Loading...
Loading...
Loading...
Loading...
EGW
The EGW Browning A-Bolt WSSM scope base delivers precision and flexibility for shooters who want to upgrade their Browning A-Bolt rifle without gunsmithing. This one-piece Picatinny rail mounts directly to your factory receiver holes—no drilling, no tapping—and gives you the freedom to adjust eye relief quickly or swap scope rings without permanent modifications. Whether you're setting up a hunting rifle or a range gun, this mount lets you dial in the perfect sight picture and experiment with different optics.
Built from 6061-T6 extruded aluminum, the base is rigid and lightweight, with a milled center channel that keeps weight minimal without compromising strength. The full-width Picatinny slots are gauged to military spec (MIL-STD 1913) with precision tolerances of ±0.002 inches—tight enough to work flawlessly with both Picatinny and Weaver rings. Socket head Torx screws and a wrench come in the box, so you're ready to mount out of the gate. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to lock everything down securely.
If you're running an A-Bolt WSSM and tired of factory rails or want the reliability of a one-piece design, this base is a straightforward, shop-friendly solution. It ships complete and ready to use.
| Brand | EGW |
| Product Type | Scope Base |
| Fit | Browning A-Bolt WSSM |
| Rail Type | Picatinny (MIL-STD 1913) |
| Material | 6061-T6 Extruded Aluminum |
| Ring Compatibility | Picatinny or Weaver |
| Slot Tolerance | ±0.002″ |
| Installation | Factory receiver holes—no drilling required |
| Recommended Torque | 20 inch-pounds |
| Included Accessories | Socket head Torx screws, wrench |
Yes. The EGW base is drilled to align with your rifle's factory scope mount holes, so installation requires no drilling or tapping—just bolt it down.
The mount accepts both Picatinny and Weaver scope rings, so you have flexibility in ring choice. Make sure your rings match the Picatinny slot spacing.
The mount ships with socket head Torx screws and a wrench. EGW recommends applying a small drop of blue Loctite and torquing to 20 inch-pounds for a secure, permanent fit.
Yes. The Picatinny design allows you to slide rings along the rail to fine-tune eye relief or swap scopes without removing the base from the rifle.
EGW
The EGW Browning A-Bolt WSSM scope base delivers precision and flexibility for shooters who want to upgrade their Browning A-Bolt rifle without gunsmithing. This one-piece Picatinny rail mounts directly to your factory receiver holes—no drilling, no tapping—and gives you the freedom to adjust eye relief quickly or swap scope rings without permanent modifications. Whether you're setting up a hunting rifle or a range gun, this mount lets you dial in the perfect sight picture and experiment with different optics.
Built from 6061-T6 extruded aluminum, the base is rigid and lightweight, with a milled center channel that keeps weight minimal without compromising strength. The full-width Picatinny slots are gauged to military spec (MIL-STD 1913) with precision tolerances of ±0.002 inches—tight enough to work flawlessly with both Picatinny and Weaver rings. Socket head Torx screws and a wrench come in the box, so you're ready to mount out of the gate. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to lock everything down securely.
If you're running an A-Bolt WSSM and tired of factory rails or want the reliability of a one-piece design, this base is a straightforward, shop-friendly solution. It ships complete and ready to use.
| Brand | EGW |
| Product Type | Scope Base |
| Fit | Browning A-Bolt WSSM |
| Rail Type | Picatinny (MIL-STD 1913) |
| Material | 6061-T6 Extruded Aluminum |
| Ring Compatibility | Picatinny or Weaver |
| Slot Tolerance | ±0.002″ |
| Installation | Factory receiver holes—no drilling required |
| Recommended Torque | 20 inch-pounds |
| Included Accessories | Socket head Torx screws, wrench |
Yes. The EGW base is drilled to align with your rifle's factory scope mount holes, so installation requires no drilling or tapping—just bolt it down.
The mount accepts both Picatinny and Weaver scope rings, so you have flexibility in ring choice. Make sure your rings match the Picatinny slot spacing.
The mount ships with socket head Torx screws and a wrench. EGW recommends applying a small drop of blue Loctite and torquing to 20 inch-pounds for a secure, permanent fit.
Yes. The Picatinny design allows you to slide rings along the rail to fine-tune eye relief or swap scopes without removing the base from the rifle.
