American Rifle Company 34Mm 1.50'' 20 Moa Scope Mount BlackAmerican Rifle Company$299.00
Loading...
Loading...
Loading...
Loading...
American Rifle Company
The American Rifle Company 34mm 1.50" 10 MOA scope mount in black is a precision-engineered mounting system built for shooters who demand rock-solid optic placement without compromise. Unlike generic scope rings churned out by the dozen, ARC's M-BRACE represents years of refinement—a purpose-built platform that evolved from their proven M10 rings trusted by thousands of riflemen over more than a decade. If you're setting up a dedicated hunting rifle, precision target gun, or long-range shooter, this mount delivers the repeatability and durability that separate field-ready builds from those that fail when it matters.
The 34mm tube diameter and 1.50" height are engineered to clear modern rail systems and bolt handles on actions with 90-degree bolt rotation, though final positioning on your picatinny rail may need adjustment depending on your specific action geometry. The 10 MOA elevation built into the mount helps optimize your sight picture for long-range or mid-range work, reducing the need for additional shimming or rail angles. Torque specifications (6.2 Nm on clamp and rail screws; 3.4 Nm on bubble level screw) ensure you can properly secure your optic without guesswork—critical for consistency shot after shot.
This isn't a budget compromise or a convenient quick-fix. It's a serious component for serious shooters: those who zero once and trust the result, who expect their gear to stay put through recoil and field use, and who understand that a rigid scope mount is the foundation of any accurate rifle setup.
| Tube Diameter | 34mm |
| Mount Height | 1.50" |
| Built-in Elevation | 10 MOA |
| Rail Interface | Picatinny |
| Clamp/Rail Torque Spec | 6.2 Nm (55 in-lbs) |
| Level Screw Torque Spec | 3.4 Nm (30 in-lbs) |
| Finish | Black anodized |
The M-BRACE is designed for picatinny rail systems. If your action uses 90-degree bolt rotation, the 1.50" height may cause bolt handle interference when the mount is installed at the aft recoil slot. In that case, simply move the mount forward one picatinny slot—this adjustment resolves the issue for most shooters without sacrificing mounting security.
This is a 34mm scope mount, designed for optics with a 34mm main tube diameter. Verify your optic's tube size before purchase; it will not fit 30mm, 1-inch, or 35mm tubes.
Use 6.2 Nm (55 in-lbs) for the scope clamp and rail mount screws, and 3.4 Nm (30 in-lbs) for the bubble level screw. Proper torque is essential for repeatability and longevity—don't guess or over-tighten.
No. This is a scope mount only. You will need to supply a 34mm tube optic and install it yourself or have a gunsmith perform the installation.
American Rifle Company
The American Rifle Company 34mm 1.50" 10 MOA scope mount in black is a precision-engineered mounting system built for shooters who demand rock-solid optic placement without compromise. Unlike generic scope rings churned out by the dozen, ARC's M-BRACE represents years of refinement—a purpose-built platform that evolved from their proven M10 rings trusted by thousands of riflemen over more than a decade. If you're setting up a dedicated hunting rifle, precision target gun, or long-range shooter, this mount delivers the repeatability and durability that separate field-ready builds from those that fail when it matters.
The 34mm tube diameter and 1.50" height are engineered to clear modern rail systems and bolt handles on actions with 90-degree bolt rotation, though final positioning on your picatinny rail may need adjustment depending on your specific action geometry. The 10 MOA elevation built into the mount helps optimize your sight picture for long-range or mid-range work, reducing the need for additional shimming or rail angles. Torque specifications (6.2 Nm on clamp and rail screws; 3.4 Nm on bubble level screw) ensure you can properly secure your optic without guesswork—critical for consistency shot after shot.
This isn't a budget compromise or a convenient quick-fix. It's a serious component for serious shooters: those who zero once and trust the result, who expect their gear to stay put through recoil and field use, and who understand that a rigid scope mount is the foundation of any accurate rifle setup.
| Tube Diameter | 34mm |
| Mount Height | 1.50" |
| Built-in Elevation | 10 MOA |
| Rail Interface | Picatinny |
| Clamp/Rail Torque Spec | 6.2 Nm (55 in-lbs) |
| Level Screw Torque Spec | 3.4 Nm (30 in-lbs) |
| Finish | Black anodized |
The M-BRACE is designed for picatinny rail systems. If your action uses 90-degree bolt rotation, the 1.50" height may cause bolt handle interference when the mount is installed at the aft recoil slot. In that case, simply move the mount forward one picatinny slot—this adjustment resolves the issue for most shooters without sacrificing mounting security.
This is a 34mm scope mount, designed for optics with a 34mm main tube diameter. Verify your optic's tube size before purchase; it will not fit 30mm, 1-inch, or 35mm tubes.
Use 6.2 Nm (55 in-lbs) for the scope clamp and rail mount screws, and 3.4 Nm (30 in-lbs) for the bubble level screw. Proper torque is essential for repeatability and longevity—don't guess or over-tighten.
No. This is a scope mount only. You will need to supply a 34mm tube optic and install it yourself or have a gunsmith perform the installation.
