Loading...
Loading...
Loading...
Loading...
AOB
The Wheeler 1-piece bolt-action scope mount for Savage 10 in 1" medium is engineered as a single-unit solution for mounting optics on your Savage bolt rifle. Unlike split-ring designs, a one-piece mount eliminates the gap between the rings, offering increased rigidity and a more unified platform for your scope. Built from 6061 aluminum, this mount combines strength with light weight—important when you're hauling your rifle through the field or settling in for a long session at the range.
The six-hole ring configuration gives you flexible positioning options for eye relief and sight picture, while the swing-out anti-cant level helps you achieve a truly level reticle every time you mount your scope. A canted scope throws off your point of aim, especially at distance, so this leveling feature is a practical advantage whether you're hunting or benchrest shooting. The 20 MOA elevation built into the base is useful for shooters running longer-distance setups, giving you additional upward adjustment without eating into your scope's internal elevation turret.
This mount is purpose-built for Savage 10 and 110 bolt-actions, so you know you're getting a fit engineered for your rifle—no guessing, no forcing. If you run a different rifle platform, Wheeler makes compatible versions for other common actions, but this one is matched to your Savage. The 1" ring size fits standard 1" scope tubes, the most common diameter in hunting and target optics.
| Brand | AOB Wheeler |
| Mount Type | One-piece bolt-action scope mount |
| Rifle Compatibility | Savage 10, Savage 110 |
| Ring Size | 1" medium |
| Material | 6061 aluminum |
| Ring Holes | 6 |
| Base Elevation | 20 MOA |
Yes. This mount is engineered specifically for Savage 10 and 110 bolt-action rifles. The mounting pattern and recoil lug interface are designed for these models.
The 1" medium ring is sized for standard 1" diameter scope tubes. This covers the majority of hunting and range optics on the market. If your scope is 30mm or 34mm, you'll need a different ring size.
The base comes with 20 MOA of built-in upward angle. This gives you extra elevation adjustment range, useful if you're dialing for longer distances or want more headroom in your scope's turret. It tilts the entire mount forward by about 6.9 degrees.
A one-piece mount eliminates the gap between the two rings, creating a single rigid platform with no joint. This means less flex under recoil, better consistency, and a more secure hold on your scope. Split-ring mounts work fine, but one-piece designs are generally preferred for precision shooting.
AOB
The Wheeler 1-piece bolt-action scope mount for Savage 10 in 1" medium is engineered as a single-unit solution for mounting optics on your Savage bolt rifle. Unlike split-ring designs, a one-piece mount eliminates the gap between the rings, offering increased rigidity and a more unified platform for your scope. Built from 6061 aluminum, this mount combines strength with light weight—important when you're hauling your rifle through the field or settling in for a long session at the range.
The six-hole ring configuration gives you flexible positioning options for eye relief and sight picture, while the swing-out anti-cant level helps you achieve a truly level reticle every time you mount your scope. A canted scope throws off your point of aim, especially at distance, so this leveling feature is a practical advantage whether you're hunting or benchrest shooting. The 20 MOA elevation built into the base is useful for shooters running longer-distance setups, giving you additional upward adjustment without eating into your scope's internal elevation turret.
This mount is purpose-built for Savage 10 and 110 bolt-actions, so you know you're getting a fit engineered for your rifle—no guessing, no forcing. If you run a different rifle platform, Wheeler makes compatible versions for other common actions, but this one is matched to your Savage. The 1" ring size fits standard 1" scope tubes, the most common diameter in hunting and target optics.
| Brand | AOB Wheeler |
| Mount Type | One-piece bolt-action scope mount |
| Rifle Compatibility | Savage 10, Savage 110 |
| Ring Size | 1" medium |
| Material | 6061 aluminum |
| Ring Holes | 6 |
| Base Elevation | 20 MOA |
Yes. This mount is engineered specifically for Savage 10 and 110 bolt-action rifles. The mounting pattern and recoil lug interface are designed for these models.
The 1" medium ring is sized for standard 1" diameter scope tubes. This covers the majority of hunting and range optics on the market. If your scope is 30mm or 34mm, you'll need a different ring size.
The base comes with 20 MOA of built-in upward angle. This gives you extra elevation adjustment range, useful if you're dialing for longer distances or want more headroom in your scope's turret. It tilts the entire mount forward by about 6.9 degrees.
A one-piece mount eliminates the gap between the two rings, creating a single rigid platform with no joint. This means less flex under recoil, better consistency, and a more secure hold on your scope. Split-ring mounts work fine, but one-piece designs are generally preferred for precision shooting.
