Loading...
Loading...
Loading...
Loading...
Yankee Hill Machine
The Yankee Hill Machine Victra-20 shotgun suppressor is purpose-built for 20-gauge hunters, sport shooters, and home-defense users who want serious sound reduction without the bulk. Unlike one-size-fits-all designs, the Victra-20's modular construction lets you dial in the exact configuration you need—full 10-inch length for maximum suppression, or quick-swap down to 8, 6, or 4 inches for better handling and balance on your particular shotgun and shooting situation.
Built from aerospace-grade 7075 aluminum and 17-4 stainless steel with hard anodize and Melonite finishes, the Victra-20 is engineered to handle the pressure and heat of shotgun patterns. The suppressor threads onto your shotgun's factory choke tubes using Yankee Hill's proprietary mount system; the choke stays in the suppressor itself, so you're not giving up your gun's factory threading or choke selection. In its full 10-inch configuration, the Victra-20 reduces most commercial shotgun loads to an average of 132 dB at the shooter's ear—a meaningful reduction that also drops felt recoil so you can stay on target shot after shot.
Every Victra-20 ships with two 10-inch assembly rods, an Improved Cylinder choke, and two multi-use wrenches to get you running. If you want to experiment with shorter configurations, additional rod kits are available separately. Made in the USA, the Victra-20 is a serious choice for anyone running a 20-gauge who's tired of hearing it ring in the truck on the drive home.
| Gauge | 20 |
| Maximum Shell Length | 3.5 inches |
| Weight (10-inch config) | 22 oz |
| Weight (4-inch config) | 12 oz |
| Length Range (modular) | 4.4 to 10.4 inches OAL |
| Diameter | 1.95 inches |
| Height | 2.7 inches |
| Decibel Rating (10-inch) | 132 dB average at shooter's ear |
| Decibel Rating (4-inch) | 138 dB average at shooter's ear |
| Construction | 7075 Aluminum and 17-4 PH Stainless Steel |
| Finish | Hard Anodize and Melonite |
| Mount Type | YHM mount on factory choke threads |
| Country of Origin | Made in the USA |
The Victra-20 mounts via your shotgun's factory choke threads using Yankee Hill's VICTRA mount system. As long as your 20-gauge shotgun has removable choke tubes, the Victra-20 will thread on. It handles 3.5-inch shells, so it works with any modern 20-gauge that supports that length.
Each suppressor includes two 10-inch assembly rods, an Improved Cylinder choke, and two multi-use wrenches. You'll need a 5/32 Allen wrench (not included) for disassembly and reassembly. Additional rod kits to create 8, 6, and 4-inch configurations are sold separately.
The full 10-inch configuration averages 132 dB at the shooter's ear, while the 4-inch configuration averages 138 dB—a 6 dB increase in noise level. The 4-inch version also saves 10 ounces of weight, which many shooters prefer for balance and handling, even if they trade a bit of sound suppression.
Yes—that's the whole idea behind the modular design. You can swap rods and reconfigure the suppressor from 10 inches down to 8, 6, or 4 inches depending on your needs. You'll need a 5/32 Allen wrench and the appropriate additional rod kits, which are available separately.
Yankee Hill Machine
The Yankee Hill Machine Victra-20 shotgun suppressor is purpose-built for 20-gauge hunters, sport shooters, and home-defense users who want serious sound reduction without the bulk. Unlike one-size-fits-all designs, the Victra-20's modular construction lets you dial in the exact configuration you need—full 10-inch length for maximum suppression, or quick-swap down to 8, 6, or 4 inches for better handling and balance on your particular shotgun and shooting situation.
Built from aerospace-grade 7075 aluminum and 17-4 stainless steel with hard anodize and Melonite finishes, the Victra-20 is engineered to handle the pressure and heat of shotgun patterns. The suppressor threads onto your shotgun's factory choke tubes using Yankee Hill's proprietary mount system; the choke stays in the suppressor itself, so you're not giving up your gun's factory threading or choke selection. In its full 10-inch configuration, the Victra-20 reduces most commercial shotgun loads to an average of 132 dB at the shooter's ear—a meaningful reduction that also drops felt recoil so you can stay on target shot after shot.
Every Victra-20 ships with two 10-inch assembly rods, an Improved Cylinder choke, and two multi-use wrenches to get you running. If you want to experiment with shorter configurations, additional rod kits are available separately. Made in the USA, the Victra-20 is a serious choice for anyone running a 20-gauge who's tired of hearing it ring in the truck on the drive home.
| Gauge | 20 |
| Maximum Shell Length | 3.5 inches |
| Weight (10-inch config) | 22 oz |
| Weight (4-inch config) | 12 oz |
| Length Range (modular) | 4.4 to 10.4 inches OAL |
| Diameter | 1.95 inches |
| Height | 2.7 inches |
| Decibel Rating (10-inch) | 132 dB average at shooter's ear |
| Decibel Rating (4-inch) | 138 dB average at shooter's ear |
| Construction | 7075 Aluminum and 17-4 PH Stainless Steel |
| Finish | Hard Anodize and Melonite |
| Mount Type | YHM mount on factory choke threads |
| Country of Origin | Made in the USA |
The Victra-20 mounts via your shotgun's factory choke threads using Yankee Hill's VICTRA mount system. As long as your 20-gauge shotgun has removable choke tubes, the Victra-20 will thread on. It handles 3.5-inch shells, so it works with any modern 20-gauge that supports that length.
Each suppressor includes two 10-inch assembly rods, an Improved Cylinder choke, and two multi-use wrenches. You'll need a 5/32 Allen wrench (not included) for disassembly and reassembly. Additional rod kits to create 8, 6, and 4-inch configurations are sold separately.
The full 10-inch configuration averages 132 dB at the shooter's ear, while the 4-inch configuration averages 138 dB—a 6 dB increase in noise level. The 4-inch version also saves 10 ounces of weight, which many shooters prefer for balance and handling, even if they trade a bit of sound suppression.
Yes—that's the whole idea behind the modular design. You can swap rods and reconfigure the suppressor from 10 inches down to 8, 6, or 4 inches depending on your needs. You'll need a 5/32 Allen wrench and the appropriate additional rod kits, which are available separately.
