Loading...
Loading...
Loading...
Loading...
Brigand Arms
The Brigand Arms Edge Handguard in 12.375" combines featherweight woven carbon fiber construction with genuine free-float precision. If you're building a rifle that needs to shed pounds without sacrificing rigidity or rail real estate, this handguard delivers. The patented carbon fiber braid keeps weight down while the included aluminum barrel nut and jam nut let you mount it straight out of the box—no special tools or gunsmith visits required.
Free-float handguards are the backbone of accurate shooting, and this one starts you off on the right foot. The 12.375" length strikes a practical balance: long enough to clear most optics and offer mounting flexibility, short enough to keep your overall package manageable. The woven carbon fiber tube resists heat soak better than polymer and won't delaminate like cheaper alternatives.
Want to add lights, foregrips, or other rail-mounted gear? Brigand Arms sells 2.5" Picatinny rail segments separately—snap on as many or as few as your mission demands, each backed by a retention plate that keeps accessories locked down. That modular approach means you're not paying for rail real estate you won't use, and your rifle stays lighter as a result.
| Length | 12.375 inches |
| Material (Tube) | Woven Carbon Fiber (patented braid) |
| Material (Caps) | Aluminum |
| Float Type | Free Float |
| Barrel Nut | Standard (included with jam nut) |
Installation is straightforward—it comes complete with the barrel nut and jam nut you need and is designed for a standard AR-pattern build. As with any handguard swap, take your time torquing the barrel nut to spec and ensure your gas tube clears properly. If you're not comfortable working on your rifle, a gunsmith can install it in minutes.
The Edge Handguard itself is a smooth tube. Brigand Arms manufactures 2.5" Picatinny rail segments that you can mount to the handguard (sold separately). Each rail segment includes a backing plate to ensure secure attachment. You can add one segment or several, depending on your setup.
Yes. The patented carbon fiber braid is designed for field use and resists both heat and impact better than conventional polymer handguards. It won't delaminate or warp under heat like some cheaper alternatives, making it a solid choice for hard-use rifles.
The Edge Handguard uses a standard barrel nut, so it's compatible with any AR-pattern rifle that accepts standard Picatinny rail accessories. Always verify your specific platform before ordering.
Brigand Arms
The Brigand Arms Edge Handguard in 12.375" combines featherweight woven carbon fiber construction with genuine free-float precision. If you're building a rifle that needs to shed pounds without sacrificing rigidity or rail real estate, this handguard delivers. The patented carbon fiber braid keeps weight down while the included aluminum barrel nut and jam nut let you mount it straight out of the box—no special tools or gunsmith visits required.
Free-float handguards are the backbone of accurate shooting, and this one starts you off on the right foot. The 12.375" length strikes a practical balance: long enough to clear most optics and offer mounting flexibility, short enough to keep your overall package manageable. The woven carbon fiber tube resists heat soak better than polymer and won't delaminate like cheaper alternatives.
Want to add lights, foregrips, or other rail-mounted gear? Brigand Arms sells 2.5" Picatinny rail segments separately—snap on as many or as few as your mission demands, each backed by a retention plate that keeps accessories locked down. That modular approach means you're not paying for rail real estate you won't use, and your rifle stays lighter as a result.
| Length | 12.375 inches |
| Material (Tube) | Woven Carbon Fiber (patented braid) |
| Material (Caps) | Aluminum |
| Float Type | Free Float |
| Barrel Nut | Standard (included with jam nut) |
Installation is straightforward—it comes complete with the barrel nut and jam nut you need and is designed for a standard AR-pattern build. As with any handguard swap, take your time torquing the barrel nut to spec and ensure your gas tube clears properly. If you're not comfortable working on your rifle, a gunsmith can install it in minutes.
The Edge Handguard itself is a smooth tube. Brigand Arms manufactures 2.5" Picatinny rail segments that you can mount to the handguard (sold separately). Each rail segment includes a backing plate to ensure secure attachment. You can add one segment or several, depending on your setup.
Yes. The patented carbon fiber braid is designed for field use and resists both heat and impact better than conventional polymer handguards. It won't delaminate or warp under heat like some cheaper alternatives, making it a solid choice for hard-use rifles.
The Edge Handguard uses a standard barrel nut, so it's compatible with any AR-pattern rifle that accepts standard Picatinny rail accessories. Always verify your specific platform before ordering.
