Loading...
Loading...
Loading...
Loading...
XS Sights
The XS Sights R3D night sights for Kimber K6 revolver deliver the contrast and brightness you need when every shot counts—in daylight or darkness. This front sight replacement features XS's proven 3-dot tritium design with a green Ember Glow Dot that charges from ambient light and glows strongest in low-light conditions. If you carry a K6S and want sights that perform reliably across the full spectrum of shooting scenarios, the R3D green front sight is a direct upgrade from stock sights.
The green lamp on the front sight is brighter than the dual rear tritium vials, which prevents the confusion of mixing front and rear sight glowing elements in darkness. The front blade measures 0.145" wide, while the rear notch opens to 0.170", creating better visibility of the front sight picture during target acquisition. The blackened rear sight area boosts contrast against your front sight, sharpening your sight picture whether you're at the range or trusting your revolver for defense.
Installation is straightforward: use a sight pusher tool or a hammer and punch to drift the front sight into place. This kit includes the front sight only, so your existing K6S rear sights remain in place. Note that R3D sights fit the Kimber K6S but will not work on the K6xs model.
| Front Sight Blade Width | 0.145" (3.68 mm) |
| Rear Notch Width | 0.170" (4.32 mm) |
| Front Sight Color | Green with Ember Glow Dot |
| Sight Type | Tritium Night Sights (3-dot) |
| Compatible Model | Kimber K6S |
| Package Contents | Front sight only |
No. These sights are designed for the Kimber K6S revolver only and will not fit the K6xs model.
This package includes the front sight only. You'll keep your existing K6S rear sights in place; this upgrade replaces the front sight with the brighter tritium lamp and green Ember Glow Dot.
The Kimber K6S is chambered in .357 Magnum. These XS R3D sights are designed for use with K6S firearms, including those firing .357 Magnum ammunition.
You can install these sights using a sight pusher tool for a precise fit, or with a hammer and punch if you prefer the traditional method. Both approaches work effectively.
XS Sights
The XS Sights R3D night sights for Kimber K6 revolver deliver the contrast and brightness you need when every shot counts—in daylight or darkness. This front sight replacement features XS's proven 3-dot tritium design with a green Ember Glow Dot that charges from ambient light and glows strongest in low-light conditions. If you carry a K6S and want sights that perform reliably across the full spectrum of shooting scenarios, the R3D green front sight is a direct upgrade from stock sights.
The green lamp on the front sight is brighter than the dual rear tritium vials, which prevents the confusion of mixing front and rear sight glowing elements in darkness. The front blade measures 0.145" wide, while the rear notch opens to 0.170", creating better visibility of the front sight picture during target acquisition. The blackened rear sight area boosts contrast against your front sight, sharpening your sight picture whether you're at the range or trusting your revolver for defense.
Installation is straightforward: use a sight pusher tool or a hammer and punch to drift the front sight into place. This kit includes the front sight only, so your existing K6S rear sights remain in place. Note that R3D sights fit the Kimber K6S but will not work on the K6xs model.
| Front Sight Blade Width | 0.145" (3.68 mm) |
| Rear Notch Width | 0.170" (4.32 mm) |
| Front Sight Color | Green with Ember Glow Dot |
| Sight Type | Tritium Night Sights (3-dot) |
| Compatible Model | Kimber K6S |
| Package Contents | Front sight only |
No. These sights are designed for the Kimber K6S revolver only and will not fit the K6xs model.
This package includes the front sight only. You'll keep your existing K6S rear sights in place; this upgrade replaces the front sight with the brighter tritium lamp and green Ember Glow Dot.
The Kimber K6S is chambered in .357 Magnum. These XS R3D sights are designed for use with K6S firearms, including those firing .357 Magnum ammunition.
You can install these sights using a sight pusher tool for a precise fit, or with a hammer and punch if you prefer the traditional method. Both approaches work effectively.
