Loading...
Loading...
Loading...
Loading...
EGW
The EGW CZ P10C Trijicon RMR sight mount transforms your polymer-framed tactical pistol into a modern optics platform. If you're running a CZ P10C and want the advantages of a red dot sight without gunsmithing, this dovetail-mounted solution gets you there in minutes. Simply remove your factory rear sight, slip the EGW mount into the dovetail, and you're ready to bolt down your Trijicon RMR or compatible optic—no permanent alterations, no trips to a gunsmith.
Built from 7075 aluminum and finished in matte black, this mount is lightweight and durable enough for duty or competition use. The design accepts Trijicon RMR footprint optics and is also compatible with the Holosun HS507C, giving you flexibility in red dot choice. Installation uses two 6-32 flat head screws (included, along with a set screw for added security) and a standard 5/64" allen wrench. If you ever want to go back to iron sights, you can remove the mount and reinstall your original rear sight with no permanent damage to the firearm.
Assembly is straightforward: mount the dovetail adapter to your P10C, apply a small piece of paper between the red dot and mount for clean removal later, then secure with blue Loctite torqued to 15 in/lbs. The included mounting hardware takes the guesswork out of the job. Whether you're building a carry gun with a modern sight picture or setting up for the range, this mount is a solid, reversible upgrade that respects the integrity of your pistol.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Red Dot Compatibility | Trijicon RMR, Holosun HS507C |
| Included Hardware | 2× 6-32 Flat Head Screws, 1× 6-32 × 3/16 Set Screw |
| Tool Required | 5/64" Allen Wrench |
| Recommended Torque | 15 in/lbs |
Yes. This mount is designed to fit the CZ P10C dovetail. It also fits Baby Desert Eagle (Post 2006) and EAA Witness Elite Match platforms. It does not fit Rock Island 1911s or other dovetail standards.
Yes. The mount accepts both Trijicon RMR and Holosun HS507C footprint optics. Installation requires the 6-32 flat head screws provided and blue Loctite, torqued to 15 in/lbs.
The mount comes with two 6-32 flat head cap screws, one 6-32 × 3/16 set screw, and a detailed installation guide. You'll need a 5/64" allen wrench (standard tool) to install the screws. Blue Loctite is recommended but not included.
Yes. The EGW mount is fully reversible. Simply remove it from the dovetail and reinstall your original rear sight. No permanent modifications are made to your firearm.
EGW
The EGW CZ P10C Trijicon RMR sight mount transforms your polymer-framed tactical pistol into a modern optics platform. If you're running a CZ P10C and want the advantages of a red dot sight without gunsmithing, this dovetail-mounted solution gets you there in minutes. Simply remove your factory rear sight, slip the EGW mount into the dovetail, and you're ready to bolt down your Trijicon RMR or compatible optic—no permanent alterations, no trips to a gunsmith.
Built from 7075 aluminum and finished in matte black, this mount is lightweight and durable enough for duty or competition use. The design accepts Trijicon RMR footprint optics and is also compatible with the Holosun HS507C, giving you flexibility in red dot choice. Installation uses two 6-32 flat head screws (included, along with a set screw for added security) and a standard 5/64" allen wrench. If you ever want to go back to iron sights, you can remove the mount and reinstall your original rear sight with no permanent damage to the firearm.
Assembly is straightforward: mount the dovetail adapter to your P10C, apply a small piece of paper between the red dot and mount for clean removal later, then secure with blue Loctite torqued to 15 in/lbs. The included mounting hardware takes the guesswork out of the job. Whether you're building a carry gun with a modern sight picture or setting up for the range, this mount is a solid, reversible upgrade that respects the integrity of your pistol.
| Material | 7075 Aluminum |
| Finish | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Red Dot Compatibility | Trijicon RMR, Holosun HS507C |
| Included Hardware | 2× 6-32 Flat Head Screws, 1× 6-32 × 3/16 Set Screw |
| Tool Required | 5/64" Allen Wrench |
| Recommended Torque | 15 in/lbs |
Yes. This mount is designed to fit the CZ P10C dovetail. It also fits Baby Desert Eagle (Post 2006) and EAA Witness Elite Match platforms. It does not fit Rock Island 1911s or other dovetail standards.
Yes. The mount accepts both Trijicon RMR and Holosun HS507C footprint optics. Installation requires the 6-32 flat head screws provided and blue Loctite, torqued to 15 in/lbs.
The mount comes with two 6-32 flat head cap screws, one 6-32 × 3/16 set screw, and a detailed installation guide. You'll need a 5/64" allen wrench (standard tool) to install the screws. Blue Loctite is recommended but not included.
Yes. The EGW mount is fully reversible. Simply remove it from the dovetail and reinstall your original rear sight. No permanent modifications are made to your firearm.
