Loading...
Loading...
Loading...
Loading...
EGW
The EGW Ruger PC Carbine Vortex Viper/Venom sight mount gives you a clean, reversible way to run a modern red dot on your PC Carbine without permanent modifications. Built from 7075 aluminum with a matte black hardcoat finish, this mount slides into your gun's rear dovetail and accepts Vortex Viper or Venom optics—plus Burris FastFire and Docter models—right out of the box. The progressive dovetail taper makes installation straightforward, and you can swap it out or remove it entirely whenever you want, putting your original rear sight back in seconds.
What makes this mount stand out is its simplicity and reversibility. No gunsmithing, no permanent cuts, no drilling. The mounting interface is designed to work left-to-right orientation (muzzle forward), and EGW includes all the hardware you need—button head screws for Vortex optics, flat head screws for Burris and Docter—plus a set screw for extra security. The 5/64" allen wrench requirement keeps installation tool-simple for any shooter willing to spend five minutes with the manual.
This is the move if you want to modernize your PC Carbine's sighting system without commitment. Whether you're upgrading from iron sights to a Viper or Venom for better target acquisition, or you rotate red dots between guns, EGW's reversible mount keeps your options open.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.811" |
| Overall Width | .99" |
| Red Dot Compatibility | Vortex Viper, Vortex Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter |
| Included Hardware | 2 Button Head Screws (6-32), 2 Flat Head Screws (6-32), 1 Set Screw (6-32) |
| Tool Required | 5/64" Allen Wrench |
Yes. The EGW mount is designed to drop into your PC Carbine's rear dovetail without modification. Its progressive taper dovetail makes installation straightforward. Simply remove your factory rear sight and slide the mount in place.
The mount is engineered for Vortex Viper and Venom optics. It also accepts Burris FastFire, Crimson Trace CTS-1200, CTS-1300, and Docter red dots. Use the included button head screws for Vortex sights, and flat head screws for Burris and Docter models.
Absolutely. This mount is completely reversible. Remove it anytime and reinstall your factory rear sight—no permanent changes to your carbine.
EGW includes two button head 6-32 screws (for Vortex Viper/Venom), two flat head 6-32 screws (for Burris FastFire and Docter), and one 6-32 set screw. You'll need a 5/64" Allen wrench to install them.
EGW
The EGW Ruger PC Carbine Vortex Viper/Venom sight mount gives you a clean, reversible way to run a modern red dot on your PC Carbine without permanent modifications. Built from 7075 aluminum with a matte black hardcoat finish, this mount slides into your gun's rear dovetail and accepts Vortex Viper or Venom optics—plus Burris FastFire and Docter models—right out of the box. The progressive dovetail taper makes installation straightforward, and you can swap it out or remove it entirely whenever you want, putting your original rear sight back in seconds.
What makes this mount stand out is its simplicity and reversibility. No gunsmithing, no permanent cuts, no drilling. The mounting interface is designed to work left-to-right orientation (muzzle forward), and EGW includes all the hardware you need—button head screws for Vortex optics, flat head screws for Burris and Docter—plus a set screw for extra security. The 5/64" allen wrench requirement keeps installation tool-simple for any shooter willing to spend five minutes with the manual.
This is the move if you want to modernize your PC Carbine's sighting system without commitment. Whether you're upgrading from iron sights to a Viper or Venom for better target acquisition, or you rotate red dots between guns, EGW's reversible mount keeps your options open.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.811" |
| Overall Width | .99" |
| Red Dot Compatibility | Vortex Viper, Vortex Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter |
| Included Hardware | 2 Button Head Screws (6-32), 2 Flat Head Screws (6-32), 1 Set Screw (6-32) |
| Tool Required | 5/64" Allen Wrench |
Yes. The EGW mount is designed to drop into your PC Carbine's rear dovetail without modification. Its progressive taper dovetail makes installation straightforward. Simply remove your factory rear sight and slide the mount in place.
The mount is engineered for Vortex Viper and Venom optics. It also accepts Burris FastFire, Crimson Trace CTS-1200, CTS-1300, and Docter red dots. Use the included button head screws for Vortex sights, and flat head screws for Burris and Docter models.
Absolutely. This mount is completely reversible. Remove it anytime and reinstall your factory rear sight—no permanent changes to your carbine.
EGW includes two button head 6-32 screws (for Vortex Viper/Venom), two flat head 6-32 screws (for Burris FastFire and Docter), and one 6-32 set screw. You'll need a 5/64" Allen wrench to install them.
