Loading...
Loading...
Loading...
Loading...
EGW
The EGW S&W 52 Vortex Viper/Venom sight mount is a dovetail adapter that lets you mount a modern red dot to your Smith & Wesson Model 52 by replacing the factory rear sight. This mount is compatible with Vortex Viper and Venom red dots, and also accepts Burris FastFire and Docter sights—giving you flexibility to choose the optic that fits your shooting style. The progressive-taper dovetail design makes installation straightforward: remove your rear sight, slide this mount into the dovetail, and secure your red dot. You can remove it anytime and return to iron sights, so there's no permanent modification to your gun.
The mount ships with all hardware you need: button head cap screws for Vortex sights and flat head cap screws for Burris and Docter models. Installation is manual and requires a 5/64" Allen wrench. The included instructions specify torquing the red dot mounting screws to 15 in/lbs and applying blue Loctite for a secure, repeatable hold. EGW's dovetail fit is cut specifically for the Model 52, so compatibility is precise and there's minimal wobble or shift under recoil.
This is a straightforward way to add an optic to a S&W 52 without bubba-ing your receiver or drilling for rings. Whether you're shooting competition, hunting, or just want a faster sight picture on an accurate pistol, a quality red dot transforms how the gun handles. Installation should be done carefully to avoid damaging the dovetail or sight, so consider having a qualified gunsmith handle the work if you're not confident with small mechanical tasks.
| Firearm Compatibility | Smith & Wesson Model 52 |
| Red Dot Compatibility | Vortex Viper, Vortex Venom, Burris FastFire, Docter |
| Mount Type | Dovetail adapter (replaces rear sight) |
| Allen Wrench Size | 5/64" |
| Torque Specification | 15 in/lbs (mounting screws) |
| Loctite Recommended | Blue |
| Hardware Included | 2 button head cap screws (Vortex), 2 flat head cap screws (Burris/Docter) |
No. This mount is machined for the S&W Model 52 dovetail only and will not fit the Model 41.
Yes. The mount includes button head cap screws sized for Vortex Viper and Venom sights. Flat head cap screws are also provided if you plan to run a Burris FastFire or Docter sight instead.
You remove your factory rear sight and install the EGW mount in its place. The rear sight comes off without modification, so you can reinstall it later if you want to return to iron sights only.
Installation requires basic mechanical care and an Allen wrench. The instructions are straightforward, but if you're unfamiliar with firearms work, a qualified gunsmith can ensure proper fit and prevent damage to the dovetail. Improper installation may cause issues, so take your time or have a professional handle it.
EGW
The EGW S&W 52 Vortex Viper/Venom sight mount is a dovetail adapter that lets you mount a modern red dot to your Smith & Wesson Model 52 by replacing the factory rear sight. This mount is compatible with Vortex Viper and Venom red dots, and also accepts Burris FastFire and Docter sights—giving you flexibility to choose the optic that fits your shooting style. The progressive-taper dovetail design makes installation straightforward: remove your rear sight, slide this mount into the dovetail, and secure your red dot. You can remove it anytime and return to iron sights, so there's no permanent modification to your gun.
The mount ships with all hardware you need: button head cap screws for Vortex sights and flat head cap screws for Burris and Docter models. Installation is manual and requires a 5/64" Allen wrench. The included instructions specify torquing the red dot mounting screws to 15 in/lbs and applying blue Loctite for a secure, repeatable hold. EGW's dovetail fit is cut specifically for the Model 52, so compatibility is precise and there's minimal wobble or shift under recoil.
This is a straightforward way to add an optic to a S&W 52 without bubba-ing your receiver or drilling for rings. Whether you're shooting competition, hunting, or just want a faster sight picture on an accurate pistol, a quality red dot transforms how the gun handles. Installation should be done carefully to avoid damaging the dovetail or sight, so consider having a qualified gunsmith handle the work if you're not confident with small mechanical tasks.
| Firearm Compatibility | Smith & Wesson Model 52 |
| Red Dot Compatibility | Vortex Viper, Vortex Venom, Burris FastFire, Docter |
| Mount Type | Dovetail adapter (replaces rear sight) |
| Allen Wrench Size | 5/64" |
| Torque Specification | 15 in/lbs (mounting screws) |
| Loctite Recommended | Blue |
| Hardware Included | 2 button head cap screws (Vortex), 2 flat head cap screws (Burris/Docter) |
No. This mount is machined for the S&W Model 52 dovetail only and will not fit the Model 41.
Yes. The mount includes button head cap screws sized for Vortex Viper and Venom sights. Flat head cap screws are also provided if you plan to run a Burris FastFire or Docter sight instead.
You remove your factory rear sight and install the EGW mount in its place. The rear sight comes off without modification, so you can reinstall it later if you want to return to iron sights only.
Installation requires basic mechanical care and an Allen wrench. The instructions are straightforward, but if you're unfamiliar with firearms work, a qualified gunsmith can ensure proper fit and prevent damage to the dovetail. Improper installation may cause issues, so take your time or have a professional handle it.
