Loading...
Loading...
Loading...
Loading...
EGW
The EGW Rem 700, 721, 725 Long Action 0 MOA scope base gives you a rock-solid foundation for mounting optics on your Remington 700 series rifle. This one-piece Picatinny rail mounts directly to your rifle's factory receiver holes with zero drilling or tapping required—a massive advantage if you want to keep your receiver stock or avoid permanent modifications. It's built from 6061 T6 aluminum, precision-machined to withstand the rigors of hunting, long-range shooting, and field work.
What makes this base stand out is its flexibility. The full-width Picatinny slots are gauged to MIL-STD 1913 specs (±.002"), so you can use it with any Picatinny or Weaver scope rings. That means you're not locked into one ring system or forced to buy proprietary hardware. The 0 MOA design keeps your setup simple and lets your scope's internal adjustments handle elevation changes—a clean, proven approach favored by hunters and shooters who want reliability over complexity. The milled center channel reduces weight without sacrificing rigidity, and you'll get fast, repeatable adjustments in eye relief since the slots let you slide rings along the rail.
Installation is straightforward: socket head Torx screws and wrench are included. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to lock everything down permanently. Whether you're mounting a hunting scope, a tactical optic, or swapping between multiple rings on the same base, this mount handles the job with the durability and precision you expect from a dedicated long-action platform.
| Brand | EGW |
| Fits | Remington 700, 721, 725 Long Action |
| Mount Type | One-piece Picatinny rail |
| MOA | 0 |
| Material | 6061 T6 aluminum |
| Compatible Ring Systems | Picatinny and Weaver |
| Picatinny Slot Spacing | MIL-STD 1913 (±.002") |
| Installation | Factory scope mount holes; no drilling or tapping |
| Hardware | Socket head Torx screws and wrench included |
| Recommended Torque | 20 inch-pounds |
Yes, the EGW Rem 700, 721, 725 Long Action 0 MOA base is designed for those specific long-action receivers. It mounts directly to the factory scope mount holes on your receiver with no drilling, tapping, or permanent modifications.
Any rings designed for Picatinny or Weaver rails will work. This gives you flexibility to choose rings that suit your scope diameter, your preferred ring height, and your budget—you're not locked into a proprietary system.
The base comes with socket head Torx screws and a wrench for installation. EGW recommends applying blue Loctite and torquing the fasteners to 20 inch-pounds for secure mounting.
A 0 MOA base keeps the receiver flat and lets your scope's internal elevation adjustments handle all the correction work. This is a clean, proven design that works well for standard hunting and shooting applications. If you need cant for extreme long-range work, a 20 MOA base is a different product option.
EGW
The EGW Rem 700, 721, 725 Long Action 0 MOA scope base gives you a rock-solid foundation for mounting optics on your Remington 700 series rifle. This one-piece Picatinny rail mounts directly to your rifle's factory receiver holes with zero drilling or tapping required—a massive advantage if you want to keep your receiver stock or avoid permanent modifications. It's built from 6061 T6 aluminum, precision-machined to withstand the rigors of hunting, long-range shooting, and field work.
What makes this base stand out is its flexibility. The full-width Picatinny slots are gauged to MIL-STD 1913 specs (±.002"), so you can use it with any Picatinny or Weaver scope rings. That means you're not locked into one ring system or forced to buy proprietary hardware. The 0 MOA design keeps your setup simple and lets your scope's internal adjustments handle elevation changes—a clean, proven approach favored by hunters and shooters who want reliability over complexity. The milled center channel reduces weight without sacrificing rigidity, and you'll get fast, repeatable adjustments in eye relief since the slots let you slide rings along the rail.
Installation is straightforward: socket head Torx screws and wrench are included. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to lock everything down permanently. Whether you're mounting a hunting scope, a tactical optic, or swapping between multiple rings on the same base, this mount handles the job with the durability and precision you expect from a dedicated long-action platform.
| Brand | EGW |
| Fits | Remington 700, 721, 725 Long Action |
| Mount Type | One-piece Picatinny rail |
| MOA | 0 |
| Material | 6061 T6 aluminum |
| Compatible Ring Systems | Picatinny and Weaver |
| Picatinny Slot Spacing | MIL-STD 1913 (±.002") |
| Installation | Factory scope mount holes; no drilling or tapping |
| Hardware | Socket head Torx screws and wrench included |
| Recommended Torque | 20 inch-pounds |
Yes, the EGW Rem 700, 721, 725 Long Action 0 MOA base is designed for those specific long-action receivers. It mounts directly to the factory scope mount holes on your receiver with no drilling, tapping, or permanent modifications.
Any rings designed for Picatinny or Weaver rails will work. This gives you flexibility to choose rings that suit your scope diameter, your preferred ring height, and your budget—you're not locked into a proprietary system.
The base comes with socket head Torx screws and a wrench for installation. EGW recommends applying blue Loctite and torquing the fasteners to 20 inch-pounds for secure mounting.
A 0 MOA base keeps the receiver flat and lets your scope's internal elevation adjustments handle all the correction work. This is a clean, proven design that works well for standard hunting and shooting applications. If you need cant for extreme long-range work, a 20 MOA base is a different product option.
