Loading...
Loading...
Loading...
Loading...
Dead Air
The Dead Air Armament Wolverine Blast Shroud 7.62/30 Cal Hub Kit with WV200 Insert is a muzzle device designed to manage the concussion and flash signature of short-barreled rifles and pistol-caliber carbines. If you've ever shot an unsuppressed SBR and felt the concussion blast forward like a punch, or watched your shooting buddies wince at the muzzle rise and noise, this shroud tackles both problems by redirecting that energy away from you and your neighbors on the line. The kit includes the shroud body and the WV200 insert, giving you a complete solution out of the box.
Dead Air engineered this shroud to work within their modular ecosystem, so the components interchange with other Dead Air muzzle devices and suppressors. That means you can reconfigure and adapt the system as your setups change—grab a different hub, swap the insert, or integrate it with suppressor hardware you already own. The shroud mounts either directly via 1 1/8-28 threading or over an existing Dead Air muzzle device, so compatibility is flexible depending on your barrel and existing hardware.
Built from 4140HT steel for the shroud body and a mix of 4140HT steel and 17-4 stainless for the adapters, then finished in hard Black Nitride, this kit is built to handle the heat and punishment of repeated shooting. At 4.10 inches long and 12.6 ounces, it extends your muzzle signature—which on short barrels keeps your support hand further from the blast and reduces the risk of accidental contact with the muzzle devices.
Whether you're running a short-barrel precision rifle at the range, a PCC for 3-gun competition, or a home-defense SBR where your shooting partners matter as much as your accuracy, the Wolverine Blast Shroud addresses the real friction points: concussion fatigue, sight picture disruption from recoil, and the communal stress of shooting next to a short barrel.
| Shroud Material | 4140 HT Alloy Steel |
| Adapter Material | 4140HT Steel / 17-4 Stainless Steel |
| Finish | Black Nitride |
| Length | 4.10 inches |
| Weight | 12.6 ounces |
| Bore Diameter / Caliber | 7.62 / .30 Caliber |
| Thread Pitch | 1 1/8-28 |
The Wolverine Blast Shroud is engineered for 7.62/.30 caliber rifles and carbines with 1 1/8-28 threaded muzzles. It mounts directly to that thread pitch or over compatible Dead Air muzzle devices. Verify your barrel thread pitch and caliber before purchase.
Yes. The Wolverine Blast Shroud is part of Dead Air's modular system, and the hubs and components are interchangeable with other Dead Air suppressors and muzzle devices. This allows flexible configurations as your setup evolves.
The kit includes the Wolverine Blast Shroud body and the WV200 insert, so you have a complete, ready-to-use assembly.
At 4.10 inches, the shroud extends the muzzle signature further from your support hand, reducing the chance that your hand accidentally covers or contacts the muzzle devices during operation—a real concern on short-barrel rifles.
Dead Air
The Dead Air Armament Wolverine Blast Shroud 7.62/30 Cal Hub Kit with WV200 Insert is a muzzle device designed to manage the concussion and flash signature of short-barreled rifles and pistol-caliber carbines. If you've ever shot an unsuppressed SBR and felt the concussion blast forward like a punch, or watched your shooting buddies wince at the muzzle rise and noise, this shroud tackles both problems by redirecting that energy away from you and your neighbors on the line. The kit includes the shroud body and the WV200 insert, giving you a complete solution out of the box.
Dead Air engineered this shroud to work within their modular ecosystem, so the components interchange with other Dead Air muzzle devices and suppressors. That means you can reconfigure and adapt the system as your setups change—grab a different hub, swap the insert, or integrate it with suppressor hardware you already own. The shroud mounts either directly via 1 1/8-28 threading or over an existing Dead Air muzzle device, so compatibility is flexible depending on your barrel and existing hardware.
Built from 4140HT steel for the shroud body and a mix of 4140HT steel and 17-4 stainless for the adapters, then finished in hard Black Nitride, this kit is built to handle the heat and punishment of repeated shooting. At 4.10 inches long and 12.6 ounces, it extends your muzzle signature—which on short barrels keeps your support hand further from the blast and reduces the risk of accidental contact with the muzzle devices.
Whether you're running a short-barrel precision rifle at the range, a PCC for 3-gun competition, or a home-defense SBR where your shooting partners matter as much as your accuracy, the Wolverine Blast Shroud addresses the real friction points: concussion fatigue, sight picture disruption from recoil, and the communal stress of shooting next to a short barrel.
| Shroud Material | 4140 HT Alloy Steel |
| Adapter Material | 4140HT Steel / 17-4 Stainless Steel |
| Finish | Black Nitride |
| Length | 4.10 inches |
| Weight | 12.6 ounces |
| Bore Diameter / Caliber | 7.62 / .30 Caliber |
| Thread Pitch | 1 1/8-28 |
The Wolverine Blast Shroud is engineered for 7.62/.30 caliber rifles and carbines with 1 1/8-28 threaded muzzles. It mounts directly to that thread pitch or over compatible Dead Air muzzle devices. Verify your barrel thread pitch and caliber before purchase.
Yes. The Wolverine Blast Shroud is part of Dead Air's modular system, and the hubs and components are interchangeable with other Dead Air suppressors and muzzle devices. This allows flexible configurations as your setup evolves.
The kit includes the Wolverine Blast Shroud body and the WV200 insert, so you have a complete, ready-to-use assembly.
At 4.10 inches, the shroud extends the muzzle signature further from your support hand, reducing the chance that your hand accidentally covers or contacts the muzzle devices during operation—a real concern on short-barrel rifles.
