piece Picatinny rail system engineered to upgrade Savage Edge and Axis shotguns without drilling or tapping the receiver. If you're running a shotgun that deserves optics but want to preserve the factory receiver, this mount lets you attach any Picatinny or Weaver scope ring to a precision-machined aluminum platform that uses your gun's existing factory scope mount holes. It's a straightforward way to add riflescope versatility to your shotgun setup.
Built from 6061 T6 extruded aluminum, the EGW base is lightweight yet rigid, with full-width Picatinny slots gauged to military standard (MIL-STD 1913) tolerances of ±0.002 inches. That precision means repeatable, secure ring seating and the freedom to dial in eye relief exactly where you need it—then swap rings or scopes without losing zero. The milled center channel reduces weight without sacrificing strength, keeping your shotgun handling light while maintaining the platform's structural integrity.
Installation is straightforward: the base drills and taps to fit Savage factory mount holes, and EGW supplies socket head Torx screws and a wrench in the box. The factory recommends 20 inch-pounds of torque and a drop of blue threadlocker for a permanent, secure fit. Once mounted, you're running a true tactical-grade rail that accepts any standard optic platform you choose.
| Manufacturer | EGW |
| Product | Savage Edge/Axis 0 MOA Scope Base |
| Material | 6061 T6 Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Slot Tolerance | ±0.002 inches |
| Compatibility | Savage Edge, Axis shotguns with factory scope mount holes |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Recommended Torque | 20 inch-pounds |
| Fasteners Included | Socket head Torx screws, wrench |
Yes, the EGW Savage Edge/Axis 0 MOA base is engineered specifically for these models and uses the factory scope mount holes on the receiver, so no drilling or tapping is needed.
The base accepts any Picatinny or Weaver scope rings, giving you flexibility in choosing optics and rings that suit your setup and budget.
The base comes with socket head Torx screws and a wrench for installation. EGW recommends using 20 inch-pounds of torque and blue threadlocker when mounting.
Once installed with blue threadlocker and proper torque, it's a solid, durable setup. The precision Picatinny slots allow you to swap rings or adjust optics without removing the base from the receiver.
