American Rifle Company 34Mm 1.26'' 20 Moa Scope Mount BlackAmerican Rifle Company$299.00
Loading...
Loading...
Loading...
Loading...
American Rifle Company
The American Rifle Company 34mm 1.26" 30 MOA scope mount is a purpose-built ring and base system designed for shooters who demand precision and reliability on high-performance rifles. Built on decades of field-tested design principles from ARC's legacy M10 rings, the M-BRACE mounting system represents a thoughtful evolution in scope mounting technology—engineered from the ground up rather than adapted from generic designs. This 34mm scope mount handles the demands of long-range hunting, competition shooting, and precision rifle work where an unwavering sight picture matters.
The 30 MOA cant integrated into this mount makes it an excellent choice for shooters building rifles optimized for extended-distance shooting. By pre-angling the optic, you preserve more of your turret adjustment range for elevation changes downrange, a critical advantage when dialing for extreme distances or shooting in challenging terrain. The 1.26" mounting height positions your scope at a standard cheek-weld distance suitable for most rifle stocks and configurations.
ARC's attention to detail extends to the hardware specifications: the scope clamp and rail mount screws torque to 6.2 Nm (55 in-lbs), while the bubble level screw tops out at 3.4 Nm (30 in-lbs). One important note for builders with short-action rifles featuring 90-degree bolt rotation: mounting this system in the far aft recoil slot on a picatinny rail may cause the bolt handle to contact the serrated interface block when opened. This is easily avoided by moving the mount forward one slot, giving you flexibility in setup without compromising the engineering.
If you're assembling a rifle where every component counts—whether you're pushing distance at the range or hunting where your first shot has to count—the American Rifle Company 34mm scope mount delivers the kind of solid, repeatable platform that separates a rifle you trust from one you merely tolerate.
| Scope Ring Diameter | 34mm |
| Mounting Height | 1.26" |
| MOA Cant | 30 MOA |
| Interface Type | Picatinny rail |
| Scope Clamp/Rail Torque | 6.2 Nm (55 in-lbs) |
| Bubble Level Screw Torque | 3.4 Nm (30 in-lbs) |
| Finish | Black |
Yes, but placement matters. The 32mm height M-BRACE can interfere with the bolt handle when mounted in the far aft recoil slot. Simply move the mount forward one slot on the picatinny rail and the issue is resolved. This flexibility is one of the advantages of the system.
The American Rifle Company 34mm mount is designed for 34mm objective lenses, common on modern hunting and long-range optics. Make sure your scope tube diameter matches before purchasing.
The 30 MOA cant pre-angles your scope for long-range elevation shooting, preserving more of your scope's turret adjustment range for dialing distance. This is especially useful on precision rifles built for extended-range work.
Torque the scope clamp and rail mount screws to 6.2 Nm (55 in-lbs). Torque the bubble level screw to 3.4 Nm (30 in-lbs). Using a torque wrench prevents over-tightening, which can damage threads and optics.
American Rifle Company
The American Rifle Company 34mm 1.26" 30 MOA scope mount is a purpose-built ring and base system designed for shooters who demand precision and reliability on high-performance rifles. Built on decades of field-tested design principles from ARC's legacy M10 rings, the M-BRACE mounting system represents a thoughtful evolution in scope mounting technology—engineered from the ground up rather than adapted from generic designs. This 34mm scope mount handles the demands of long-range hunting, competition shooting, and precision rifle work where an unwavering sight picture matters.
The 30 MOA cant integrated into this mount makes it an excellent choice for shooters building rifles optimized for extended-distance shooting. By pre-angling the optic, you preserve more of your turret adjustment range for elevation changes downrange, a critical advantage when dialing for extreme distances or shooting in challenging terrain. The 1.26" mounting height positions your scope at a standard cheek-weld distance suitable for most rifle stocks and configurations.
ARC's attention to detail extends to the hardware specifications: the scope clamp and rail mount screws torque to 6.2 Nm (55 in-lbs), while the bubble level screw tops out at 3.4 Nm (30 in-lbs). One important note for builders with short-action rifles featuring 90-degree bolt rotation: mounting this system in the far aft recoil slot on a picatinny rail may cause the bolt handle to contact the serrated interface block when opened. This is easily avoided by moving the mount forward one slot, giving you flexibility in setup without compromising the engineering.
If you're assembling a rifle where every component counts—whether you're pushing distance at the range or hunting where your first shot has to count—the American Rifle Company 34mm scope mount delivers the kind of solid, repeatable platform that separates a rifle you trust from one you merely tolerate.
| Scope Ring Diameter | 34mm |
| Mounting Height | 1.26" |
| MOA Cant | 30 MOA |
| Interface Type | Picatinny rail |
| Scope Clamp/Rail Torque | 6.2 Nm (55 in-lbs) |
| Bubble Level Screw Torque | 3.4 Nm (30 in-lbs) |
| Finish | Black |
Yes, but placement matters. The 32mm height M-BRACE can interfere with the bolt handle when mounted in the far aft recoil slot. Simply move the mount forward one slot on the picatinny rail and the issue is resolved. This flexibility is one of the advantages of the system.
The American Rifle Company 34mm mount is designed for 34mm objective lenses, common on modern hunting and long-range optics. Make sure your scope tube diameter matches before purchasing.
The 30 MOA cant pre-angles your scope for long-range elevation shooting, preserving more of your scope's turret adjustment range for dialing distance. This is especially useful on precision rifles built for extended-range work.
Torque the scope clamp and rail mount screws to 6.2 Nm (55 in-lbs). Torque the bubble level screw to 3.4 Nm (30 in-lbs). Using a torque wrench prevents over-tightening, which can damage threads and optics.
