Loading...
Loading...
Loading...
Loading...
CMMG
The CMMG Suppressor Zeroed 22 Kit is a modular rimfire suppressor system that gives you two configurations in one .22 LR suppressor—full-size for maximum sound reduction or compact K-size for pistols and shorter rifles. Built for shooters who want flexibility without buying multiple cans or dealing with extra tax stamps, this direct-thread suppressor trades the guesswork of choosing between length and performance for genuine adaptability.
The Zeroed 22 Plus arrives with both a standard-length ZEROED 22 tube and an additional K-size outer tube, letting you swap configurations in minutes. Need peak suppression on a rifle? Run the full-length setup. Switching to a .22 handgun? Swap the tube, remove two baffles, and reassemble with the K configuration. The removable baffle stack and end caps make field cleaning straightforward—no need to send it off every time you want to maintain it. Baffle indexing marks ensure you reassemble correctly for consistent performance, and the 1/4" hex front cap lets you disassemble without struggling against fouled threads.
Rated for full-auto .22 LR and semi-auto .17 HMR/.22 Mag, the suppressor features a 17-4 stainless steel baffle stack, 6061-T6 aluminum tube, and a 4140 steel rear mount for durability. At 4.8–5.6 oz and 1" diameter, it handles like a rimfire can should—lightweight and unobtrusive. The 1/2×28 direct-thread mount fits the majority of .22 LR firearms, though you'll want to verify your specific gun's muzzle threading before ordering.
| Caliber | .22 LR (full-auto rated); .17 HMR / .22 Mag (semi-auto) |
| Muzzle Thread | 1/2" × 28 (direct thread) |
| Length | 4.5"–5.5" (depending on configuration) |
| Diameter | 1" |
| Weight | 4.8–5.6 oz |
| Material | Baffle stack: 17-4 stainless steel; Tube and front cap: 6061-T6 aluminum; Rear mount: 4140 steel |
| Finish | Hard coat anodized |
| HUB Compatible | No |
| Attachment Type | Direct thread |
Yes, as long as your firearm has a 1/2"×28 threaded muzzle or adapter. The Zeroed 22 Plus is rated full-auto for .22 LR across both configurations. However, always verify your gun's thread pitch before purchase—if it requires a different threading, you'll need a separate adapter.
The Zeroed 22 Plus comes with one standard-length ZEROED 22 suppressor tube and one additional K-size outer tube. You can swap between them and adjust the baffle stack to configure the suppressor as either full-length or compact. Both configurations use the same serial number and tax stamp.
Yes. The removable front and rear end caps and the baffle stack allow you to disassemble the suppressor for thorough cleaning and maintenance. The 1/4" hex front cap lets you use a hex wrench or bit to assist with removal, which is especially helpful if carbon has built up on the threads.
It is rated for semi-auto only in .17 HMR and .22 Mag, meaning those calibers cannot be used in full-auto firearms. The suppressor is full-auto rated only for .22 LR.
CMMG
The CMMG Suppressor Zeroed 22 Kit is a modular rimfire suppressor system that gives you two configurations in one .22 LR suppressor—full-size for maximum sound reduction or compact K-size for pistols and shorter rifles. Built for shooters who want flexibility without buying multiple cans or dealing with extra tax stamps, this direct-thread suppressor trades the guesswork of choosing between length and performance for genuine adaptability.
The Zeroed 22 Plus arrives with both a standard-length ZEROED 22 tube and an additional K-size outer tube, letting you swap configurations in minutes. Need peak suppression on a rifle? Run the full-length setup. Switching to a .22 handgun? Swap the tube, remove two baffles, and reassemble with the K configuration. The removable baffle stack and end caps make field cleaning straightforward—no need to send it off every time you want to maintain it. Baffle indexing marks ensure you reassemble correctly for consistent performance, and the 1/4" hex front cap lets you disassemble without struggling against fouled threads.
Rated for full-auto .22 LR and semi-auto .17 HMR/.22 Mag, the suppressor features a 17-4 stainless steel baffle stack, 6061-T6 aluminum tube, and a 4140 steel rear mount for durability. At 4.8–5.6 oz and 1" diameter, it handles like a rimfire can should—lightweight and unobtrusive. The 1/2×28 direct-thread mount fits the majority of .22 LR firearms, though you'll want to verify your specific gun's muzzle threading before ordering.
| Caliber | .22 LR (full-auto rated); .17 HMR / .22 Mag (semi-auto) |
| Muzzle Thread | 1/2" × 28 (direct thread) |
| Length | 4.5"–5.5" (depending on configuration) |
| Diameter | 1" |
| Weight | 4.8–5.6 oz |
| Material | Baffle stack: 17-4 stainless steel; Tube and front cap: 6061-T6 aluminum; Rear mount: 4140 steel |
| Finish | Hard coat anodized |
| HUB Compatible | No |
| Attachment Type | Direct thread |
Yes, as long as your firearm has a 1/2"×28 threaded muzzle or adapter. The Zeroed 22 Plus is rated full-auto for .22 LR across both configurations. However, always verify your gun's thread pitch before purchase—if it requires a different threading, you'll need a separate adapter.
The Zeroed 22 Plus comes with one standard-length ZEROED 22 suppressor tube and one additional K-size outer tube. You can swap between them and adjust the baffle stack to configure the suppressor as either full-length or compact. Both configurations use the same serial number and tax stamp.
Yes. The removable front and rear end caps and the baffle stack allow you to disassemble the suppressor for thorough cleaning and maintenance. The 1/4" hex front cap lets you use a hex wrench or bit to assist with removal, which is especially helpful if carbon has built up on the threads.
It is rated for semi-auto only in .17 HMR and .22 Mag, meaning those calibers cannot be used in full-auto firearms. The suppressor is full-auto rated only for .22 LR.
