Loading...
Loading...
Loading...
Loading...
EGW
The EGW Remington 541 scope base gives you a modern Picatinny rail solution for your Remington 541 rifle without any gunsmithing. This one-piece aluminum mount installs directly into your rifle's factory scope mount holes—no drilling, no tapping, no trips to the gunsmith. If you've been running iron sights or an older two-piece base and want the flexibility to swap optics or adjust eye relief quickly, this base opens up your mounting options while keeping things simple and solid.
Built from 6061 T6 extruded aluminum, the EGW Remington 541 scope base is precision machined to MIL-STD 1913 Picatinny specifications and weighs less than bulkier steel alternatives. The full-width cross-slots are gauged to +/-.002" tolerances, so your rings will fit tight and stay put. Whether you're going with Picatinny rings, Weaver rings, or switching between them, this base handles it all. The milled center channel keeps weight down without sacrificing rigidity—useful if you're building a lighter rifle or just prefer keeping things trim.
Installation is straightforward: the base fits the Remington 541's receiver footprint and comes with socket head Torx screws and the wrench to install them. EGW recommends 20 inch-pounds of torque and a small drop of blue Loctite to keep everything locked in place during use. Once mounted, you'll have the adjustability to dial in your ideal eye relief and the flexibility to upgrade or change scopes without a trip back to the bench.
| Brand | EGW |
| Firearm Compatibility | Remington 541 |
| Mount Type | One-piece scope base |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver rings |
| Material | 6061 T6 extruded aluminum |
| Slot Tolerance | +/-.002" |
| Recommended Torque | 20 inch-pounds |
| Installation Hardware | Socket head Torx screws and wrench included |
Yes. The EGW base is drilled to fit the factory scope mount holes on the Remington 541 receiver, so installation requires no drilling, tapping, or additional machining. You'll need only the included Torx screws and wrench.
This base accepts both Picatinny and Weaver scope rings, giving you flexibility in choosing rings that fit your budget, ring height preference, and scope size.
The EGW Remington 541 base includes the one-piece aluminum rail, socket head Torx screws for attachment, and the wrench needed to install it. You'll need to provide your own scope rings and scope.
EGW recommends 20 inch-pounds of torque. The company also suggests applying a small amount of blue Loctite to the screws to ensure they stay locked during use.
EGW
The EGW Remington 541 scope base gives you a modern Picatinny rail solution for your Remington 541 rifle without any gunsmithing. This one-piece aluminum mount installs directly into your rifle's factory scope mount holes—no drilling, no tapping, no trips to the gunsmith. If you've been running iron sights or an older two-piece base and want the flexibility to swap optics or adjust eye relief quickly, this base opens up your mounting options while keeping things simple and solid.
Built from 6061 T6 extruded aluminum, the EGW Remington 541 scope base is precision machined to MIL-STD 1913 Picatinny specifications and weighs less than bulkier steel alternatives. The full-width cross-slots are gauged to +/-.002" tolerances, so your rings will fit tight and stay put. Whether you're going with Picatinny rings, Weaver rings, or switching between them, this base handles it all. The milled center channel keeps weight down without sacrificing rigidity—useful if you're building a lighter rifle or just prefer keeping things trim.
Installation is straightforward: the base fits the Remington 541's receiver footprint and comes with socket head Torx screws and the wrench to install them. EGW recommends 20 inch-pounds of torque and a small drop of blue Loctite to keep everything locked in place during use. Once mounted, you'll have the adjustability to dial in your ideal eye relief and the flexibility to upgrade or change scopes without a trip back to the bench.
| Brand | EGW |
| Firearm Compatibility | Remington 541 |
| Mount Type | One-piece scope base |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver rings |
| Material | 6061 T6 extruded aluminum |
| Slot Tolerance | +/-.002" |
| Recommended Torque | 20 inch-pounds |
| Installation Hardware | Socket head Torx screws and wrench included |
Yes. The EGW base is drilled to fit the factory scope mount holes on the Remington 541 receiver, so installation requires no drilling, tapping, or additional machining. You'll need only the included Torx screws and wrench.
This base accepts both Picatinny and Weaver scope rings, giving you flexibility in choosing rings that fit your budget, ring height preference, and scope size.
The EGW Remington 541 base includes the one-piece aluminum rail, socket head Torx screws for attachment, and the wrench needed to install it. You'll need to provide your own scope rings and scope.
EGW recommends 20 inch-pounds of torque. The company also suggests applying a small amount of blue Loctite to the screws to ensure they stay locked during use.
