Loading...
Loading...
Loading...
Loading...
Area 419
The Area 419 Zero S-Series 308 Winchester sizing die brings proven precision engineering to traditional 7/8" die form. Built on the reputation of Area 419's M-Series platform, this 308 sizing die delivers the accuracy and reliability serious handloaders expect without the premium price tag. Whether you're fine-tuning match ammunition or working up hunting loads, the ZERO S-Series addresses the core frustrations of conventional sizing: inconsistent neck tension, sticky bolt lift on resized brass, and marginal decapping reliability.
The die ships with a precision ground expander mandrel set for .002" neck tension, giving you a clean starting point that you can adjust via additional mandrel kits if your loads or brass lot demands it. The reamer is cut to exacting tolerances specifically to achieve true sizing geometry—no more fighting a sticky bolt after the second or third firing cycle. A hydraulic shoulder pressure relief system manages the forces during sizing, protecting your brass and extending die life. Spring ejection helps spent primers clear the die reliably, and the replaceable steel decapping pin means you're not locked into expensive proprietary parts when wear happens.
Area 419 backs this die with American manufacturing and supplies it with a ZERO Universal Die Ring, a spare decapping pin, and the tools you need to install and remove it from your press. Note that the die body alone is sold here—you'll need a standard shellholder (Redding, Hornady, RCBS, or Area 419 modular) to set it up in your loading press. If you already have one on hand, you're ready to load. If not, any common shellholder for 308 Winchester will work.
| Product | Area 419 Zero S-Series Sizing Die |
| Caliber | 308 Winchester |
| Die Type | Full-Length Neck to Extractor Sizing |
| Die Size | 7/8" |
| Expander Mandrel | Precision ground, .002" neck tension standard |
| Decapping | Replaceable steel pin |
| Made In | USA |
| Included Accessories | Universal Die Ring, spare decapping pin, installation/removal tools |
| Shellholder | Not included; compatible with standard 308 Winchester shellholders |
Yes, you'll need a separate shellholder—it's not included with the die body. The ZERO S-Series is compatible with standard 308 Winchester shellholders from Redding, Hornady, RCBS, and Area 419's modular shellholder system. If you already own one that fits your press, you can use it immediately.
The die ships with a .002" neck tension expander mandrel, which is a solid baseline for most 308 loads. If you want to adjust neck tension for a specific brass lot or load, Area 419 offers additional mandrel increments available as a separate mandrel kit.
The reamer is cut to precise dimensions that achieve true sizing geometry, eliminating the sticky bolt lift that often occurs after a couple of firing cycles. The hydraulic shoulder pressure relief manages sizing forces to protect brass, and the spring ejection system reliably ejects spent primers. The replaceable steel decapping pin also means you're not locked into proprietary parts when maintenance is needed.
Yes. The ZERO S-Series uses a standard replaceable steel decapping pin. A spare is included with the die, and replacements are straightforward to source and install without specialized tools or die-specific components.
Area 419
The Area 419 Zero S-Series 308 Winchester sizing die brings proven precision engineering to traditional 7/8" die form. Built on the reputation of Area 419's M-Series platform, this 308 sizing die delivers the accuracy and reliability serious handloaders expect without the premium price tag. Whether you're fine-tuning match ammunition or working up hunting loads, the ZERO S-Series addresses the core frustrations of conventional sizing: inconsistent neck tension, sticky bolt lift on resized brass, and marginal decapping reliability.
The die ships with a precision ground expander mandrel set for .002" neck tension, giving you a clean starting point that you can adjust via additional mandrel kits if your loads or brass lot demands it. The reamer is cut to exacting tolerances specifically to achieve true sizing geometry—no more fighting a sticky bolt after the second or third firing cycle. A hydraulic shoulder pressure relief system manages the forces during sizing, protecting your brass and extending die life. Spring ejection helps spent primers clear the die reliably, and the replaceable steel decapping pin means you're not locked into expensive proprietary parts when wear happens.
Area 419 backs this die with American manufacturing and supplies it with a ZERO Universal Die Ring, a spare decapping pin, and the tools you need to install and remove it from your press. Note that the die body alone is sold here—you'll need a standard shellholder (Redding, Hornady, RCBS, or Area 419 modular) to set it up in your loading press. If you already have one on hand, you're ready to load. If not, any common shellholder for 308 Winchester will work.
| Product | Area 419 Zero S-Series Sizing Die |
| Caliber | 308 Winchester |
| Die Type | Full-Length Neck to Extractor Sizing |
| Die Size | 7/8" |
| Expander Mandrel | Precision ground, .002" neck tension standard |
| Decapping | Replaceable steel pin |
| Made In | USA |
| Included Accessories | Universal Die Ring, spare decapping pin, installation/removal tools |
| Shellholder | Not included; compatible with standard 308 Winchester shellholders |
Yes, you'll need a separate shellholder—it's not included with the die body. The ZERO S-Series is compatible with standard 308 Winchester shellholders from Redding, Hornady, RCBS, and Area 419's modular shellholder system. If you already own one that fits your press, you can use it immediately.
The die ships with a .002" neck tension expander mandrel, which is a solid baseline for most 308 loads. If you want to adjust neck tension for a specific brass lot or load, Area 419 offers additional mandrel increments available as a separate mandrel kit.
The reamer is cut to precise dimensions that achieve true sizing geometry, eliminating the sticky bolt lift that often occurs after a couple of firing cycles. The hydraulic shoulder pressure relief manages sizing forces to protect brass, and the spring ejection system reliably ejects spent primers. The replaceable steel decapping pin also means you're not locked into proprietary parts when maintenance is needed.
Yes. The ZERO S-Series uses a standard replaceable steel decapping pin. A spare is included with the die, and replacements are straightforward to source and install without specialized tools or die-specific components.
