Loading...
Loading...
Loading...
Loading...
Area 419
The Area 419 Zero S-Series 6.5 Creedmoor sizing die brings precision reloading to the standard 7/8" die format without the premium M-Series price tag. Built for shooters who demand consistency shot after shot, this full-length neck-to-extractor sizing die uses Area 419's proven engineering to eliminate the sticky bolt and sizing frustration that plagues lesser dies. Whether you're loading match ammo for the range or precision hunting rounds in 6.5 CM, the ZERO S-Series gives you the control and repeatability that separates good loads from great ones.
The die ships with a .002" neck tension mandrel—your baseline for clean, concentric sizing—and you can add more mandrel increments to dial in your exact tension preferences. The precision-ground expander mandrel is the heart of the system, ensuring your brass shoulders and necks size true, not just close enough. A spring-loaded ejection system punches out spent primers automatically, and the replaceable steel decap pins handle the repetitive work without wearing out your die. The reamer is cut to exacting specs for genuine full-length sizing, not a compromise cut.
Hydraulic shoulder pressure relief protects your press and brass from over-force sizing, while the entire die is manufactured in America. The package includes an Area 419 ZERO Universal Die Ring, a spare decapping pin, and the install and removal tools you need—just bring your own 6.5 CM shellholder (compatible with Redding, Hornady, RCBS, and Area 419's modular system). This is serious reloading gear for shooters who know the difference precision brass makes.
| Caliber | 6.5 Creedmoor |
| Die Type | Full-Length Sizing Die |
| Die Size | 7/8" |
| Series | ZERO S-Series |
| Included Mandrel Tension | .002" |
| Country of Origin | USA |
| What's Included | Die, ZERO Universal Die Ring, spare decapping pin, install/removal tools |
Yes. The die itself does not come with a shellholder, but it is compatible with standard shellholders from Redding, Hornady, RCBS, and others. It also works with Area 419's ZERO Modular Shellholder System if you prefer that route.
All ZERO S-Series dies ship with a .002" neck tension mandrel. If you want to run different tension increments, Area 419 offers a separate mandrel kit to stack additional mandrels for your specific load tuning.
The decapping pin is replaceable steel, so you can swap in a fresh pin without replacing the entire die. Area 419 includes a spare pin with the die, and additional pins are available separately.
The ZERO S-Series is a standard 7/8" die, so it will fit any reloading press with a standard 7/8" die station. Consult your press manual or manufacturer for compatibility details specific to your equipment.
Area 419
The Area 419 Zero S-Series 6.5 Creedmoor sizing die brings precision reloading to the standard 7/8" die format without the premium M-Series price tag. Built for shooters who demand consistency shot after shot, this full-length neck-to-extractor sizing die uses Area 419's proven engineering to eliminate the sticky bolt and sizing frustration that plagues lesser dies. Whether you're loading match ammo for the range or precision hunting rounds in 6.5 CM, the ZERO S-Series gives you the control and repeatability that separates good loads from great ones.
The die ships with a .002" neck tension mandrel—your baseline for clean, concentric sizing—and you can add more mandrel increments to dial in your exact tension preferences. The precision-ground expander mandrel is the heart of the system, ensuring your brass shoulders and necks size true, not just close enough. A spring-loaded ejection system punches out spent primers automatically, and the replaceable steel decap pins handle the repetitive work without wearing out your die. The reamer is cut to exacting specs for genuine full-length sizing, not a compromise cut.
Hydraulic shoulder pressure relief protects your press and brass from over-force sizing, while the entire die is manufactured in America. The package includes an Area 419 ZERO Universal Die Ring, a spare decapping pin, and the install and removal tools you need—just bring your own 6.5 CM shellholder (compatible with Redding, Hornady, RCBS, and Area 419's modular system). This is serious reloading gear for shooters who know the difference precision brass makes.
| Caliber | 6.5 Creedmoor |
| Die Type | Full-Length Sizing Die |
| Die Size | 7/8" |
| Series | ZERO S-Series |
| Included Mandrel Tension | .002" |
| Country of Origin | USA |
| What's Included | Die, ZERO Universal Die Ring, spare decapping pin, install/removal tools |
Yes. The die itself does not come with a shellholder, but it is compatible with standard shellholders from Redding, Hornady, RCBS, and others. It also works with Area 419's ZERO Modular Shellholder System if you prefer that route.
All ZERO S-Series dies ship with a .002" neck tension mandrel. If you want to run different tension increments, Area 419 offers a separate mandrel kit to stack additional mandrels for your specific load tuning.
The decapping pin is replaceable steel, so you can swap in a fresh pin without replacing the entire die. Area 419 includes a spare pin with the die, and additional pins are available separately.
The ZERO S-Series is a standard 7/8" die, so it will fit any reloading press with a standard 7/8" die station. Consult your press manual or manufacturer for compatibility details specific to your equipment.
