Loading...
Loading...
Loading...
Loading...
CMMG
The CMMG Zeroed 30 suppressor is a .30 caliber silencer built for shooters who want serious sound reduction without compromise. Whether you're running a .308 Winchester DMR, a subsonic 300 Blackout PDW, or a 7.62x39mm carbine, this 6.5-inch suppressor delivers the acoustic performance that .30 cal shooters expect from a full-auto-rated can. CMMG manufactures the Zeroed 30 entirely in-house, which means quality control is tight and the price stays honest—no middleman markup, no cost-cutting shortcuts.
Built from heat-treated 17-4 stainless steel with a nitride finish, the Zeroed 30 is tough enough for hard use and easy enough to maintain. The tubeless, laser-welded baffle design sheds fouling quickly, and the nitride surface resists corrosion whether you're cleaning with solvents or an ultrasonic tank. Two HUB-compatible direct-thread mounts ship in the box—a 1/2"-28 and a 5/8"-24—so you've got flexibility right out of the gate. If you want to switch to a quick-detach system down the road, the suppressor's 1.375"-24 HUB mount standard means you can swap platforms without buying a new can.
Assembly and disassembly require no special tools. The 3/8 square drive welded into the suppressor's end cap pairs with 7/8 wrench flats on the HUB mounts, so you can break it down or rebuild it with gear already in your toolbox. At 15.5 ounces with the mount or 13.5 ounces bare, it balances sound suppression with a manageable footprint on your rifle.
Before you buy, confirm your firearm's thread pitch and barrel length requirements. The Zeroed 30 works with everything from .22 ARC to 6.5 Creedmoor, but minimum barrel lengths vary by cartridge—300 Blackout wants at least 6.5 inches, while .308 Winchester needs 12.5 inches minimum.
| Caliber Compatibility | .22 ARC, .300 BLK, .308 WIN, 4.6x30mm, 5.56x45mm, 5.7x28mm, 6.5 Creedmoor, 6.5 Grendel, 6mm ARC, 7.62x39mm |
| Length | 6.5" (with mount); 6.2" (suppressor only) |
| Weight | 15.5 oz (with mount); 13.5 oz (suppressor only) |
| Diameter | 1.58" |
| Material | Heat-treated 17-4 stainless steel |
| Finish | Nitride |
| Bore Size | .30 caliber |
| Mount Type | Direct thread / HUB mount compatible (1.375"-24) |
| Included Mounts | 1/2"-28 direct thread HUB mount and 5/8"-24 direct thread HUB mount |
| Full-Auto Rated | Yes |
| Minimum Barrel Length | .300 BLK: 6.5"; .308 WIN: 12.5"; .300 PRC: 20" |
The suppressor ships with two direct-thread HUB mounts: one 1/2"-28 and one 5/8"-24. Before you order, confirm your rifle's muzzle thread pitch. If your rifle requires a different threading (like 5/8"-24 or 9/16"-24), you'll need to purchase the correct mount separately.
Yes. The Zeroed 30 is rated for .30 caliber and smaller centerfire cartridges, including .308 Winchester, .300 Blackout, 6.5 Creedmoor, 7.62x39mm, and many others. However, minimum barrel length requirements vary by cartridge—confirm your specific round's requirements before purchase.
Yes. The suppressor features a 1.375"-24 HUB mount standard, which is compatible with HUB-compatible quick-detach systems. The two included direct-thread mounts allow immediate use, and you can switch to a QD system in the future by purchasing a compatible HUB QD mount.
The tubeless, laser-welded baffle design is designed for easy maintenance. You can use nearly any solvent or an ultrasonic cleaner without concern. Disassembly requires only common hand tools—a wrench that fits the 7/8 wrench flats on the HUB mount and a 3/8 drive tool for the suppressor's end cap. No proprietary tools are needed.
CMMG
The CMMG Zeroed 30 suppressor is a .30 caliber silencer built for shooters who want serious sound reduction without compromise. Whether you're running a .308 Winchester DMR, a subsonic 300 Blackout PDW, or a 7.62x39mm carbine, this 6.5-inch suppressor delivers the acoustic performance that .30 cal shooters expect from a full-auto-rated can. CMMG manufactures the Zeroed 30 entirely in-house, which means quality control is tight and the price stays honest—no middleman markup, no cost-cutting shortcuts.
Built from heat-treated 17-4 stainless steel with a nitride finish, the Zeroed 30 is tough enough for hard use and easy enough to maintain. The tubeless, laser-welded baffle design sheds fouling quickly, and the nitride surface resists corrosion whether you're cleaning with solvents or an ultrasonic tank. Two HUB-compatible direct-thread mounts ship in the box—a 1/2"-28 and a 5/8"-24—so you've got flexibility right out of the gate. If you want to switch to a quick-detach system down the road, the suppressor's 1.375"-24 HUB mount standard means you can swap platforms without buying a new can.
Assembly and disassembly require no special tools. The 3/8 square drive welded into the suppressor's end cap pairs with 7/8 wrench flats on the HUB mounts, so you can break it down or rebuild it with gear already in your toolbox. At 15.5 ounces with the mount or 13.5 ounces bare, it balances sound suppression with a manageable footprint on your rifle.
Before you buy, confirm your firearm's thread pitch and barrel length requirements. The Zeroed 30 works with everything from .22 ARC to 6.5 Creedmoor, but minimum barrel lengths vary by cartridge—300 Blackout wants at least 6.5 inches, while .308 Winchester needs 12.5 inches minimum.
| Caliber Compatibility | .22 ARC, .300 BLK, .308 WIN, 4.6x30mm, 5.56x45mm, 5.7x28mm, 6.5 Creedmoor, 6.5 Grendel, 6mm ARC, 7.62x39mm |
| Length | 6.5" (with mount); 6.2" (suppressor only) |
| Weight | 15.5 oz (with mount); 13.5 oz (suppressor only) |
| Diameter | 1.58" |
| Material | Heat-treated 17-4 stainless steel |
| Finish | Nitride |
| Bore Size | .30 caliber |
| Mount Type | Direct thread / HUB mount compatible (1.375"-24) |
| Included Mounts | 1/2"-28 direct thread HUB mount and 5/8"-24 direct thread HUB mount |
| Full-Auto Rated | Yes |
| Minimum Barrel Length | .300 BLK: 6.5"; .308 WIN: 12.5"; .300 PRC: 20" |
The suppressor ships with two direct-thread HUB mounts: one 1/2"-28 and one 5/8"-24. Before you order, confirm your rifle's muzzle thread pitch. If your rifle requires a different threading (like 5/8"-24 or 9/16"-24), you'll need to purchase the correct mount separately.
Yes. The Zeroed 30 is rated for .30 caliber and smaller centerfire cartridges, including .308 Winchester, .300 Blackout, 6.5 Creedmoor, 7.62x39mm, and many others. However, minimum barrel length requirements vary by cartridge—confirm your specific round's requirements before purchase.
Yes. The suppressor features a 1.375"-24 HUB mount standard, which is compatible with HUB-compatible quick-detach systems. The two included direct-thread mounts allow immediate use, and you can switch to a QD system in the future by purchasing a compatible HUB QD mount.
The tubeless, laser-welded baffle design is designed for easy maintenance. You can use nearly any solvent or an ultrasonic cleaner without concern. Disassembly requires only common hand tools—a wrench that fits the 7/8 wrench flats on the HUB mount and a 3/8 drive tool for the suppressor's end cap. No proprietary tools are needed.
