Loading...
Loading...
Loading...
Loading...
Yankee Hill Machine
The Yankee Hill Machine 6" Rod Kit for VICTRA-12 gives you a straightforward way to reconfigure your modular shotgun suppressor to a shorter profile. These assembly rods hold the baffle stack together and are the key component for swapping your VICTRA-12 between its various length configurations—6", 8", 10", and the full 12" setup. If you run a 6" suppressor setup or plan to experiment with shorter barrel lengths for different shooting scenarios, this rod kit is what you need to make that happen.
Built from 17-4 stainless steel with a natural finish, these rods are built to last through countless reconfiguration cycles and field use. The kit comes as a pair, so you have a matched set ready to go. Whether you're tuning your shotgun suppressor for close-range hunting, home defense, or range testing different configurations, having dedicated rod sets on hand means you can swap lengths without hunting for replacements.
Yankee Hill Machine has engineered the VICTRA-12 system around modular flexibility, and that starts with solid, repeatable hardware. These rods are the backbone of that modularity—simple, reliable, and designed to do one job well.
| Length | 6" |
| Diameter | .1875" |
| Material | 17-4 Stainless Steel |
| Finish | Natural Stainless |
| Overall Length (OAL) | 6.4" |
| Weight | 13.5 oz |
| Quantity | Pair (2 rods) |
These rods are assembly components for the Yankee Hill Machine VICTRA-12 modular shotgun suppressor.
Yes. The VICTRA-12 is designed to be reconfigured to different lengths—6", 8", 10", and 12"—and these rods are the assembly hardware that holds the baffle stack together for any of those configurations.
The kit is sold as a pair (2 rods).
They are made from 17-4 stainless steel with a natural stainless finish, designed to withstand repeated use and resist corrosion.
Yankee Hill Machine
The Yankee Hill Machine 6" Rod Kit for VICTRA-12 gives you a straightforward way to reconfigure your modular shotgun suppressor to a shorter profile. These assembly rods hold the baffle stack together and are the key component for swapping your VICTRA-12 between its various length configurations—6", 8", 10", and the full 12" setup. If you run a 6" suppressor setup or plan to experiment with shorter barrel lengths for different shooting scenarios, this rod kit is what you need to make that happen.
Built from 17-4 stainless steel with a natural finish, these rods are built to last through countless reconfiguration cycles and field use. The kit comes as a pair, so you have a matched set ready to go. Whether you're tuning your shotgun suppressor for close-range hunting, home defense, or range testing different configurations, having dedicated rod sets on hand means you can swap lengths without hunting for replacements.
Yankee Hill Machine has engineered the VICTRA-12 system around modular flexibility, and that starts with solid, repeatable hardware. These rods are the backbone of that modularity—simple, reliable, and designed to do one job well.
| Length | 6" |
| Diameter | .1875" |
| Material | 17-4 Stainless Steel |
| Finish | Natural Stainless |
| Overall Length (OAL) | 6.4" |
| Weight | 13.5 oz |
| Quantity | Pair (2 rods) |
These rods are assembly components for the Yankee Hill Machine VICTRA-12 modular shotgun suppressor.
Yes. The VICTRA-12 is designed to be reconfigured to different lengths—6", 8", 10", and 12"—and these rods are the assembly hardware that holds the baffle stack together for any of those configurations.
The kit is sold as a pair (2 rods).
They are made from 17-4 stainless steel with a natural stainless finish, designed to withstand repeated use and resist corrosion.
