Loading...
Loading...
Loading...
Loading...
EGW
The EGW Beavertail Grip Safety in stainless steel is a precision-machined replacement for 1911 shooters who want a custom-fitted, secure grip without the rattle and play of lesser parts. Machined from solid barstock, this beavertail grip safety is engineered to accommodate the gunsmith's hand rather than force your frame to fit it—a detail that makes the difference between a loose, noisy fit and one that feels locked in place. Built for discerning builders and gunsmiths who understand that the little parts matter just as much as the big ones.
EGW sized this beavertail wider than the frame itself, so fit is achieved by carefully contouring the safety to match your specific frame—not the other way around. The geometry is optimized to close the gap between the mainspring housing and the safety tang, reducing the chance of pressure points or uncomfortable binding. The radius is ground to .245" to suit frames pre-cut to the .250" standard, and the pin hole is finish-reamed to .158" for smooth operation and precise alignment. The large contact pad provides positive, confident engagement every time you grip the gun, and the longer overall length at the bottom follows the natural slope of the frame.
This is a gunsmith-grade part for 1911 platforms, specifically fitted to Springfield and Caspian frames. If you're building or refining a 1911, the time you spend getting the grip safety right pays dividends in comfort, reliability, and that solid feel that separates a quality build from a merely functional one.
| Material | Stainless Steel |
| Type | Beavertail Grip Safety |
| Radius | .245" |
| Pin Hole Diameter | .158" (finish-reamed) |
| Compatibility | Springfield and Caspian 1911 frames (pre-cut to .250") |
| Construction | Solid barstock, machined |
The EGW Beavertail is designed for Springfield and Caspian 1911 frames that are pre-cut to accept a .250" radius. It is the gunsmith's responsibility to final-fit the safety to ensure proper function and engagement with the specific frame.
The oversized design lets the gunsmith achieve a true custom fit by contouring the safety to the frame, rather than forcing the frame to conform to the safety. This approach results in a snug, rattle-free fit with no binding or pressure points.
Yes. The longer overall length at the bottom and optimized angle are designed to fill the gap between the mainspring housing and the safety, improving both fit and function.
The EGW Beavertail is a gunsmith-grade component machined from solid barstock to allow for precise custom fitting. Final fitting and installation should be performed by a qualified gunsmith to ensure proper function and safety.
EGW
The EGW Beavertail Grip Safety in stainless steel is a precision-machined replacement for 1911 shooters who want a custom-fitted, secure grip without the rattle and play of lesser parts. Machined from solid barstock, this beavertail grip safety is engineered to accommodate the gunsmith's hand rather than force your frame to fit it—a detail that makes the difference between a loose, noisy fit and one that feels locked in place. Built for discerning builders and gunsmiths who understand that the little parts matter just as much as the big ones.
EGW sized this beavertail wider than the frame itself, so fit is achieved by carefully contouring the safety to match your specific frame—not the other way around. The geometry is optimized to close the gap between the mainspring housing and the safety tang, reducing the chance of pressure points or uncomfortable binding. The radius is ground to .245" to suit frames pre-cut to the .250" standard, and the pin hole is finish-reamed to .158" for smooth operation and precise alignment. The large contact pad provides positive, confident engagement every time you grip the gun, and the longer overall length at the bottom follows the natural slope of the frame.
This is a gunsmith-grade part for 1911 platforms, specifically fitted to Springfield and Caspian frames. If you're building or refining a 1911, the time you spend getting the grip safety right pays dividends in comfort, reliability, and that solid feel that separates a quality build from a merely functional one.
| Material | Stainless Steel |
| Type | Beavertail Grip Safety |
| Radius | .245" |
| Pin Hole Diameter | .158" (finish-reamed) |
| Compatibility | Springfield and Caspian 1911 frames (pre-cut to .250") |
| Construction | Solid barstock, machined |
The EGW Beavertail is designed for Springfield and Caspian 1911 frames that are pre-cut to accept a .250" radius. It is the gunsmith's responsibility to final-fit the safety to ensure proper function and engagement with the specific frame.
The oversized design lets the gunsmith achieve a true custom fit by contouring the safety to the frame, rather than forcing the frame to conform to the safety. This approach results in a snug, rattle-free fit with no binding or pressure points.
Yes. The longer overall length at the bottom and optimized angle are designed to fill the gap between the mainspring housing and the safety, improving both fit and function.
The EGW Beavertail is a gunsmith-grade component machined from solid barstock to allow for precise custom fitting. Final fitting and installation should be performed by a qualified gunsmith to ensure proper function and safety.
